Overhead Guard Replacement 3. The rear legs of the overhead guard have two capscrews that are located under the hood inside the engine compartment, next to the radiator. Remove and install the capscrews. See Figure 20. 4. Remove the fender cover, dash, and kick panel to remove and install the three capscrews on the front legs of the overhead guard. See Hood, Seat, and Side Covers Replacement for the removal procedures.
100 YRM 1120
LED TAIL, BACKUP, AND BRAKE LIGHTS, REPLACE These light assemblies are nonrepairable and must be replaced as an assembly. See the section Electrical System 2200 YRM 1142 for the procedures to replace these lights.
5. When installing the overhead guard, tighten the capscrews for the overhead guard legs to 66 Nâ€¢m (49 lbf ft). See Figure 20.
1. 2. 3. 4.
CAPSCREWS - FRONT LEGS HANDLE CAPSCREWS - REAR LEGS FRAME
Figure 20. Overhead Guard 1. CLAMP 2. AIR INTAKE HOSE 3. BOLTS
4. ELBOW 5. RETAINER 6. GROMMET
Figure 19. Disconnect Air Intake Hose