Page 54

0100 YRM 1243 24. For lift trucks equipped with a Cummins QSB 3.3L diesel engine, remove oil cooler to reach access port. See Yale Axcess Online. 25. Lift trucks equipped with Cummins QSB 3.3L diesel engine, remove bolts and cover to get to access port. See Figure 37. 26. Lift trucks equipped with Kubota diesel engine, remove bolts and cover to reach access port. See Figure 38.

Engine Replacement See Figure 38 for lift trucks equipped with a Kubota diesel engine. 28. Connect a lifting device to engine. Put a block under transmission housing to support transmission. 29. Remove capscrews from transmission bell housing.

WARNING

27. Use access port on engine to remove bolts that attaching flywheel to torque converter.

The engine is heavy. Make sure that any lifting device has enough capacity to lift the engine. The engine can weigh approximately 363 kg (800 lb).

See Figure 35 for lift trucks equipped with a GM 4.3L gas or LPG engine.

30. Remove flange nuts, washers, bolts, and isolators from engine mounts. See Figure 23 or Figure 39.

See Figure 36 for lift trucks equipped with a Cummins 4.5L diesel engine. See Figure 37 for lift trucks equipped with a Cummins QSB 3.3L diesel engine.

1. ACCESS PORT 2. ENGINE MOUNTING BRACKET AND HARDWARE 1. ACCESS PORT 2. ENGINE MOUNTING BRACKET AND HARDWARE

Figure 36. Cummins 4.5L Engine Access Port

Figure 35. GM 4.3L Engine Removal Access Port

53

YALE F813 GP-GLP-GDP 80VX LIFT TRUCK Service Repair Manual  
YALE F813 GP-GLP-GDP 80VX LIFT TRUCK Service Repair Manual  
Advertisement