0100 YRM 1290
Cab Replacement
7. Remove two screws holding right side rear cover to rear overhead guard leg. See Figure 25.
NOTE: RIGHT SIDE VIEW SHOWN. 1. 2. 3. 4. 5. 6.
RIGHT SIDE REAR COVER RIGHT SIDE FRONT COVER SCREWS REAR FLOOR PLATE FRONT FLOOR PLATE CLIP NUTS Figure 25. Side Cover Removal
8. Remove two screws holding right side front cover to frame. Remove right side rear cover. 9. Remove two screws securing right side front cover to front overhead guard leg. Remove right side front cover. 10. Repeat Step 7 through Step 9 to remove left side covers. NOTE: Perform Step 11 for early model GLP/ GDP60VX, GLP/GDP70VX (GP/GLP/GDP135VX, GP/GLP/GDP155VX) (C878, D878). 11. Remove two lock nuts from front wiper motor cover. Remove front wiper motor cover. See Figure 26.
1. 2. 3. 4. 5. 6. 7. 8.
CAPSCREWS FRONT WIPER MOTOR COVER DASH ASSEMBLY KICK PANEL COWL PANEL FRONT OPERATORS CAB LEGS LOCK NUT FLANGE BOLT Figure 26. Dash Removal, Early Model GLP/ GDP60VX, GLP/GDP70VX (GP/GLP/GDP135VX, GP/GLP/GDP155VX) (C878, D878) Lift Trucks
NOTE: Perform Step 12 on later model lift trucks •
GLP/GDP60VX, GLP/GDP70VX (GP/GLP/ GDP135VX, GP/GLP/GDP155VX) (C878, D878, E878)
•
GLP/GDP80VX, GLP/GDP80VX9, GLP/ GDP90VX (GLP/GDP170VX, GLP/ GDP175VX36, GLP/GDP190VX) (A909, B909)
12. Remove three lock nuts from front wiper motor cover. Remove front wiper motor cover. See Figure 27.
25