Page 57

0100 YRM 1290

Door Assemblies

2. Install handle to latch assembly with two capscrews. Tighten capscrews to 19.2 N•m (170 lbf in). Secure lock cover to door lock assembly with capscrew.

1. Open right side door and remove hair pin from rod pin. See Figure 49.

3. Secure handle to rear of door cover with screw. Tighten screw to 5.0 N•m (44 lbf in). Push cover into place over screw.

3. Remove right side door from cab frame by lifting door up and over hinge pin. See Figure 39.

Install

2. Remove rod pin and spacers from link.

4. To remove left door, repeat Step 1 through Step 3.

1. Install left side door onto cab by lifting door over top and bottom hinge pins. See Figure 39. 2. Connect gas spring to mounting bracket on operator cab frame. See Figure 9.

RIGHT AND LEFT SIDE DOOR ASSEMBLIES, LIFT TRUCK MODELS GLP/GDP60VX, GLP/GDP70VX (GP/GLP/ GDP135VX, GP/GLP/GDP155VX) (C878, D878, E878), GLP/GDP80VX, GLP/ GDP80VX9, GLP/GDP90VX (GLP/ GDP170VX, GLP/GDP175VX36, GLP/ GDP190VX) (A909, B909) NOTE: The right and left doors are identical and are repaired and serviced in same manner on lift truck models •

GLP/GDP60VX, GLP/GDP70VX (GP/GLP/ GDP135VX, GP/GLP/GDP155VX) (C878, D878, E878)

GLP/GDP80VX, GLP/GDP80VX9, GLP/ GDP90VX (GLP/GDP170VX, GLP/ GDP175VX36, GLP/GDP190VX) (A909, B909)

Remove

NOTE: RIGHT SIDE DOOR SHOWN 1. ROD PIN 2. SPACERS

3. HAIR PIN 4. DOOR ASSEMBLY

Figure 49. Door Link Removal

NOTE: Removing door assemblies from operators cab requires two people.

51

YALE H813 GLP50VX LIFT TRUCK (EUROPE) Service Repair Manual  
YALE H813 GLP50VX LIFT TRUCK (EUROPE) Service Repair Manual  
Advertisement