Page 1

Open front screen

Service Manual

JS130W, JS145W, JS160W, JS175W Section 1 - General Information Section 2 - Care & Safety Section 3 - Maintenance Section B - Body & Framework Section C - Electrics Section D - Controls Section E - Hydraulics Section F - Transmission Section K - Engine

Publication No.

9803/6590-3

World Class Customer Support Copyright © 2004 JCB SERVICE. All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any other means, electronic, mechanical, photocopying or otherwise, without prior permission from JCB SERVICE. Issued by JCB Technical Publications, JCB Aftermarket Training, Woodseat, Rocester, Staffordshire, ST14 5BW, England. Tel +44 1889 591300 Fax +44 1889 591400


Section 0 - Service Manual

Notes:

0-0

9803/6590-3

0-0


Open front screen

Section 1

General Information Section 1 - General Information Section 2 - Care & Safety Section 3 - Maintenance Section B - Body & Framework Section C - Electrics Section D - Controls Section E - Hydraulics Section F - Transmission Section K - Engine

Publication No.

9803/6590-3

World Class Customer Support Copyright Š 2004 JCB SERVICE. All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any other means, electronic, mechanical, photocopying or otherwise, without prior permission from JCB SERVICE. Issued by JCB Technical Publications, JCB Aftermarket Training, Woodseat, Rocester, Staffordshire, ST14 5BW, England. Tel +44 1889 591300 Fax +44 1889 591400


Section 1 - General Information

Notes:

1-0

9803/6590-3

1-0


Section 1 - General Information Contents Page No. Introduction About this Manual ...................................................................................... 1-1 Identifing Your Machine ............................................................................. 1-3 Torque Settings Zinc Plated Fasteners and Dacromet Fasteners ....................................... 1-5 Hydraulic Connections ............................................................................... 1-9 Service Tools Numerical List .......................................................................................... 1-13 Tool Detail Reference .............................................................................. 1-16 Service Consumables Sealing and Retaining Compounds ......................................................... 1-35 Terms and Definitions Colour Coding .......................................................................................... 1-37

1-i

1-i


Section 1 - General Information Contents

1-ii

Page No.

1-ii


Section 1 - General Information

Introduction About this Manual Machine Model and Serial Number This manual provides information for the following model(s) in the JCB machine range: JCB JS130W from serial number 01060300 to 01060999. JCB JS145W from serial number 01314300 to 01314599. JCB JS145W from serial number 01458000 to 01458999. JCB JS145W from serial number 01613000 to 1613999. JCB JS160W from serial number 01421600 to 01421799. JCB JS160W from serial number 01451000 to 01451999.

Where a torque setting is given as a single figure it may be varied by plus or minus 3%. Torque figures indicated are for dry threads, hence for lubricated threads may be reduced by one third. The manufacturer's policy is one of continuous improvement. The right to change the specification of the machine without notice is reserved. No responsibility will be accepted for discrepancies which may occur between specifications of the machine and the descriptions contained in this publication. Finally, please remember above all else safety must come first!

Section Numbering T11-005

JCB JS175W from serial number 01505100 to 01505284.

The manual is compiled in sections, the first three are numbered and contain information as follows:

JCB JS175W from serial number 01505286 to 01505499. 1

General Information - includes torque settings and service tools.

2

Care and Safety - includes warnings and cautions pertinent to aspects of workshop procedures etc.

3

Maintenance - includes service schedules and recommended lubricants for all the machine.

Using the Service Manual T11-004

This publication is designed for the benefit of JCB Distributor Service Engineers who are receiving, or have received, training by JCB Technical Training Department. These personnel should have a sound knowledge of workshop practice, safety procedures, and general techniques associated with the maintenance and repair of hydraulic earthmoving equipment. The illustrations in this publication are for guidance only. Where the machines differ, the text and/or the illustration will specify. General warnings in Section 2 are repeated throughout the manual, as well as specific warnings. Read all safety statements regularly, so you do not forget them.

The remaining sections are alphabetically coded and deal with Dismantling, Overhaul etc. of specific components, for example: A

Attachments

B

Body and Framework, etc.

Section contents, technical data, circuit descriptions, operation descriptions etc. are inserted at the beginning of each alphabetically coded section.

Renewal of oil seals, gaskets, etc., and any component showing obvious signs of wear or damage is expected as a matter of course. It is expected that components will be cleaned and lubricated where appropriate, and that any opened hose or pipe connections will be blanked to prevent excessive loss of hydraulic fluid and ingress of dirt.

1-1

9803-6590-3

1-1


Section 1 - General Information Introduction About this Manual

Left Side, Right Side In this manual, 'left' A and 'right' B mean your left and right when you are seated correctly in the machine.

B

A Cross References T1-004_2

In this publication, page cross references are made by presenting the subject title printed in bold, italic and underlined. It is preceeded by the 'go to' symbol. The number of the page upon which the subject begins, is indicated within the brackets. For example: K Cross References ( T 1-2).

1-2

9803-6590-3

1-2


Section 1 - General Information Introduction Identifing Your Machine

Identifing Your Machine Machine Identification Plate

Typical Product Identification Number (PIN)

Your machine has a data plate located on the outside the cab as shown at A. The machine serial number is inscribed at B which is the base plate of the rear frame.

1

2

3

4

JCB

JW175

C

01018354

1

World Manufacturer Identification (JCB)

2

Machine Type and Model (JW175 = JS175 Wheeled)

3

Randomly generated check letter.

4

Machine Serial Number (01018354)

Fig 1.

Fig 2.

1-3

9803-6590-3

1-3


Section 1 - General Information Introduction Identifing Your Machine

Component Identification Plates

Axle Serial Plate

Typical Engine Identification Number

The axle serial number is stamped on a plate D mounted to the rear face of the axle.

If the engine is replaced by a new one, the data plate serial number will be wrong. Either stamp the new number on the plate or stamp out the old one. This will prevent the wrong number being quoted when you order replacement parts. The engine number is stamped at A.

When replacement parts are required, always ensure that the correct parts are obtained, e.g. in the case of gear replacements, always check the part number stamped on the gear, and the number of teeth. When ordering replacement parts, quote the details on the serial plate as shown.

A

Fig 3. 4JJ Fig 5.

A Fig 4. 4HK

1-4

9803-6590-3

1-4


Section 1 - General Information Torque Settings Zinc Plated Fasteners and Dacromet Fasteners

Torque Settings Zinc Plated Fasteners and Dacromet Fasteners T11-002

Introduction

Bolts and Screws

Some external fasteners on JCB machines are manufactured using an improved type of corrosion resistant finish. This type of finish is called Dacromet and replaces the original Zinc and Yellow Plating used on earlier machines.

Use the following torque setting tables only where no torque setting is specified in the text.

The two types of fasteners can be readily identified by colour and part number suffix. K Table 1. Fastener Types ( T 1-5).

Torque settings are given for the following conditions:

Fastener Type

Table 1. Fastener Types Colour Part No. Suffix

Note: Dacromet fasteners are lubricated as part of the plating process, do not lubricate.

Condition 1 – Un-lubricated fasteners – Zinc fasteners – Yellow plated fasteners

Zinc and Yellow

Golden finish

'Z' (e.g. 1315/3712Z)

Dacromet

Mottled silver finish 'D' (e.g. 1315/3712D)

Condition 2 – Zinc flake (Dacromet) fasteners

Note: As the Dacromet fasteners have a lower torque setting than the Zinc and Yellow fasteners, the torque figures used must be relevant to the type of fastener. Note: A Dacromet bolt should not be used in conjunction with a Zinc or Yellow plated nut, as this could change the torque characteristics of the torque setting further. For the same reason, a Dacromet nut should not be used with a Zinc or Yellow plated bolt.

– Lubricated zinc and yellow plated fasteners – Where there is a natural lubrication. For example, cast iron components

Verbus Ripp Bolts

Note: All bolts used on JCB machines are high tensile and must not be replaced by bolts of a lesser tensile specification. Note: Dacromet bolts, due to their high corrosion resistance are used in areas where rust could occur. Dacromet bolts are only used for external applications. They are not used in applications such as gearbox or engine joint seams or internal applications.

1-5

Fig 1. Torque settings for these bolts are determined by the application. Refer to the relevant procedure for the required settings.

9803-6590-3

1-5


Section 1 - General Information Torque Settings Zinc Plated Fasteners and Dacromet Fasteners Table 2. Torque Settings - UNF Grade 'S' Fasteners Hexagon (A/F) Condition 1

Bolt Size in.

mm

in.

Nm

kgf m

lbf ft

Nm

kgf m

lbf ft

1/4

6.3

7/16

11.2

1.1

8.3

10.0

1.0

7.4

5/16

7.9

1/2

22.3

2.3

16.4

20.0

2.0

14.7

3/8

9.5

9/16

40.0

4.1

29.5

36.0

3.7

26.5

7/16

11.1

5/8

64.0

6.5

47.2

57.0

5.8

42.0

1/2

12.7

3/4

98.00

10.0

72.3

88.0

9.0

64.9

9/16

14.3

13/16

140.0

14.3

103.2

126.0

12.8

92.9

5/8

15.9

15/16

196.0

20.0

144.6

177.0

18.0

130.5

3/4

19.0

1 1/8

343.0

35.0

253.0

309.0

31.5

227.9

7/8

22.2

1 15/16

547.0

55.8

403.4

492.0

50.2

362.9

1

25.4

1 1/2

814.0

83.0

600.4

732.0

74.6

539.9

1 1/8

31.7

1 7/8

1181.0

120.4

871.1

1063.0

108.4

784.0

1 1/4

38.1

2 1/4

1646.0

167.8

1214.0

1481.0

151.0

1092.3

Table 3. Torque Settings - Metric Grade 8.8 Fasteners Hexagon (A/F) Condition 1

Bolt Size ISO Metric Thread

1-6

Condition 2

mm

mm

Nm

kgf m

Condition 2

lbf ft

Nm

kgf m

lbf ft

M5

5

8

5.8

0.6

4.3

5.2

0.5

3.8

M6

6

10

9.9

1.0

7.3

9.0

0.9

6.6

M8

8

13

24.0

2.4

17.7

22.0

2.2

16.2

M10

10

17

47.0

4.8

34.7

43.0

4.4

31.7

M12

12

19

83.0

8.5

61.2

74.0

7.5

54.6

M16

16

24

205.0

20.9

151.2

184.0

18.8

135.7

M20

20

30

400.0

40.8

295.0

360.0

36.7

265.5

M24

24

36

690.0

70.4

508.9

621.0

63.3

458.0

M30

30

46

1372.0

139.9

1011.9

1235.0

125.9

910.9

M36

36

55

2399.0

244.6

1769.4

2159.0

220.0

1592.4

9803-6590-3

1-6


Section 1 - General Information Torque Settings Zinc Plated Fasteners and Dacromet Fasteners Table 4. Metric Grade 10.9 Fasteners Hexagon (A/F) Condition 1

Bolt Size ISO Metric Thread

mm

mm

Nm

kgf m

Condition 2 lbf ft

Nm

kgf m

lbf ft

M5

5

8

8.1

0.8

6.0

7.3

0.7

5.4

M6

6

10

13.9

1.4

10.2

12.5

1.3

9.2

M8

8

13

34.0

3.5

25.0

30.0

3.0

22.1

M10

10

17

67.0

6.8

49.4

60.0

6.1

44.2

M12

12

19

116.0

11.8

85.5

104.0

10.6

76.7

M16

16

24

288.0

29.4

212.4

259.0

26.4

191.0

M20

20

30

562.0

57.3

414.5

506.0

51.6

373.2

M24

24

36

971.0

99.0

716.9

874.0

89.1

644.6

M30

30

46

1930.0

196.8

1423.5

1737.0

177.1

1281.1

M36

36

55

3374.0

344.0

2488.5

3036.0

309.6

2239.2

Table 5. Metric Grade 12.9 Fasteners Hexagon (A/F) Condition 1

Bolt Size

Condition 2

ISO Metric Thread

mm

mm

Nm

kgf m

lbf ft

Nm

kgf m

lbf ft

M5

5

8

9.8

1.0

7.2

8.8

0.9

6.5

M6

6

10

16.6

1.7

12.2

15.0

1.5

11.1

M8

8

13

40.0

4.1

29.5

36.0

3.7

26.5

M10

10

17

80.0

8.1

59.0

72.0

7.3

53.1

M12

12

19

139.0

14.2

102.5

125.0

12.7

92.2

M16

16

24

345.0

35.2

254.4

311.0

31.7

229.4

M20

20

30

674.0

68.7

497.1

607.0

61.9

447.7

M24

24

36

1165.0

118.8

859.2

1048.0

106.9

773.0

M30

30

46

2316.0

236.2

1708.2

2084.0

212.5

1537.1

M36

36

55

4049.0

412.9

2986.4

3644.0

371.6

2687.7

1-7

9803-6590-3

1-7


Section 1 - General Information Torque Settings Zinc Plated Fasteners and Dacromet Fasteners Table 6. Torque Settings - Rivet Nut Bolts/Screws Bolt Size ISO Metric Thread

mm

Nm

kgf m

lbf ft

M3

3

1.2

0.1

0.9

M4

4

3.0

0.3

2.0

M5

5

6.0

0.6

4.5

M6

6

10.0

1.0

7.5

M8

8

24.0

2.5

18.0

M10

10

48.0

4.9

35.5

M12

12

82.0

8.4

60.5

Table 7. Torque Settings - Internal Hexagon Headed Cap Screws (Zinc) Bolt Size

1-8

ISO Metric Thread

Nm

kgf m

lbf ft

M3

2.0

0.2

1.5

M4

6.0

0.6

4.5

M5

11.0

1.1

8.0

M6

19.0

1.9

14.0

M8

46.0

4.7

34.0

M10

91.0

9.3

67.0

M12

159.0

16.2

117.0

M16

395.0

40.0

292.0

M18

550.0

56.0

406.0

M20

770.0

79.0

568.0

M24

1332.0

136.0

983.0

9803-6590-3

1-8


Section 1 - General Information Torque Settings Hydraulic Connections

Hydraulic Connections T11-003

'O' Ring Face Seal System Adaptors Screwed into Valve Blocks Adaptor screwed into valve blocks, seal onto an 'O' ring which is compressed into a 45° seat machined into the face of the tapped port. Table 8. Torque Settings - BSP Adaptors BSP Adaptor Hexagon (A/F) Size

1-9

in.

mm

Nm

kgf m

lbf ft

1/4

19.0

18.0

1.8

13.0

3/8

22.0

31.0

3.2

23.0

1/2

27.0

49.0

5.0

36.0

5/8

30.0

60.0

6.1

44.0

3/4

32.0

81.0

8.2

60.0

1

38.0

129.0

13.1

95.0

1 1/4

50.0

206.0

21.0

152.0

Table 9. Torque Settings - SAE Connections SAE Port Hexagon (A/F)

SAE Tube Size

Thread Size

mm

Nm

kgf m

lbf ft

4

7/16 - 20

15.9

20.0 - 28.0

2.0 - 2.8

16.5 - 18.5

6

9/16 - 18

19.1

46.0 - 54.0

4.7 - 5.5

34.0 - 40.0

8

3/4 - 16

22.2

95.0 - 105.0

9.7 - 10.7

69.0 - 77.0

10

7/8 - 14

27.0

130.0 - 140.0

13.2 - 14.3

96.0 - 104.0

12

1 1/16 - 12

31.8

190.0 - 210.0

19.4 - 21.4

141.0 - 155.0

16

1 5/16 - 12

38.1

290.0 - 310.0

29.6 - 31.6

216.0 - 230.0

20

1 5/8

47.6

280.0 - 380.0

28.5 - 38.7

210.0 - 280.0

9803-6590-3

1-9


Section 1 - General Information Torque Settings Hydraulic Connections Hoses Screwed into Adaptors

Fig 2. Hoses 2-B screwed into adaptors 2-A seal onto an `O' ring 2-C which is compressed into a 45° seat machined into the face of the adaptor port.

BSP Hose Size in.

1-10

Note: Dimension 2-D will vary depending upon the torque applied.

Table 10. BSP Hose - Torque Settings Hexagon (A/F) mm

Nm

1/8

14.0

14.0 - 16.00

1.4 - 1.6

10.3 - 11.8

1/4

19.0

24.0 - 27.0

2.4 - 2.7

17.7 - 19.9

3/8

22.0

33.0 - 40.0

3.4 - 4.1

24.3 - 29.5

1/2

27.0

44.0 - 50.0

4.5 - 5.1

32.4 - 36.9

5/8

30.0

58.0 - 65.0

5.9 - 6.6

42.8 - 47.9

3/4

32.0

84.0 - 92.0

8.6 - 9.4

61.9 - 67.8

1

38.0

115.0 - 126.0

11.7 - 12.8

84.8 - 92.9

1 1/4

50.0

189.0 - 200.0

19.3 - 20.4

139.4 - 147.5

1 1/2

55.0

244.0 - 260.0

24.9 - 26.5

180.0 - 191.8

9803-6590-3

kgf m

lbf ft

1-10


Section 1 - General Information Torque Settings Hydraulic Connections Adaptors into Component Connections with Bonded Washers Table 11. BSP Adaptors with Bonded Washers - Torque Settings BSP Size

1-11

in.

Nm

kgf m

lbf ft

1/8

20.0

2.1

15.0

1/4

34.0

3.4

25.0

3/8

75.0

7.6

55.0

1/2

102.0

10.3

75.0

5/8

122.0

12.4

90.0

3/4

183.0

18.7

135.0

1

203.0

20.7

150.0

1 1/4

305.0

31.0

225.0

1 1/2

305.0

31.0

225.0

9803-6590-3

1-11


Section 1 - General Information Torque Settings Hydraulic Connections

'Torque Stop' Hose System

Fig 3. `Torque Stop' Hoses 3-B screwed into adaptors 3-A seal onto an 'O' ring 3-C which is compressed into a 45° seat machined in the face of the adaptor port. To prevent the 'O' ring being damages as a result of over tightening, 'Torque

Stop' Hoses have an additional shoulder 3-D, which acts as a physical stop. Note: Minimum dimension 3-E fixed by shoulder 3-D.

Table 12. BSP `Torque Stop' Hose - Torque Settings BSP Hose Size Hexagon (A/F)

1-12

in.

mm

Nm

kgf m

lbf ft

1/8

14.0

14.0

1.4

10.0

1/4

19.0

27.0

2.7

20.0

3/8

22.0

40.0

4.1

30.0

1/2

27.0

55.0

5.6

40.0

5/8

30.0

65.0

6.6

48.0

3/4

32.0

95.0

9.7

70.0

1

38.0

120.0

12.2

89.0

1 1/4

50.0

189.0

19.3

140.0

1 1/2

55.0

244.0

24.9

180.0

9803-6590-3

1-12


Section 1 - General Information

Service Tools Numerical List The tools listed in the table are special tools required for carrying out the procedures described in this manual. These tools are available from JCB Service. Some tools are available as kits or sets, the part numbers for parts within such kits or sets are not listed here. For full

details of all tools, including the content of kits and sets, refer to Tool Detail Reference, Section 1. Note: Tools other than those listed will be required. It is expected that such general tools will be available in any well equipped workshop or be available locally from any good tool supplier.

Part Number

Description

-

Bonded Washers - see Tool Detail Reference (Section 1) for content

E

-

Female Cone Blanking Plugs - see Tool Detail Reference (Section 1) for content

E

-

Female Connectors - see Tool Detail Reference (Section 1) for content

E

-

Hydraulic Flow Test Equipment - see Tool Detail Reference (Section 1) for content

E

-

Hydraulic Hand Pump Equipment - see Tool Detail Reference (Section 1) for content

E

-

Male Adapters - BSP x BSP - see Tool Detail Reference (Section 1) for content

E

-

Male Adapters - BSP x NPT (USA only) - see Tool Detail Reference (Section 1) for content

E

-

Male Cone Blanking Caps - see Tool Detail Reference (Section 1) for content

E

-

Pressure Test Points - Adaptors - see Tool Detail Reference (Section 1) for content

E

-

Pressure Test Points - 'T' Adaptors - see Tool Detail Reference (Section 1) for content

E

-

Rivet Nut Tool - see Tool Detail Reference (Section 1) for content

B

331/22966

Pump Drive Alignment Tool

E

331/31069

Test Block for A.R.V.

E

4104/1310

Hand Cleaner

B

892/00039

Spool Clamp

E

892/00041

De-glazing Tool

K

892/00137

Micro-Bore Hose

E

892/00180

Seal Fitting Tool

H

892/00223

Hand Pump

E

892/00253

Hydraulic Circuit Pressure Test Kit - see Tool Detail Reference (Section 1) for content

E

892/00254

Hose

E

892/00271

Adapter

E

892/00272

Adapter

E

892/00273

Adapter

E

892/00274

Adapter

E

1-13

See Section

9803-6590-3

1-13


Section 1 - General Information Service Tools Numerical List Part Number

Description

See Section

892/00275

Adapter

E

892/00276

Adapter

E

892/00277

Adapter

E

892/00279

Gauge

E

892/00280

Gauge

E

892/00281

AVO Meter

C

892/00284

Digital Tachometer

C

892/00285

Hyd. Oil Temperature Probe

C

892/00298

Fluke Meter

C

892/00334

Ram Seal Fitting Tool

E

892/00346

Gauge

E

892/00347

Connector

E

892/00706

Test Probe

E

892/00842

Glass Lifter

B

892/00843

Folding Stand for Holding Glass

B

892/00845

Cartridge Gun

B

892/00846

Glass Extractor (Handles)

B

892/00847

Nylon Spatula

B

892/00848

Wire Starter

B

892/00849

Braided Cutting Wire

B

892/01016

Ram Protection Sleeve for 25 mm Rod Diameter

E

892/01017

Ram Protection Sleeve for 30 mm Rod Diameter

E

892/01018

Ram Protection Sleeve for 40 mm Rod Diameter

E

892/01019

Ram Protection Sleeve for 50 mm Rod Diameter

E

892/01020

Ram Protection Sleeve for 50 mm Rod Diameter (slew ram)

E

892/01021

Ram Protection Sleeve for 60 mm Rod Diameter

E

892/01022

Ram Protection Sleeve for 60 mm Rod Diameter (slew ram)

E

892/01023

Ram Protection Sleeve for 65 mm Rod Diameter

E

892/01024

Ram Protection Sleeve for 70 mm Rod Diameter

E

892/01025

Ram Protection Sleeve for 75 mm Rod Diameter

E

892/01026

Ram Protection Sleeve for 80 mm Rod Diameter

E

892/01027

Piston Seal Assembly Tool

E

926/15500

Rubber Spacer Blocks

B

992/02800

ARV Extractor

E

992/09300

Hexagon Spanner 55mm A/F

E

992/09400

Hexagon Spanner 65mm A/F

E

992/09500

Hexagon Spanner 75mm A/F

E

1-14

9803-6590-3

1-14


Section 1 - General Information Service Tools Numerical List Part Number

Description

See Section

992/09600

Hexagon Spanner 85mm A/F

E

992/09700

Hexagon Spanner 95mm A/F

E

992/09900

Hexagon Spanner 115mm A/F

E

992/10000

Hexagon Spanner 125mm A/F

E

992/10100

Spool Clamp

E

992/12300

12V Mobile Oven

B

992/12400

24V Static Oven (2 Cartridge)

B

992/12800

Cut-Out Knife

B

992/12801

'L' Blades

B

993/68100

Slide Hammer Kit - see Tool Detail Reference (Section 1) for content

B

1-15

9803-6590-3

1-15


Section 1 - General Information Service Tools Tool Detail Reference

Tool Detail Reference Section B - Body and Framework Note: Not all service tools are illustrated.

Fig 1. 993/68100 Slide Hammer Kit 1

993/68101

Slide Hammer

7

993/68107

Bar - M20 x M20 X 800 mm

2

993/68102

End Stops

8

993/68108

Adaptor - M20 x 7/8" UNF

3

993/68103

Adaptor - M20 x 5/8" UNF

9

993/68109

Adaptor - M20 x M12

4

993/68104

Adaptor - M20 x 1" UNF

10

993/68110

Adaptor - M20 x 5/8" UNF (Shoulder)

5

993/68105

Adaptor - M20 x M20

11

993/68111

Adaptor - M20 x 1/2" UNF

6

993/68106

Adaptor - M20 x M24 1

826/01099

M6 x 16 mm Rivet Nut

826/01101

M6 x 19 mm Rivet Nut

826/01102

M8 x 18 mm Rivet Nut

826/01103

M8 x 21 mm Rivet Nut

826/01104

M10 x 23 mm Rivet Nut

826/01105A M10 x 26 mm Rivet Nut 2

-

Installation Tool available from: Bollhoff Fastenings Ltd (www.bollhof.com)

Fig 2. Rivet Nut Tool Minimum 2 off - Essential for glass installation, 2 required to handle large panes of glass. Ensure suction cups are protected from damage during storage.

Fig 3. 892/00842 Glass Lifter

1-16

9803-6590-3

1-16


Section 1 - General Information Service Tools Tool Detail Reference

Fig 7. 892/00847 Nylon Spatula General tool used for smoothing sealants - also used to re-install glass in rubber glazing because metal tools will chip the glass edge.

Fig 4. 892/00843 Folding Stand Essential for preparing new glass prior to installation.

Fig 8. 892/00848 Wire Starter Used to access braided cutting wire through original polyurethane seal. K Fig 9. ( T 1-18).

Fig 5. 892/00845 Cartridge Gun Hand operated. Essential for the application of sealants, polyurethane materials etc.

Fig 6. 892/00846 Glass Extractor (Handles) Used with braided cutting wire to cut out broken glass. K Fig 9. ( T 1-18).

1-17

9803-6590-3

1-17


Section 1 - General Information Service Tools Tool Detail Reference

Fig 9. 892/00849 Braided Cutting Wire

Fig 12. 992/12400 Static Oven 240V

Consumable heavy duty cut-out wire used with the glass extraction tool. K Fig 6. ( T 1-17). Approx 25 m length.

Required to pre-heat adhesive prior to use. No plug supplied. Note: 110V models available upon request - contact JCB Technical Service.

Fig 10. 926/15500 Rubber Spacer Blocks Used to provide the correct set clearance between glass edge and cab frame. Unit quantity = 500 off.

Fig 13. 992/12800 Cut-Out Knife Used to remove broken glass.

Fig 11. 992/12300 Mobile Oven 12V 1 cartridge capacity. Required to pre-heat adhesive prior to use. It is fitted with a male plug (703/23201) which fits into a female socket (715/04300).

1-18

Fig 14. 992/12801 'L' Blades 25 mm (1 in.) cut. Replacement blades for cut-out knife. K Fig 13. ( T 1-18). Unit quantity = 5 off.

9803-6590-3

1-18


Section 1 - General Information Service Tools Tool Detail Reference

Fig 15. 4104/1310 Hand Cleaner Special blend for the removal of polyurethane adhesives (454g; 1 lb tub).

1-19

9803-6590-3

1-19


Section 1 - General Information Service Tools Tool Detail Reference

Section C - Electrics Note: Not all service tools are illustrated.

1

2 D

C

B

A

J

E F

H

G

3

5 4 Fig 16. 892/00298 Fluke Meter

6 Fig 19. 892/01174

Fig 17. 892/00285 Hydraulic Temperature Probe

1

Interconnecting cable, DLA to machine ECU diagnostics socket.

2

Interconnecting cable, DLA to machine ECU diagnostics socket.

3

Kit carrying case.

4

Interconnecting cable, DLA to laptop PC.

5

Data Link Adaptor (DLA), enables data exchange between the machine ECU (Electronic Control Unit) and a laptop PC loaded with the applicable diagnostics software.

6

Interconnecting cable, DLA to laptop PC.

Fig 18. 892/00284 Venture Microtach Digital Tachometer

1-20

9803-6590-3

1-20


Section 1 - General Information Service Tools Tool Detail Reference

Section E - Hydraulics Note: Not all service tools are illustrated. Male Adapters - BSP x BSP 1606/2052

3/8 in. x 1/4 in.

1604/0003A 3/8 in. x 3/8 in. 892/00071

3/8 in. x 3/8 in. taper

1606/0004

1/2 in. x 1/4 in.

1606/0007A 1/2 in. x 3/8 in. Fig 20. Male Adaptors

1604/0004A 1/2 in. x 1/2 in. 1606/0017

5/8 in. x 1/2 in.

1606/0008

3/4 in. x 3/8 in.

Male Adapters - BSP x NPT (USA only)

1606/0009

3/4 in. x 1/2 in.

816/00439

3/8 in. x 1/4 in.

1604/2055

3/4 in. x 3/4 in.

816/00440

1/2 in. x 1/4 in.

1606/0012

3/4 in. x 1 in.

816/15007A 3/8 in. x 3/8 in.

1606/0014

3/4 in. x 1.1/4 in.

816/15008

1606/0015

1 in. x 1.1/4 in.

892/00255

1/4 in. BSP x Test Point

892/00256

3/8 in. BSP x Test Point

892/00257

1/2 in. BSP x Test Point

1/2 in. x 3/8 in.

Fig 21. Pressure Test Adapters

892/00258

5/8 in. BSP x Test Point

816/15118

3/4 in. BSP x Test Point

892/00259

1 in BSP x Test Point

892/00260

1.1/4 in. BSP x Test Point

892/00261

5/8 in. UNF x Test Point

816/55045

1/4 in. M BSP x 1/4 in. F BSP x Test Point

816/55038

3/8 in. M BSP x 3/8 in. F BSP x Test Point

816/55040

1/2 in. M BSP x 1/2 in. F BSP x Test Point

892/00263

5/8 in. M BSP x 5/8 in. F BSP x Test Point

892/00264

3/4 in. M BSP x 3/4 in. F BSP x Test Point

892/00265

1 in. M BSP x 1 in. F BSP x Test Point

892/00266

1.1/4 in. M BSP x 1.1/4 in. F BSP x Test Point

892/00267

1.1/4 in. M BSP x 1.1/2 in. F BSP x Test Point

Fig 22. Pressure Test 'T' Adapters

1-21

9803-6590-3

1-21


Section 1 - General Information Service Tools Tool Detail Reference

Fig 23. 'T' Adapters

892/00047

3/8 in. BSP (A) x 1/4 in. BSP (B)

892/00048

1/2 in. BSP (A) x 1/4 in. BSP (B)

892/00049

5/8 in. BSP (A) x 1/4 in. BSP (B)

816/50043

3/4 in. BSP (A) x 1/4 in. BSP (B)

892/00051

1 in. BSP (A) x 1/4 in. BSP (B)

816/50005

1/2 in. BSP (A) x 1/2 in. BSP (B)

816/60096

3/4 in. BSP (A) x 3/4 in. BSP (B)

816/00017

1 in. BSP (A) x 1 in. BSP (B)

892/00055A 1/4 in. BSP 892/00056A 3/8 in. BSP 892/00057

1/2 in. BSP

892/00058A 5/8 in. BSP 892/00059A 3/4 in. BSP Fig 24. Female Blanking Caps

892/00060

1 in. BSP

816/90045

1/4 in. BSP

816/00189A 3/8 in. BSP 816/00190A 1/2 in. BSP

Fig 25. Male Cone Blanking Caps

816/90022

5/8 in. BSP

816/90274

3/4 in. BSP

816/90205

1 in. BSP

892/00074

3/8 in. BSP x 3/8 in. BSP

892/00075

1/2 in. BSP x 1/2 in. BSP

892/00076

5/8 in. BSP x 5/8 in. BSP

892/00077

3/4 in. BSP x 3/4 in. BSP

1406/0011

1/4 in. BSP

1406/0018

1/2 in. BSP

1406/0014

5/8 in. BSP

Fig 26. Female Connectors

Fig 27. Bonded Washers

1-22

1406/0021

3/4 in. BSP

1406/0029

1.1/4 in. BSP

9803-6590-3

1-22


Section 1 - General Information Service Tools Tool Detail Reference

Fig 28. Ram Protection Sleeves

892/01016

For 25 mm Rod Diameter

892/01017

For 30 mm Rod Diameter

892/01018

For 40 mm Rod Diameter

892/01019

For 50 mm Rod Diameter

892/01020

For 50 mm Rod Diameter (slew ram)

892/01021

For 60 mm Rod Diameter

892/01022

For 60 mm Rod Diameter (slew ram)

892/01023

For 65 mm Rod Diameter

892/01024

For 70 mm Rod Diameter

892/01025

For 75 mm Rod Diameter

892/01026

For 80 mm Rod Diameter

892/00167

For 90 mm Rod Diameter

7mm 11o 20mm

10mm

Fig 29. 892/00334 Ram Seal Fitting Tool 5mm

R

m 3m

110mm 175mm 3o

Fig 30. Hexagon Spanners for Ram Pistons and End Caps 992/09300

55mm A/F

992/09400

65mm A/F

992/09500

75mm A/F

992/09600

85mm A/F

992/09700

95mm A/F

992/09900

115mm A/F

992/10000

125mm A/F

1-23

R

1.4

mm

Fig 31. 892/01027 Piston Seal Assembly Tool

9803-6590-3

1-23


Section 1 - General Information Service Tools Tool Detail Reference 892/00268

Flow Monitoring Unit

892/00269

Sensor Head 0 - 100 l/min (0 - 22 UK gal/min)

892/00273

Sensor Head 0 - 380 l/min (0 - 85.5 UK gal/min)

892/00293

Connector Pipe

892/00270

Load Valve

1406/0021

Bonded Washer

1604/0006A Adapter 3/4 in M x 3/4 in M BSP

Fig 32. Flow Test Equipment

1

2

3

1612/2054

Adapter 3/4 in F x 3/4 in M BSP

892/00271

Adapter 3/4 in F x 5/8 in M BSP

892/00272

Adapter 5/8 in F x 3/4 in M BSP

816/20008

Adapter 3/4 in F x 1/2 in M BSP

892/00275

Adapter 1/2 in F x 3/4 in M BSP

892/00276

Adapter 3/4 in F x 3/8 in M BSP

892/00277

Adapter 3/8 in F x 3/4 in M BSP

1606/0015

Adapter 1.1/4 in M BSP x 1 in M BSP

892/00078

Connector 1 in F x 1 in F BSP

1604/0008

Adapter 1 in M x 1 in M BSP

1604/0008

Adapter 1 in M x 3/4 in M BSP

816/20013

Adapter 3/4 in F x 1 in M BSP

892/00201

Replacement Gauge 0-20 bar (0-300 lbf/in2)

892/00202

Replacement Gauge 0-40 bar (0-600 lbf/in2)

892/00203

Replacement Gauge 0-400 bar (0-6000 lbf/in2)

892/00254

Replacement Hose

993/69800

Seal Kit for 892/00254 (can also be used with probe 892/00706)

892/00706

Test Probe

892/00347

Connector - Hose to gauge

Fig 33. 892/ 00253 Hydraulic Circuit Pressure Test Kit

1-24

9803-6590-3

1-24


Section 1 - General Information Service Tools Tool Detail Reference 892/00223

Hand Pump

892/00137

Micro-bore Hose 1/4 in BSP x 3 metres

892/00274

Adapter 1/4 in M BSP x 3/8 in M BSP Taper

892/00262

1/4 in M BSP x 1/4 in F BSP x Test Point

892/00706

Test Probe

892/00278

Gauge 0 - 40 bar (0 - 600 lbf/in2)

892/00279

Gauge 0 - 400 bar (0 - 6000 lbf/in2)

892/00280

Pressure Gauge 0-600 bar (0-9000 lbf/in2)

892/00279

Pressure Gauge 0-400 bar (0-6000 lbf/in2)

892/00346

Pressure Gauge 0-70 bar (0-1000 lbf/in2)

892/00347

Connector

892/00254

Hose

Fig 34. Hand Pump Equipment

Fig 35. 892/00881 Valve Spool Seal Fitting Tool

Fig 36. Hydraulic Circuit Test Gauges and Connections

1-25

9803-6590-3

1-25


Section 1 - General Information Service Tools Tool Detail Reference

JS07050

Fig 37. Ram Piston Nut Removal/Fitting Spanner

993/99512

Spanner 55 mm A/F

993/99513

Spanner 60 mm A/F

993/99514

Spanner 65 mm A/F

993/99515

Spanner 70 mm A/F

993/99516

Spanner 75 mm A/F

993/99517

Spanner 85 mm A/F

993/99518

Spanner 90 mm A/F

993/99519

Spanner 100 mm A/F

993/99520

Spanner 110 mm A/F

993/99521

Spanner 115 mm A/F

SSP0046

Spanner 80 mm A/F

SSP0047

Spanner 95 mm A/F

993/99525

Rig Assembly (not including spanners and ram)

993/99522

Anchor Side Plate (supplied loose unwelded)

993/99523

Anchor Cross unwelded)

993/99524

Ram Eye End Modification Plate Assembly

556/43400

Lift Ram

545/18000

Lynch Pin

811/50232

1.1/4in Pivot Pin

Member

(supplied

loose

Fig 38. Ram Piston Nut Removal/Fitting Rig

1-26

9803-6590-3

1-26


Section 1 - General Information Service Tools Tool Detail Reference

A408900

Fig 39. Socket Box Wrench Note: For disassembly and assembly of slew motor gearbox.

1-27

9803-6590-3

1-27


Section 1 - General Information Service Tools Tool Detail Reference

A408860

Fig 40. Nut Adapter Note: For disassembly and assembly of slew motor gearbox.

1-28

9803-6590-3

1-28


Section 1 - General Information Service Tools Tool Detail Reference

A408880-C1

Fig 41. Seal Ring Tool Note: For assembly and disassembly of slew motor gearbox seal.

A408890

Fig 42. Stopper

1-29

9803-6590-3

1-29


Section 1 - General Information Service Tools Tool Detail Reference Note: For assembly of slew motor gearbox.

A408870-C1

Fig 43. Bearing Rig Note: For removal of slew motor bearing.

1-30

9803-6590-3

1-30


Section 1 - General Information Service Tools Tool Detail Reference Inserting seal ring and correction jig WDB 2052

Bucket

120mm Cylinder inner diameter

WDB 2054

Boom

125mm Cylinder inner diameter

WDB 2164

Boom

130mm Cylinder inner diameter

WDB 2056

Arm

150mm Cylinder inner diameter

Jig for pulling out, press-fitting bushing WDB 2166

Bucket

80mm Piston Rod diameter

WDB 2167

Boom

85mm Piston Rod diameter

WDB 2170

Arm

100mm Piston Rod diameter

WDB 2168

Bucket

90mm Piston Rod diameter

WDB 2168

Boom

90mm Piston Rod diameter

WDB 2171

Arm

105mm Piston Rod diameter

WDB 2166-1

Bucket

80mm Piston Rod diameter

WDB 2167-1

Boom

85mm Piston Rod diameter

WDB 2170-1

Arm

100mm Piston Rod diameter

WDB 2168-1

Bucket

90mm Piston Rod diameter

WDB 2168-1

Boom

90mm Piston Rod diameter

WDB 2171-1

Arm

105mm Piston Rod diameter

WDB 2174

Bucket

80mm Piston Rod inner diameter

WDB 2175

Boom

85mm Piston Rod inner diameter

WDB 2178

Arm

100mm Piston Rod inner diameter

WDB 2176

Bucket

90mm Piston Rod inner diameter

WDB 2176

Boom

90mm Piston Rod inner diameter

WDB 2179

Arm

105mm Piston Rod inner diameter

Jig for press-fitting wiper ring

Jig for inserting cylinder head

Seal Ring and Connector Jig WDB 2052

Seal Ring insert and connection jig set

Note: The above Part no. is applicable to a tube diameter of 120mm

1-31

9803-6590-3

1-31


Section 1 - General Information Service Tools Tool Detail Reference Bush Removal Jig WDB 2166 WDB 2166-1

Bush removal jig Retainer

Note: The above Part no. is applicable to a rod diameter of 80mm

Bush Fitting Jig WDB 2166 WDB 2166-1

Bush press fitting jig Retainer

Note: The above Part no. is applicable to a rod diameter of 80mm

Wiper Ring Fitting Jig WDB 2166-1

Wiper Ring fitting

Note: The above Part no. is applicable to a rod diameter of 80mm

Wiper Ring Fitting Jig WDB 2174

Cylinder Head insertion guide jig

Note: The above Part no. is applicable to a rod diameter of 80mm

1-32

9803-6590-3

1-32


Section 1 - General Information Service Tools Tool Detail Reference

Section H - Steering

Fig 44. 892/00180 - Seal Fitting Tool Seal Fitting Tool for fitting 'O' ring and back-up ring to Danfoss Orbitrol Unit. 892/00181 - Replacement Plastic Boss

1-33

9803-6590-3

1-33


Section 1 - General Information Service Tools Tool Detail Reference

Page left intentionally blank

1-34

9803-6590-3

1-34


Section 1 - General Information Service Consumables Sealing and Retaining Compounds

Service Consumables Sealing and Retaining Compounds T11-001_3

Table 1. Type

Description

Part No.

Quantity

JCB Multi-Gasket

A medium strength sealant suitable for all sizes of 4102/1212 gasket flanges, and for hydraulic fittings of 25-65 mm diameter.

50 ml

JCB High Strength Threadlocker

A high strength locking fluid for use with threaded 4102/0551 components. Gasketing for all sizes of flange where the strength of the joint is important.

50 ml

JCB Retainer (High Strength)

For all retaining parts which are unlikely to be dismantled.

4101/0651

50 ml

JCB Threadlocker and Sealer

A medium strength locking fluid for sealing and retaining nuts, bolts, and screws up to 50 mm diameter, and for hydraulic fittings up to 25 mm diameter.

4101/0250

10 ml

4101/0251

50 ml

JCB Threadlocker and Sealer (High Strength)

A high strength locking fluid for sealing and retaining 4101/0550 nuts, bolts, and screws up to 50 mm diameter, and 4101/0552 for hydraulic fittings up to 25 mm diameter.

10 ml 200 ml

JCB Threadseal

A medium strength thread sealing compound.

4102/1951

50 ml

JCB Activator

A cleaning primer which speeds the curing rate of anaerobic products.

4104/0251

200 ml (Aerosol)

4104/0253

1 ltr (Bottle)

JCB Cleaner/Degreaser

For degreasing components prior to use of anaerobic adhesives and sealants.

4104/1557

400 ml (Aerosol)

Direct Glazing Kit

For one pane of glass; comprises of:

993/55700

– 1 x Ultra Fast Adhesive (310 ml) – 1 x Active Wipe 205 (30 ml) – 1 x Black Primer 206J (30 ml) – plus applicator nozzle etc. Ultra Fast Adhesive

For direct glazing.

4103/2109

310 ml

Active Wipe 205

For direct glazing.

4104/1203

250 ml

Black Primer 206J

For direct glazing.

4201/4906

30 ml

Clear Silicone Sealant

To seal butt jointed glass.

4102/0901

Plastic to Metal Bonder

To seal plastic to metal joints.

4103/0956

50 g

Black Polyurethane Sealant

To finish exposed edges of laminated glass.

4102/2309

310 ml

1-35

9803-6590-3

1-35


Section 1 - General Information Service Consumables Sealing and Retaining Compounds

Page left intentionally blank

1-36

9803-6590-3

1-36


Section 1 - General Information

Terms and Definitions Colour Coding Hydraulic Schematic Colour Codes T11-006

The following colour coding, used on illustrations to denote various conditions of oil pressure and flow, is standardised throughout JCB Service Publications.

Red

Full Pressure: Pressure generated from operation of a service. Depending on application this may be anything between neutral circuit pressure and MRV operating pressure.

Pink

Pressure: Pressure that is above neutral circuit pressure but lower than that denoted by Red.

Orange

Blue

Green

Light Green

Yellow

1-37

Servo: Oil pressure used in controlling a device (servo).

Neural: Neutral circuit pressure.

Exhaust

Cavitation: Oil subjected to a partial vacuum due to a drop in pressure (cavitation).

Lock Up: Oil trapped within a chamber or line, preventing movement of components (lock up).

9803-6590-3

1-37


Section 2 Care & Safety Section 1 - General Information Section 2 - Care & Safety Section 3 - Maintenance Section B - Body & Framework Section C - Electrics Section D - Controls Section E - Hydraulics Section F - Transmission Section K - Engine

Publication No.

9803/6590-3

World Class Customer Support Copyright © 2004 JCB SERVICE. All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any other means, electronic, mechanical, photocopying or otherwise, without prior permission from JCB SERVICE. Issued by JCB Technical Publications, JCB Aftermarket Training, Woodseat, Rocester, Staffordshire, ST14 5BW, England. Tel +44 1889 591300 Fax +44 1889 591400


Thank you very much for your reading. Please Click Here Then Get More Information.

Jcb js175w auto tier3 wheeled excavator service repair manual sn:1505100 onwards  
Jcb js175w auto tier3 wheeled excavator service repair manual sn:1505100 onwards  
Advertisement