INTRODUCTION
This illustration shows the D32E-1 GENERAL Instructions contained in this shop manual are for information and guidance of the service personal who are responsible for the overhaul and repair of this machine. In this shop manual, the use of the terms left, right, front and rear must be understood to avoid confusion when following the instructions. These terms indicate the sides of the machine when facing forward in the operators seat. Due to a continuous program of research and development, some procedures, specifications and parts may be altered in a constant effort to improve this machine. Some illustrations are of a general application and may not show the component parts accurately in all details. PIN AND SERIAL NUMBERS The PIN (product identification number) is stamped on a plate attached to the right hand side of the dash support on the engine side. It is also stamped on the right rear face of the rear main frame in the upper corner. The engine serial number is on a plate on the left side of the engine front gear cover above the fuel pump.
1 - 10
SERVICE INFORMATION