3
Marine Boat Engine 2011 ▶ 8-cylinder diesel engine (4.2 l engine, common rail) 05.2011
Output on ScanDi tool / VAS 5052
Possible cause of fault
Possible effects
Fault remedy
xxxxx
◆ Max./Min. recovery occurred
◆ Engine stalls
– Erase fault and try to start again
B0273
ECU
– Replace control unit if fault appears again 16496
P0112
◆ -G42- defective
Intake air temperature sender ◆ Wiring defective -G42- signal too low
16497
P0113
◆ -G42- defective
Intake air temperature sender ◆ Wiring defective -G42- signal too high
16501
P0117
◆ -G62- defective
Coolant temperature sender -G62- signal too low
◆ Wiring defective
16502
P0118
◆ -G62- defective
Coolant temperature sender ◆ Wiring defective -G62- signal too high
16565
P0181
◆ -G81- defective
Fuel temperature sender -G81- implausible signal
◆ Wiring defective
16566
◆ -G81- defective
P0182
Fuel temperature sender -G81- short to earth
◆ Wiring defective
16567
P0183
◆ -G81- defective
Fuel temperature sender -G81- open circuit / short to positive
◆ Wiring defective
12
Repair Group 01 - Self-diagnosis
◆ Replacement value 50 °C
– Check wiring and -G42- ⇒ Page 302
◆ Possible formation of smoke
– Check central earth point / earth connections
◆ Replacement value 50 °C
– Check wiring and -G42- ⇒ Page 302
◆ Possible formation of smoke
– Check central earth point / earth connections
◆ Replacement value 90 °C
– Check wiring and -G62- ⇒ Page 297
◆ Poor cold starting ◆ „Knocking“
– Check central earth point / earth connections
◆ Replacement value 90 °C
– Check wiring and -G62- ⇒ Page 297
◆ Poor cold starting ◆ „Knocking“
– Check central earth point / earth connections
◆ Replacement value 40 °C
– Check wiring and -G81- ⇒ Page 300
◆ Increased exhaust emissions
– Check central earth point / earth connections
◆ Replacement value 40 °C
– Check wiring and -G81- ⇒ Page 300
◆ Increased exhaust emissions
– Check central earth point / earth connections
◆ Replacement value 40 °C
– Check wiring and -G81- ⇒ Page 300
◆ Increased exhaust emissions
– Check central earth point / earth connections