Page 1

SINGLE DRUM ROLLER SERVICE MANUAL SM95005 March 2003

Models 1105, 1106, 1405, 1805


CALIFORNIA Proposition 65 Warning Diesel engine exhaust and some of its constituents are known to the State of California to cause cancer, birth defects, and other reproductive harm.


table of contents

SECTION ONE GENERAL INFORMATION MACHINE DESCRIPTION ................................................................................... 1 - 3 SERIAL NUMBERS .............................................................................................. 1 - 5 IDENTIFYING MACHINE COMPONENTS .......................................................... 1 - 6 FLUID SPECIFICATIONS .................................................................................... 1 - 7 MACHINE SPECIFICATIONS .............................................................................. 1 - 8 Model 1105 .................................................................................................... 1 - 9 Model 1106 ................................................................................................... 1 - 11 Model 1405 ................................................................................................... 1 - 13 Model 1805 ................................................................................................... 1 - 15 STANDARD TORQUE DATA ............................................................................. 1 - 16 DIESEL FUEL SPECIFICATION ........................................................................ 1 - 18 ENGINE OIL SPECIFICATION .......................................................................... 1 - 19 SAFETY, GENERAL .......................................................................................... 1 - 20 SPARK ARRESTER ........................................................................................... 1 - 20 SAFETY, PERSONAL ........................................................................................ 1 - 21 SAFETY, MACHINE OPERATION ..................................................................... 1 - 22 SAFETY, MAINTENANCE ................................................................................. 1 - 25 SAFETY, DECALS ............................................................................................. 1 - 27 HYDRAULIC HOOD OPERATION...................................................................... 1 - 30 HOOD INSTRUCTIONS ..................................................................................... 1 - 32

SECTION TWO ENGINE ENGINE DATA ...................................................................................................... 2 - 2 CUMMINS ENGINE WARRANTY ........................................................................ 2 - 3 ENGINE REMOVAL ............................................................................................. 2 - 4

1


table of contents

SECTION THREE ELECTRICAL GENERAL INFORMATION .................................................................................. 3 - 2 FUSE LOCATION ................................................................................................. 3 - 3 RELAY LOCATION .............................................................................................. 3 - 3 INSTRUMENT PANEL ......................................................................................... 3 - 4 UNDERSTANDING ELECTRICAL SCHEMATICS .............................................. 3 - 7 UNDERSTANDING RELAYS ............................................................................... 3 - 9 VIBROMAX RELAYS .................................................................................... 3 - 11 STARTER/CHARGING CIRCUIT (Cummins 6B5.9C) ....................................... 3 - 13 STARTER/CHARGING CIRCUIT (Cummins 6BT5.9C) ..................................... 3 - 15 UNDERSTANDING BATTERIES ....................................................................... 3 - 15 BATTERY DIAGNOSTICS ............................................................................ 3 - 16 UNDERSTANDING ALTERNATORS ................................................................. 3 - 17 CHARGING SYSTEM DIAGNOSTICS ......................................................... 3 - 18 VOLTAGE CHECKS AT ALTERNATOR ..................................................... 3 - 19 SYSTEM LEAKAGE ...................................................................................... 3 - 19 CIRCUIT WIRING TEST ............................................................................... 3 - 19 MEASURING ALTERNATOR OUTPUT ....................................................... 3 - 20 UNDERSTANDING STARTERS ........................................................................ 3 - 20 STARTER SOLENOID .................................................................................. 3 - 21 STARTER SYSTEM DIAGNOSTICS ............................................................ 3 - 21 SOLENOID CIRCUIT TEST .......................................................................... 3 - 21 STARTER CIRCUIT WIRING TEST ............................................................. 3 - 22 STARTER MOTOR TEST ............................................................................. 3 - 23 INSTRUMENTATION PANEL ............................................................................ 3 - 25 EMERGENCY STOP SWITCH/ BRAKE SWITCH ............................................. 3 - 27 HIGH SPEED CIRCUIT ...................................................................................... 3 - 29 VIBRATION CIRCUIT ......................................................................................... 3 - 31 LIGHTING CIRCUIT ........................................................................................... 3 - 33 WORK LIGHTS, ACCESSORY PLUG, HEATER AND WIPERS ...................... 3 - 35 CAB WIRING ...................................................................................................... 3 - 44 WIRE HARNESS 7241/80315 (0) ...................................................................... 3 - 45 WIRE CHART 7241/80315 (0) ........................................................................... 3 - 50 WIRE HARNESS 7241/80110(0)A ..................................................................... 3 - 54 WIRE CHART 7241/80110(0)A .......................................................................... 3 - 55 WIRE HARNESS 7241/80510(0)B ..................................................................... 3 - 56 WIRE CHART 7241/80510(0)B .......................................................................... 3 - 57

2


table of contents

SECTION FOUR HYDRAULIC PUMP SUCTION LINES ....................................................................................... 4 - 2 HYDRAULIC COOLING SYSTEM ....................................................................... 4 - 4 HYDRAULIC DRAIN LINES ................................................................................. 4 - 6 HYDRAULIC TEST SYSTEM ............................................................................... 4 - 8 HYDRAULIC TEST STATION .............................................................................. 4 - 9 CHARGE SYSTEM ............................................................................................ 4 - 11 PROPULSION SYSTEM .................................................................................... 4 - 13 MULTIFUNCTION VALVES ............................................................................... 4 - 17 PROPULSION SYSTEM DIAGNOSTICS .......................................................... 4 - 18 INTERNAL LEAKAGE ................................................................................... 4 - 18 PUMP SERVO CONTROL ................................................................................. 4 - 19 VIBRATION SYSTEM ........................................................................................ 4 - 21 VIBRATION FREQUENCY ................................................................................. 4 - 23 VIBRATION AMPLITUDE.................................................................................... 4 - 25 VIBRATORY SYSTEM DIAGNOSTICS ............................................................. 4 - 26 STEERING SYSTEM ......................................................................................... 4 - 27 PARKING BRAKE SYSTEM .............................................................................. 4 - 30 TOWING YOUR MACHINE ................................................................................ 4 - 31 TOWING PROCEDURE ..................................................................................... 4 - 32 PARKING BRAKE DIAGNOSTICS .................................................................... 4 - 32 DIFFERENTIAL LOCK SYSTEM ....................................................................... 4 - 35 HOOD LIFT SYSTEM.......................................................................................... 4 - 38 HYDRAULIC COMPONENTS ............................................................................. 4 - 40 HYDRAULIC SCHEMATIC ................................................................................. 4 - 41

SECTION FIVE POWER TRAIN GENERAL INFORMATION .................................................................................. 5 - 2 OPERATION ........................................................................................................ 5 - 3 SPETH AXLE ....................................................................................................... 5 - 4 REAR AXLE REMOVAL....................................................................................... 5 - 5 REAR AXLE INSTALLATION............................................................................... 5 - 6 AXLE TUBE DISASSEMBLY .............................................................................. 5 - 8 PLANETARY DISSASSEMBLY ......................................................................... 5 - 10 DIFFERENTIAL LOCK REMOVAL ..................................................................... 5 - 12 DIFFERENTIAL LOCK ASSEMBLY ................................................................... 5 - 13

3


table of contents AXLE TUBE AND PLANETARY ASSEMBLY .................................................... 5 - 14 INTERMEDIATE GEARBOX DISASSEMBLY .................................................... 5 - 18 INTERMEDIATE GEARBOX ASSEMBLY.......................................................... 5 - 20 DIFFERENTIAL DISASSEMBLY ........................................................................ 5 - 22 DIFFERENTIAL ASSEMBLY .............................................................................. 5 - 24 DRUM REMOVAL .............................................................................................. 5 - 29 DRUM INSTALLATION ...................................................................................... 5 - 29 DRUM DRIVE ..................................................................................................... 5 - 30 DRUM DRIVE BEARING REMOVAL ................................................................. 5 - 32 DRUM DRIVE BEARING INSTALLATION ......................................................... 5 - 34 DRUM DRIVE MOTOR REPAIRS ...................................................................... 5 - 36 DRUM DRIVE GEARBOX .................................................................................. 5 - 36 GFT 17 T2/312 2 GEARBOX ............................................................................. 5 - 38 GFT 36 T3 1042 GEARBOX .............................................................................. 5 - 40

SECTION SIX PARKING BRAKE SYSTEM DESCRIPTION ..................................................................................................... 6 - 2 BRAKE RELEASE AND TOWING ....................................................................... 6 - 4 TOWING PROCEDURE ....................................................................................... 6 - 5 AXLE BRAKE ....................................................................................................... 6 - 6 AXLE BRAKE PARTS LIST ............................................................................ 6 - 8

SECTION SEVEN VIBRATION SYSTEM VIBRATION SYSTEM .......................................................................................... 7 - 2 VIBRATION FREQUENCY ................................................................................... 7 - 3 VIBRATION AMPLITUDE ..................................................................................... 7 - 5 VIBRATORY SYSTEM DIAGNOSTICS ............................................................... 7 - 6 LIFTING DEVICE ................................................................................................. 7 - 7 DRUM REMOVAL ................................................................................................ 7 - 8 DRUM INSTALLATION ........................................................................................ 7 - 8 EXCITER BEARING REMOVAL .......................................................................... 7 - 9 EXCITER BEARING ASSEMBLY ...................................................................... 7 - 13 DRUM EXCITER SHAFT ................................................................................... 7 - 14

4


table of contents

SECTION EIGHT STEERING SYSTEM SPECIAL TOOLS ................................................................................................. 8 - 2 ARTICULATION JOINTS ..................................................................................... 8 - 3 JOINT DISASSEMBLY......................................................................................... 8 - 5 JOINT ASSEMBLY ............................................................................................... 8 - 9 STEERING CYLINDER ...................................................................................... 8 - 12

SECTION NINE CHASSIS DRUM FRAME ..................................................................................................... 9 - 2 REAR FRAME ...................................................................................................... 9 - 3 HOOD ................................................................................................................... 9 - 4 OPERATOR PLATFORM ..................................................................................... 9 - 5 ROLLOVER PROTECTION STRUCTURE .......................................................... 9 - 6

SECTION TEN ATTACHMENTS LEVELING BLADE ............................................................................................. 10 - 2 BLADE CONTROL ............................................................................................. 10 - 3 BLADE HYDRAULIC LINES ............................................................................... 10 - 4

5


SECTION ONE GENERAL INFORMATION

10/01/99

1-1


SM95005 - SECTION ONE

GENERAL INFORMATION

MACHINE DESCRIPTION In the fall of 1998 Vibromax introduced a new series of heavy single drum vibratory rollers. Included in the new series are the models 1105, 1106, 1405, and 1805. The new rollers all use the Cummins 5.9 liter 6 cylinder engine. Some engines are turbocharged and after cooled depending on the machine model. All of the new engines are tuned to meet the latest EPA emissions standards. A Sauer Sundstrand Series 90 variable displacement, axial piston hydrostatic pump, used for machine propulsion, is mounted to the flywheel end of the engine. It provides oil to a Rexroth 2 speed drum drive motor and a 2 speed axle drive motor in a parallel path. The Rexroth motor is mounted on the left side of the drum and drives through a planetary gearbox and is isolated from the drum by rubber buffers. The axle drive motor is attached directly to the intermediate gearbox on the rear axle. The vibration system uses a Sauer Sundstrand Series 90 hydrostatic pump similar to the propulsion pump and mounted directly behind the propulsion pump. The vibratory pump supplies oil to a Series 90 hydrostatic motor mounted at the right side of the drum. The new models operate at frequencies of 1740 or 2160 vibrations per minute on both the smooth drum and pad foot versions.

10/01/99

1-3


SM95005 - SECTION ONE

GENERAL INFORMATION

A steering pump, mounted to the rear of the vibration pump, provides the oil needed for steering. The steering pump is also a second charge pump in the propulsion/vibration circuit. The steering pump draws oil from the reservoir, passes it through the steering control valve, through the inline hydraulic filter, and into the charge circuit. The charge pump draws oil from the reservoir, joins the steering oil at the filter, passes it through the filter and into the charge circuit.

applied hydraulically released multiple disc brake at the intermediate gearbox. Pressure testing has been made easier by placing all the test ports at a centrally located test station under the engine hood on the right side of the machine. The electrical system consists of a 12 volt battery, starter, alternator system, optional lighting and standard instrumentation. The most notable changes from the earlier models are the mounting of the engine in a forward position and the tilting lift hood. These changes result in a substantial ambient noise level reduction.

These machines come standard with parking brakes at both the front drum and the rear axle. A spring applied-hydraulically released multi disc brake is part of the drum drive motor gearbox. The axle uses a spring

1-4

10/01/99


SM95005 - SECTION ONE

GENERAL INFORMATION

SERIAL NUMBERS 1

Model / Serial Number

2

Front Drum Drive Motor S/N

3

Steering Unit S/N

4

Axle S/N

5

Vibratory Motor S/N

6

Hydraulic Pumps S/N

7

Axle Drive Motor S/N

8

Engine S/N

10/01/99

1-5


SM95005 - SECTION ONE

GENERAL INFORMATION

IDENTIFYING MACHINE COMPONENTS 1 2 3 4 5 6 7 8 9 10 11 12

Articulation joint Smooth drum Lifting eye Operator’s stand Battery Hydraulic tank Engine Planetary gear Differential Drum drive motor Isolation buffer Scraper

13 14 15 16 17 18 19 20 21 22 23

1-6

Lifting and towing eyes Fuel tank Air filter system Engine radiator Roll over protective structure Vibration motor Steering cylinder Hydraulic pumps Intermediate gearbox Axle drive motor Engine exhaust

10/01/99


SM95005 - SECTION ONE

GENERAL INFORMATION

FLUID SPECIFICATIONS MACHINE PART

CAPACITY USA (metric)

SPECIFICATIONS

Fuel tank

105 gal (397 ltr)

see diesel fuel

Engine crankcase

15 qts(14.5 ltr)

engine oil API classification API-CD MIL-L-2104C multigrade engine oil (see oil chart) single grade engine oil (see oil chart)

Hydraulic system

29.1 gal (110 ltr)

Reservoir only

18.5 gal (70 ltr)

cold weather HLP 46 DIN 51524/2 hot weather HLP 68 DIN 51524/2 Mobil DTE 25,26 Shell Tellus OL 46,68 Amoco Rykon HD 46,68 Texaco Rando HD 46,68

Vibration system

12.7 qts. (12 ltr)

CLP 150 DIN 51517/3 Mobil Gear 629 Shell Omala 150 Texaco Meropa 150

Battery

as required

Distilled water

Grease

as required

KP3K DIN 51502 Mobil Oil - Mobilux 3 Shell Oil - Alvania 3 Texaco Oil - Starplex 3

Engine coolant

20 qts (19 ltr)

50% ethylene glycol and 50% water

Tire ballast

see chart

Calcium Chloride (77%CaCl2 )

Intermediate gear

1.1 qts (1 ltr)

SAE 90 API GL-5 gear lubricant Mobil HD 80 - 90

Axle gear

5.3 qts (5 ltr)

Planetary gear

2.2 qts (2 ltr)

1105 & 1106 1405 & 1805

Drum gearbox 1105 & 1106

1.4 qts (1.3 l)

1405 & 1805

3.7 qts (3.5 l)

10/01/99

CLP 220 LS 2 DIN 51517/3 Mobilgear 630 Mobilgear SHC 220 Texaco Syngear 220

1-7


SM95005 - SECTION ONE

GENERAL INFORMATION

MACHINE SPECIFICATIONS

MODEL 1105

in. a b c d1 d2 d3 d4 h k l o s w e1 e2

1-8

116.7 88.6 65.0 59.8 59.1 55.1 63 128.1 18.1 231.9 3 1 82.7

mm 2965 2250 1650 1520 1500 1400 1600 3255 460 5890 75 25 2100 31 degrees 30 degrees

10/01/99


SM95005 - SECTION ONE

GENERAL INFORMATION

Model 1105 ENGINE Make/Model/Type/Displacement - cu. in. (cc) HP, SAE net (kW) @2500 rpm Air Cleaner / Fuel filter Fuel Consumption- gal/hr (l/hr) Fuel capacity - gal (ltr)

Cummins 6BT5.9C, 6 cylinder turbo diesel (water cooled), 359 cu.in. (5880cc) 130 (97) Dual replaceable elements, Spin-on cartridge 4.39 (16.6) 105 (397) 1105D

1105PD

Operating weight CECE -lb (kg)

27720 (12573)

29375 (13325)

Weight, front-lb (kg)

13560 (6150)

15215 (6902)

Weight, rear axle - lb (kg)

14160 (6423)

14160 (6423)

Static applied linear drum load lb/in (kg/cm)

164 (29.3)

-----------

Articulation/oscillation-degrees

35/15

35/15

Turning radius-inside-ft (m)

11’10” (3.6)

11’10” (3.6)

Curb clearance - in. (mm)

19.5 (495)

Drum shell thickness-in. (mm)

1.0 (25)

1.0 (25)

Number of pad feet/height of foot - in. (mm)

132/ 3.9 (100)

Contact area of foot-sq. in. (cm)

64 sq.in.(413 sq. cm)

Tire size

23.1/20-26 8PR diamond tread

23.1/20- 26 8PR tractor tread

Travel speed - 1st range mph (km/hr)

0 - 4.8 (0 - 7.7)

0 - 4.8 (0 - 7.7)

0 - 7.9 (0 - 12.7)

0 - 7.9 (0 - 12.7)

- 2nd range mph (km/hr) Theoretical gradeability, forward - %

60

65

Brakes - front drum

disc

disc

- rear axle

disc - input shaft

disc - input shaft

1st Stage

2nd Stage

1st Stage

Max compaction depth - in. (cm)

39.4 (100)

------------

------------

------------

Frequency - vpm (Hz)

1740 (29)

2160 (36)

1740 (29)

2160 (36)

Amplitude - in. (mm)

.063 (1.6)

.024 (.6)

.063 (1.6)

.024 (.6)

Centrifugal force - lbf (kN)

50565 (225)

29440 (131)

50565 (225)

29440 (131)

Centrifugal force/drum width - lb/in. (N/cm)

611 (1071)

356 (623)

611 (1070)

356 (623)

Total applied force - lb (kN)

64125 (285)

43000 (191)

65780 (293)

44655 (198)

Total applied linear force - lb/in. (N/cm)

775 (1360)

520 (912)

--------------

10/01/99

1-9

2nd Stage


SM95005 - SECTION ONE

GENERAL INFORMATION

MODEL 1106

in. a b c d1 d2 d3 d4 h k l o s w e1 e2

1 - 10

116.7 88.6 65.0 59.8 59.1 55.1 63 128.1 18.1 231.9 3 1 82.7

mm 2965 2250 1650 1520 1500 1400 1600 3255 460 5890 75 25 2100 31 degrees 30 degrees

10/01/99


SM95005 - SECTION ONE

GENERAL INFORMATION

Model 1106 ENGINE Make/Model/Type/Displacement - cu. in. (cc) HP, SAE net (kW) @2300 rpm Air Cleaner / Fuel filter Fuel Consumption- gal/hr (l/hr) Fuel capacity - gal (ltr)

Cummins 6BTA5.9C, 6 cylinder turbo diesel (water cooled), 359 cu.in. (5880cc) 185 (138) Dual replaceable elements, Spin-on cartridge 4.8 (18.1) 105 (397) 1106D

1106PD

Operating weight CECE -lb (kg)

27720 (12573)

29375 (13325)

Weight, front-lb (kg)

13560 (6150)

15215 (6902)

Weight, rear axle - lb (kg)

14160 (6423)

14160 (6423)

Static applied linear drum load lb/in (kg/cm)

164 (29.3)

-----------

Articulation/oscillation-degrees

35/15

35/15

Turning radius-inside-ft (m)

11’10” (3.6)

11’10” (3.6)

Curb clearance - in. (mm)

19.5 (495)

Drum shell thickness-in. (mm)

1.0 (25)

1.0 (25)

Number of pad feet/height of foot - in. (mm)

132/ 3.9 (100)

Contact area of foot-sq. in. (cm)

64 sq.in.(413 sq. cm)

Tire size

23.1/20-26 8PR diamond tread

23.1/20- 26 8PR tractor tread

Travel speed - 1st range mph (km/hr)

0 - 4.8 (0 - 7.7)

0 - 4.8 (0 - 7.7)

0 - 7.9 (0 - 12.7)

0 - 7.9 (0 - 12.7)

- 2nd range mph (km/hr) Theoretical gradeability, forward - %

60

65

Brakes - front drum

disc

disc

- rear axle

disc - input shaft

disc - input shaft

1st Stage

2nd Stage

1st Stage

Max compaction depth - in. (cm)

39.4 (100)

------------

------------

------------

Frequency - vpm (Hz)

1740 (29)

2160 (36)

1740 (29)

2160 (36)

Amplitude - in. (mm)

.063 (1.6)

.024 (.6)

.063 (1.6)

.024 (.6)

Centrifugal force - lbf (kN)

50565 (225)

29440 (131)

50565 (225)

29440 (131)

Centrifugal force/drum width - lb/in. (N/cm)

611 (1071)

356 (623)

611 (1070)

356 (623)

Total applied force - lb (kN)

64125 (285)

43000 (191)

65780 (293)

44655 (198)

Total applied linear force - lb/in. (N/cm)

775 (1360)

520 (912)

--------------

10/01/99

1 - 11

2nd Stage


SM95005 - SECTION ONE

GENERAL INFORMATION

MODEL 1405

in. a b c d1 d2 d3 d4 h k l o s w e1 e2

1 - 12

116.7 88.6 65.0 59.8 59.1 55.1 63 128.2 18.1 231.9 3 1.4 82.7

mm 2965 2250 1650 1520 1500 1400 1600 3255 460 5890 75 35 2100 31 degrees 30 degrees

10/01/99


SM95005 - SECTION ONE

GENERAL INFORMATION

Model 1405 ENGINE Make/Model/Type/Displacement - cu. in. (cc) HP, SAE net (kW) @2300 rpm Air Cleaner / Fuel filter Fuel Consumption- gal/hr (l/hr) Fuel capacity - gal (ltr)

Cummins 6BTA5.9C, 6 cylinder turbo diesel (water cooled), 359 cu.in. (5880cc) 185 (138) Dual replaceable elements, Spin-on cartridge 4.4 (16.6) 105 (397) 1405D

1405PD

Operating weight CECE -lb (kg)

31306 (14200)

32187 (14600)

Weight, front-lb (kg)

16976 (7700)

17858 (8100)

Weight, rear - lb (kg)

14330 (6500)

14330 (6500)

Static applied linear drum load lb/in (kg/cm)

206 (36.7)

-----------

Articulation/oscillation-degrees

35/15

35/15

Turning radius-inside-ft (m)

11’10” (3.5)

11’10” (3.5)

Curb clearance in. - (mm)

19.5 (495)

Drum shell thickness-in. (mm)

1.4 (35)

1.4 (35)

Number of pad feet/height of foot - in. (mm)

132/ 4.0 (100)

Contact area of foot-sq. in. (cm)

64.0 sq.in.(413 sq. cm)

Tire size

23.1/20 - 26 8PR diamond tread

23.1/20 - 26 8PR tractor tread

Travel speed - 1st range mph (km/hr)

0 - 4.5 (0 -7.1)

0 - 4.5 (0 - 7.1)

0 - 7.3 (0 - 11.4)

0 - 7.3 (0 - 11.4)

- 2nd range mph (km/hr) Theoretical gradeability, forward - %

62

65

Brakes - front drum

disc

disc

- rear axle

disc - input shaft

disc - input shaft

1st Stage

2nd Stage

1st Stage

Max compaction depth - in. (cm)

47.2 (120)

------------

------------

-----------

Frequency - vpm (Hz)

1740 (29)

2100 (35)

1740 (29)

2100 (35)

Amplitude - in. (mm)

.059 (1.5)

.035 (.9)

.059 (1.5)

.035 (.9)

Centrifugal force - lbf (kN)

60003 (267)

38654 (172)

60003 (267)

38654 (172)

Centrifugal force/drum width - lb/in. (N/cm)

726 (1271)

467.5 (819)

---------------

---------------

Total applied force - lb (kN)

76979 (342)

55634 (247)

76979 (342)

55634 (247)

Total applied linear force - lb/in. (N/cm)

930 (1631)

673 (1180)

--------------

---------------

10/01/99

1 - 13

2nd Stage


SM95005 - SECTION ONE

GENERAL INFORMATION

MODEL 1805

in. a b c d1 d2 d3 d4 h k l o s w e1 e2

1 - 14

116.7 88.6 65.0 59.8 63 55.1 63 128.1 18.1 231.9 3 1.6 82.7

mm 2965 2250 1650 1520 1600 1400 1600 3255 460 5890 75 40 2100 31 degrees 30 degrees

10/01/99


SM95005 - SECTION ONE

GENERAL INFORMATION

Model 1805 ENGINE Make/Model/Type/Displacement - cu. in. (cc) HP, SAE net (kW) @2300 rpm Air Cleaner / Fuel filter Fuel Consumption- gal/hr (l/hr) Fuel capacity - gal (ltr)

Cummins 6BTA5.9C, 6 cylinder turbo diesel (water cooled), 359 cu.in. (5880cc) 185 (138) Dual replaceable elements, Spin-on cartridge 7.0 (26.5) 105 (397) 1805D

1805PD

Operating weight-lb (kg)

41006 (18600)

41006 (18600)

Weight, front-lb (kg)

24912 (11300)

24912 (11300)

Weight, rear axle - lb (kg)

16094 (7300)

16094 (7300)

Static applied linear drum load lb/in (kg/cm)

301 (53.8)

-----------

Drum wt, unsprung-lb (kg)

-------------

-----------

Articulation/oscillation-degrees

35/15

35/15

Turning radius-inside-ft (m)

11.8 (3.6)

11.8 (3.6)

Drum shell thickness-in. (mm)

1.6 (40)

1.6 (40)

Number of pad feet/height of foot - in. (mm)

132/ 4.0 (100)

Contact area of foot-sq. in. (cm)

64 sq.in.(413 sq. cm)

Tire size

23.1/20 - 26 8PR diamond tread

23.1/20 - 26 8PR tractor tread

Travel speed - 1st range mph (km/hr)

0 - 7.3 (0 - 4.7)

0 - 7.3 (0 - 4.7)

0 - 11.8 (0 - 7.6)

0 - 11.8 (0 - 7.6)

- 2nd range mph (km/hr) Theoretical gradeability, forward - %

24/45

24/45

Brakes - front drum

disc

disc

- rear axle

disc type - intermediate shaft

disc type - intermediate shaft

1st Stage

2nd Stage

1st Stage

Max compaction depth - in. (cm)

55 (140)

39 (100)

55 (140)

2nd Stage 39 (100)

Frequency - vpm (Hz)

1740 (29)

2100 (35)

1740 (29)

2100 (35)

Amplitude - in. (mm)

.079 (2)

.030 (.75)

.079 (2)

.030 (.75)

Centrifugal force - lbf (kN)

83151 (370)

46070 (205)

83151 (370)

46070 (205)

Centrifugal force/drum width - lb/in. (N/cm)

1006 (1762)

557 (976)

---------------

--------------

Total applied force - lb (kN)

108063 (480)

70982 (315)

108063 (480)

70982 (315)

Total applied linear force - lb/in. (N/cm)

1306 (2290)

858 (1505)

---------------

--------------

10/01/99

1 - 15


SM95005 - SECTION ONE

GENERAL INFORMATION

STANDARD TORQUE DATA Where no special torque data is specified, the following torque figures should be applied. Threads should be lubricated with engine oil or grease. STANDARD TORQUE SPECIFICATIONS +/- 10% GRADE 8.8

GRADE 10.9

GRADE 12.9

SIZE

ft-lbs

Nm

ft-lbs

Nm

ft-lbs

Nm

5mm

4

5.5

5.5

7.5

6.6

9

6mm

6.6

9

9.2

12.5

11

15

8mm

16.5

22.5

23

31.5

26.5

36

10mm

32

44

45

62

55

75

12mm

57

77.5

81

110

95

130

14mm

88

120

125

170

155

210

16mm

140

190

195

265

236

320

18mm

192

260

269

365

320

435

20mm

273

370

383

520

457

620

22mm

369

500

516

700

619

840

24mm

471

640

665

900

796

1080

27mm

702

950

996

1350

1195

1620

30mm

955

1300

1328

1800

1593

2160

NUTS FOR TUBES AND HOSES DIAMETER & PITCH

NEWTONS/METER

POUNDS/FOOT

16MM X 1.5

20

14.5

18MM X 1.5

35

26

20MMX1.45

45

33.2

24MM X 1.5

60

44

FITTINGS, CONNECTIONS AND PLUGS DIAMETER & PITCH

NEWTONS/METER

POUNDS/FOOT

10MM X 1

20

14.5

12MM X 1.5

35

26

14MM X 1.5

45

33.2

1 - 16

10/01/99


SM95005 - SECTION ONE

GENERAL INFORMATION

FITTINGS, CONNECTIONS AND PLUGS DIAMETER & PITCH

NEWTONS/METER

POUNDS/FOOT

16MM X 1.5

60

44

18MM X 1.5

70

51

22MM X 1.5

100

73

27MM X 2

200

147

33MM X 2

280

207

42MM X 2

380

281

FLANGES

10/01/99

DIAMETER & PITCH

NEWTONS/METER

POUNDS/FOOT

8MM X 1.5

28

21

10MM X 1.5

55

41

12MM X 1.75

90

67

14MM X 2

145

107

16MM X 2

230

170

1 - 17


SM95005 - SECTION ONE

GENERAL INFORMATION

DIESEL FUEL SPECIFICATION If fuel is stored for a long time, foreign particles or water can collect in the fuel storage tank. Many engine problems are caused by contaminated fuel. Store fuel outside and keep the fuel as cool as possible. Drain water from the fuel storage tank at regular intervals. NOTE: Paraffin crystals will start to form in fuel when the fuel temperature falls below the fuel’s cloud point. These paraffin crystals will clog the fuel filter and cause the engine to stop or lose power. At ambient temperatures above 32OF (0OC) use #2 diesel fuel. At temperature below 32OF (0OC) use #1 diesel fuel. Different brands of fuel can exhibit different properties. Make sure that the number 2 diesel fuel you use meets the following minimum requirements. MINIMUM REQUIREMENTS FOR NO.2 DIESEL FUEL: Maximum cloud point Maximum pour point

-10OF (-23OC) 42OF (6OC) below the lowest ambient air temperature at which the engine must start

Cetane number, min Max. sulphur content, by weight Max. water content & sediment by volume Max, ash content, by weight Max. carbon residue (10% point)

40 (45 to 55 in winter or at high altitude) 0.50% 0.05% 0.01% 0.20%

Distillation temperature @ 90% point Distillation temperature @ end point Minimum flash point

540 to 625OF (282-329OC) 675OF (357OC) 125OF (52OC)

Viscosity at 100OF (38OC) Centistokes Saybolt Universal Seconds (SUS) Copper strip test, 3 hours @ 212OF (100OC) Minimum API gravity

2.0 to 4.3 32 to 40 No 3 ASTM 30

1 - 18

10/01/99


SM95005 - SECTION ONE

GENERAL INFORMATION

ENGINE OIL SPECIFICATION Use multigrade or single grade engine oil with API engine oil service classification “CD”. NOTE: DO NOT use performance additives or other oil additives in your engine crankcase. See the chart below for recommended oil viscosity at the various ambient air temperature range

10/01/99

1 - 19


Thank you very much for your reading. Please Click Here Then Get More Information.

Jcb vibromax 1405 single drum roller service repair manual  
Jcb vibromax 1405 single drum roller service repair manual  
Advertisement