0100 YRM 1290
Cab Replacement
Legend for Figure 30 NOTE: RIGHT SIDE SHOWN. WIPER COVER AND ASSEMBLY FOR EARLY MODEL GLP/GDP60VX, GLP/GDP70VX (GP/GLP/GDP135VX, GP/GLP/ GDP155VX) (C878, D878) LIFT TRUCKS SHOWN. THE FRONT AND REAR CAB MOUNTING IS SAME FOR LATER MODEL GLP/GDP60VX, GLP/ GDP70VX (GP/GLP/GDP135VX, GP/GLP/ GDP155VX) (C878, D878, E878) LIFT TRUCKS AND ON GLP/GDP80VX, GLP/GDP80VX9, GLP/ GDP90VX (GLP/GDP170VX, GLP/GDP175VX36, GLP/GDP190VX) (A909, B909) LIFT TRUCK MODELS. A. REAR VIEW 1. 2. 3. 4. 5. 6. 7.
B. FRONT VIEW
INSTALL, FOR LIFT TRUCK MODELS GLP/GDP60VX, GLP/GDP70VX (GP/GLP/ GDP135VX, GP/GLP/GDP155VX) (C878, D878, E878), GLP/GDP80VX, GLP/ GDP80VX9, GLP/GDP90VX (GLP/ GDP170VX, GLP/GDP175VX36, GLP/ GDP190VX) (A909, B909) 1. Connect a lifting device to a spreader bar or lift strap, that is through door openings at top of operator's cab (under overhead guard structure). Place material that will be a cushion at top of door opening to prevent damage. Operate lifting device just enough to correctly position spreader bar or lifting strap on operator's cab. See Figure 31.
FLANGE BOLTS REAR OPERATOR CAB LEG REAR LIGHT HARNESS WASHER PUMP HARNESS CONNECTOR WASHER FLUID RESERVOIR MODULE COWL PANEL
WARNING Make sure that the lifting device has a minimum capacity to lift 500 kg (1100 lb). 26. Connect a lifting device to a spreader bar or lift strap, that is through door openings at top of operator's cab (under overhead guard structure). Place material that will be a cushion at top of door opening to prevent damage. Operate lifting device just enough to correctly position spreader bar or lifting strap on operator's cab. See Figure 31.
CAUTION Lift the operator cab carefully. Check that all electrical wires and attachments are disconnected correctly and are not damaged. 27. Carefully lift operator cab up and away from lift truck. Set operator cab in a storage area and place blocks under operator cab to make it stable and prevent damage to wire harness and parts still attached.
Figure 31. Lift Strap Connection
29