Page 60

Door Assemblies

0100 YRM 1290

Windows

Inspect

For procedures to remove and install door windows, see section Window Replacement.

Inspect seals around window, door, and door lock assembly and replace if damaged. Check door lock and latch assembly. Make sure it opens, shuts, and locks door securely and there is no rust, grease, oil, or dirt on door lock and latch assembly parts. Inspect window for cracks or chips. Replace window if damaged.

Clean

WARNING Compressed air can move particles so that they cause injury to the user or to other personnel. Make sure that the path of the compressed air is away from all personnel. Wear protective goggles or a face shield to prevent injury to the eyes. Check door assembly parts for oil, grease, dirt, and other debris. Clean door assembly and parts with a clean cloth, soap, and water. Compressed air can be used for drying door assembly and parts.

Assemble Windows For procedures to remove and install door windows, see section Window Replacement.

Door Lock Assembly 1. Install grip and seal to outside door handle assembly. See Figure 52.

NOTE: RIGHT SIDE DOOR SHOWN. 1. LATCH STRIKER ASSEMBLY 2. SEAL

3. OUTSIDE DOOR HANDLE 4. GRIP Figure 52. Outside Handle Removal

54

YALE H813 GLP50VX LIFT TRUCK (EUROPE) Service Repair Manual  
YALE H813 GLP50VX LIFT TRUCK (EUROPE) Service Repair Manual  
Advertisement