Section 3
Routine Maintenance
Section 3
10 - 3
10 - 3
Engine (cont'd) * Changing the Oil and Filter - Peugeot engine (cont'd) 5
After emptying the sump, unscrew drain coupling E and replace the dust cap D.
Note: The valve closes automatically as the coupling is removed. The dust cap need only be hand tight. 6
Unscrew the filter canister G, using a chain wrench if necessary. Remember that it will contain some oil.
7
Clean filter head H.
8
Add clean engine oil to the new filter canister. Allow time for the oil to pass through the filter element.
9
Smear the seal J on the new filter canister with clean engine oil.
J H G
10 Screw in the new filter canister - hand tight only. 11 Fill the engine with the recommended oil, to the MAX mark on the dipstick A, through the filler point B. Wipe off any spilt oil, refit the filler cap and make sure it is secure.
174310
12 Make sure the engine will not start by removing the engine shut-off solenoid (ESOS) fuse. Turn the engine using the starter key until the oil pressure warning light is extinguished. 13 Refit the engine shut-off solenoid fuse and start the engine. Check for leaks. When the engine has cooled, check the oil level and, if necessary, top up with clean engine oil. 14 Close and secure the engine compartment rear door and hinged top cover.
9803/8500
Issue 3*