NEUTRAL START INTERLOCKS
6. The starter should not engage.
Inspecting Traction Drive Interlock
7. Release the Continuous Flow Shutoff Lever (Item 3) [Figure 10-180-1]. The lever must return to the UP position.
Figure 10-180-1
Inspecting Auxiliary Hydraulic Interlock 2
1. Stop the engine and engage the Parking Brake (Item 1) [Figure 10-180-1].
4
2. Make sure the area around the machine is clear of bystanders.
1
5
3. Set the engine speed lever (Item 2) [Figure 10-1801] to slow.
P-81916A
4. Push the Auxiliary Hydraulic Control Lever forward (Item 4) [Figure 10-180-1] and turn the key switch to START position.
3
1. Stop the engine and engage the Parking Brake (Item 1) [Figure 10-180-1]. 2. Make sure the area around the machine is clear of bystanders. 3. Set the engine speed to slow (Item 2) [Figure 10-1801]. 4. Partially move the Drive / Steering Control (Item 3) [Figure 10-180-1] in the forward direction and turn the key switch to START position.
5. The starter should not engage. 6. Repeat procedure with the Auxiliary Hydraulic Control Lever pulled backward. NOTE: If any of the controls in these previous inspection procedures do not function properly, contact your dealer for service. DO NOT modify the system.
WARNING
5. The starter should not engage. 6. Repeat procedure with the Drive / Steering Control being moved in the backward direction. 7. Repeat procedure with the Drive / Steering Control being moved in the right direction.
The Reverse Stop Panel, Neutral Start Interlocks, and Lift/Tilt Lockouts must function properly. •
8. Repeat procedure with the Drive / Steering Control being moved in the left direction. Inspecting The Continuous Flow Shutoff Lever 1. Stop the engine and engage the Parking Brake (Item 1) [Figure 10-180-1].
The Reverse Stop Panel must stop mini loader from moving backward when panel is pushed forward. • The Lift/Tilt Lockouts must deactivate the lift and tilt functions when engine is off. If any of these do not function properly, contact your dealer for service. DO NOT modify system.
2. Make sure the area around the machine is clear of bystanders.
W-2559-0207
3. Set the engine speed to slow (Item 2) [Figure 10-1801]. 4. Depress the Continuous Flow Shutoff Lever (Item 3) [Figure 10-180-1] so the lever is in the DOWN position. 5. Turn the key switch to START position.
10-180-1
MT52, MT55 Service Manual