Maintenance
9. Using a 6 mm Allen wrench, turn the filter assembly nut clockwise to tighten. Torque the nut.
b
a
13173
a - Assembly nut
b - Fluid filter assembly
Description
Nm
lb. in.
Filter assembly nut
5‑8
48‑72
lb. ft.
10. Fill the transmission to the proper level with the specified fluid. See Filling.
Technodrive Transmission Fluid Checking 1. Remove the dipstick. IMPORTANT: When checking the fluid level, rest the dipstick on top of the threaded housing hole. Do not screw the dipstick onto the threaded housing hole. 2. Check the fluid level as indicated on the dipstick with the dipstick resting on the top of the threaded hole.
NOTE: The fluid level may be somewhat over the maximum mark, as some of the fluid from the transmission fluid cooler and hoses can drain back into the transmission.
CMD-4082040 / 90-866941 NOVEMBER 2007
Page 1B-29