Radiator Replacement 9. Uncap and connect upper radiator hose and tighten clamp. 10. Lift trucks equipped with Cummins QSB 3.3L or Kubota 3.8L diesel engine, uncap the charge air cooler hoses and connect the hoses to the charge air cooler. See Figure 13 or Figure 15. 11. Install fan. See Fan Installation procedures.
700 YRM 1123 See Figure 27 for lift truck models below equipped with GM 5.7L LPG engine • GLP80VX, GLP80VX9, GLP90VX (GLP170VX, GLP175VX36, GLP190VX) (A909, B909) See Figure 28 for lift truck models equipped with Kubota 3.8L Diesel engine • GDP80VX, GDP80VX9, GDP90VX (GDP170VX, GDP175VX36, GDP190VX) (B909)
12. Align shroud to radiator and install capscrews, washers and clip nuts.
17. Install hood assembly. For hood install procedures, see section
See Figure 25 for lift truck models • GLP/GDP60VX, GLP/GDP70VX (GP/GLP/ GDP135VX, GP/GLP/GDP155VX) (C878, D878, E878)
Frame 100 YRM 1321 for lift truck models • GLP/GDP80VX, GLP/GDP80VX9, GLP/GDP90VX (GLP/GDP170VX, GLP/GDP175VX36,GLP/GDP190VX) (A909) • GLP/GDP60VX, GLP/GDP70VX (GP/GLP/ GDP135VX, GP/GLP/GDP155VX) (C879, D879)
See Figure 13 for lift truck models below equipped with Cummins QSB 3.3L diesel engine • GDP80VX, GDP80VX9, GDP90VX (GDP170VX, GDP175VX36, GDP190VX) (A909, B909) See Figure 14 for lift truck models below equipped with GM 5.7L LPG engine • GLP80VX, GLP80VX9, GLP90VX (GLP170VX, GLP175VX36, GLP190VX) (A909, B909) See Figure 15 for lift truck models equipped with Kubota 3.8L Diesel engine • GDP80VX, GDP80VX9, GDP90VX (GDP170VX, GDP175VX36, GDP190VX) (B909) 13. If necessary, connect electrical connector onto the coolant level sensor. 14. Lift truck equipped GM 4.3L (Gas/LPG) engine, install air intake hose to air filter and tighten clamp. 15. Lift trucks equipped with Cummins 4.5L or QSB 3.3L diesel engine, install silencer and connect hose from air filter side and tighten clamp. See Figure 25. 16. Lift trucks equipped with Cummins QSB 3.3L, Kubota 3.8L diesel engine or GM 5.7L LPG engine, connect dirty air hose to hood support and install and tighten clamp. See Figure 26 for lift truck models below equipped with Cummins QSB 3.3L diesel engine • GDP80VX, GDP80VX9, GDP90VX (GDP170VX, GDP175VX36, GDP190VX) (A909, B909)
Frame 100 YRM 1581 for lift truck models • GLP/GDP60VX, GLP/GDP70VX (GP/GLP/ GDP135VX, GP/GLP/GDP155VX) (E878) • GLP/GDP80VX, GLP/GDP80VX9, GLP/GDP90VX (GLP/GDP170VX, GLP/GDP175VX36, GLP/GDP190VX) (B909) 18. Lift truck equipped GM 4.3L (Gas/LPG) engine, open hood assembly and connect intake hose to hood support and tighten clamp. See Figure 25. 19. Lift trucks equipped with Kubota 3.8L, Cummins 4.5L, or QSB 3.3L diesel engine, open hood assembly and connect hose to hood support and tighten clamp. See Figure 25 for lift truck models • GLP/GDP60VX, GLP/GDP70VX (GP/GLP/ GDP135VX, GP/GLP/GDP155VX) (C878, D878, E878) See Figure 26 for lift truck models below equipped with Cummins QSB 3.3L diesel engine • GDP80VX, GDP80VX9, GDP90VX (GDP170VX, GDP175VX36, GDP190VX) (A909, B909) See Figure 28 for lift truck models equipped with Kubota 3.8L Diesel engine • GDP80VX, GDP80VX9, GDP90VX (GDP170VX, GDP175VX36, GDP190VX) (B909) 20. Connect positive battery cable. 21. Connect negative battery cable.
38