HYDRAULIC / HYDROSTATIC SYSTEM
Hydraulic / Hydrostatic Fluid Chart
Checking And Adding Fluid
Use only recommended fluid in the hydraulic system. (See Hydraulic System on Page SPEC-10-3.) Stop the loader on a level surface. Lower the lift arms and tilt the Bob-Tach fully back. Stop the engine. Figure 10-120-1
Use the correct hydraulic / hydrostatic fluid shown in chart [Figure 10-120-2].
Remove the dipstick (Item 1) [Figure 10-120-1]. Remove the fill cap (Item 2) [Figure 10-120-1]. Add fluid as needed to bring the level to the top mark on the dipstick. Do not overfill. Remove the screen (Item 3) [Figure 10-120-1] and clean with solvent as needed. Install the fill cap (Item 2) [Figure 10-120-1].
T140 Service Manual