F106.6 / F106.6A
POWERSHIFT TRANSMISSION Read and observe: "Inspection and servicing - General instructions". As the torque converter of the powershift transmission may be emptied into the transmission while the engine is stationary, the oil level must be checked while the engine is running. It is vital therefore to respect the safety instructions set out in the following sections.
0 - 29
HYDRAULIC SYSTEM RISK OF INJURY from hydraulic oil under high pressure. from hydraulic fluid or hot parts of the engine. Before working on the hydraulic system, make sure the system has been depressurized and that any residual pressure has also been released (see the section "Hydraulic system"). Shut off the engine and let the machine cool down. Secure the machine as described in the chapter "Securing the machine". Avoid skin contact with hydraulic oils. Skin contact with hydraulic oils is a health hazard. Wear gloves and firm working clothing. Read and observe: "Inspection and servicing - General instructions".
Carefully read personal and machine SAFETY INSTRUCTIONS (at the beginning of this manual)