Section 3-1 - Routine Maintenance Routine Maintenance (P1) Service Schedules Operation Battery Terminals for Condition and Tightness
10
50
- Check
100(1)
500
1000 2000 8000
BODYWORK AND CAB Lift/Displacement/Tilt/Steer Ram Pivot Pins
- Grease
Extension Ram Piston Rod Pivot Pin
- Grease
Pivot Pins (Excluding 550-80 tilt link pivots)
- Grease
550-80 tilt link Pivot Pins
- Grease
Fire Extinguisher (if fitted)
- Check
Wing Mirrors Condition and Security
- Check
ROPS/FOPS Structure
- Check
Doors and Hinges
- Lubricate
Control Lever Linkages
- Lubricate
Windscreen Washer Fluid Level
- Check
Cab Heater Fresh Air Filter (if fitted)
- Change
Boom Wear Pad Runways
- Waxoyl
Inner Boom Hoses
- Grease
Boom Wear Pad Clearance (15)
- Check/Adjust
Boom Wear Pad Condition and Security (Replace if required)(15)
- Check/Adjust
ATTACHMENTS Carriage Lock Pins
- Grease
Hydraulic Tow Hitch Inner Leg (if fitted)
- Waxoyl
Hydraulic Tow Hitch Pivot Pin (if fitted)
- Grease
Hydraulic Tow Hitch Release Cable/ Return Spring/Retaining Latch (if fitted)
- Check
REGISTRATION/CERTIFICATION SWL Stickers (UK) and Flip Chart
- Renew as Required
(1) First 100 Hours Service only, to be completed by your JCB Distributor. (2) If operating under arduous conditions, do an engine oil flush (use the normal recommended engine oil) every 250 hours. Change the engine oil and filter every 250 hours. (3) The oil service interval will be affected if there is a high sulphur content in the fuel. Refer to Fuel System for more information. (4) When the engine is operated with 20% biodiesel change the engine oil and filter every 250 hours. Refer to Fuel System for more information. (5) More frequently if operating in dusty working environments.
3-1-12
9813/0900-2 (3-41-01)
3-1-12