8200 SERIES TRACTORS
Splitting - Gearbox / Intermediate Housing
2C01.13
Final operations Special point 85. During positioning of the cab, check the behaviour of the gear control lifting arm. Reinstall and adjust the gear lifting arm (see section 5C01 - 5C02 or 5C03 depending on version). 86. Reconnect and adjust the control cables of the mechanical reverse shuttle (see section 5C01). 87. Reinstall or reconnect the following items on the selector cover: - creeper control, if fitted (see section 5K01), - return hose from power-assisted braking and return hose from Orbitrol steering unit, - return hose from brake master-cylinder tank, - harness of temperature sensor and Hare/Tortoise solenoid valve. 88. Perform the following operations: - reconnect the transmission lube pipe, - reinstall the 17-bar pipe on the selector cover, and the 17-bar hose feeding to the power-assisted braking, - reinstall lube pipe (17) (Fig. 8), - clean the mating surfaces of the clutch valve or of the clutch control unit (depending on version) and of the housing. - coat the mating face of the housing with sealing product Loctite 510 or equivalent, - reinstall the clutch control valve (version with mechanical reverse shuttle) or the clutch control unit (version with power shuttle). Torque the screws to 25 - 35 Nm. Reconnect the pipes and the solenoid valve connectors on the Dynashift valve or on the clutch control unit (depending on version). - Fit the solenoid-valve connectors onto the of Dynashift valve. - Reconnect the cooler hoses, observing the markings made during disassembly. 89. Reinstall the side tank. Reinstall and adjust the chassis reinforcements (see section 2F01).
Issue 1 Issue
May 2002 2001 May