Page 32

1400 YRM 413

1. 2. 3. 4. 5. 6. 7.

ADJUSTING NUT BEARING CUP BEARING CONE DIFFERENTIAL ASSEMBLY RING GEAR PINION SHAFT SHIM

Drive Axle, Speed Reducer, and Differential Repair

8. 9. 10. 11. 12. 13. 14.

SPACER (INNER) SPEED REDUCER GEAR SPACER (OUTER) CAPSCREW WASHER ACCESS PLATE THRUST SCREW

15. 16. 17. 18. 19.

SPECIAL WASHER SPECIAL LOCK NUT O-RING BEARING CUP SPEED REDUCER CASE

Figure 4. Speed Reducer Assembly

Differential 1. Remove ring gear from differential assembly. Remove twelve bolts and special hardened washers. Do not use a press or a hammer to remove the ring gear. Heat differential in hot water, 82 to 100 C (180 to 212 F), to loosen ring gear.

WARNING Hot parts. Wear protective clothing and gloves to prevent burns. 2. Disassemble the differential. Remove eight capscrews and washers and separate differential case. Remove cross, spider gears, and axle gears.

7

YALE B839 ERC40HG (ERC070-120HH) LIFT TRUCK Service Repair Manual  
YALE B839 ERC40HG (ERC070-120HH) LIFT TRUCK Service Repair Manual  
Advertisement