Figure 10-200-3
STOPPING THE ENGINE AND LEAVING THE LOADER Procedure Figure 10-200-1
1
2 B-15553B
B-15552B
Engage the parking brake. P-68655
Turn the key switch (Item 1) to the STOP position (Key Switch Panel) or press the STOP Button (Item 2) [Figure 10-200-3] (Keyless Panel).
P-68656
Stop the Bobcat Loader on level ground. Lower the lift arms fully and put the attachment flat on the ground [Figure 10-200-1]. Exit the loader [Figure 10-200-1].
Lift the seat bar and make sure the lift and tilt functions are deactivated. Unbuckle the seat belt. Remove the key from the switch (Key Switch) to prevent operation of the loader by unauthorized personnel.
Figure 10-200-2
WARNING
P-68134
Pull the engine speed control fully backward [Figure 10200-2] to decrease the engine speed.
Before you leave the operator’s seat: • Lower the lift arms, put the attachment flat on the ground. • Stop the engine. • Engage the parking brake. • Raise seat bar. • (Foot Pedal Controls) Move pedals until both lock. • (Advanced Control System-ACS) Move the hydraulic controls to the NEUTRAL POSITION to make sure that both lift and tilt functions are deactivated. The seat bar system must deactivate the lift and tilt control functions when the seat bar is up. Service the system if hand controls do not deactivate. • (Selectable Joystick Controls-SJC) Move the joysticks to the NEUTRAL POSITION to make sure that travel and hydraulic functions are deactivated. The seat bar system must deactivate these functions when the seat bar is up. Service the system if controls do not deactivate. W-2463-0603
10-200-1
S220 Service Manual