Issuu on Google+

IPS e.max System

General features

IPS e.max Press

IPS e.max ZirPress IPS e.max ZirCAD

IPS e.max CAD

IPS e.max Ceram

Cementation


IPS e.max CAD

IPS e.max System

General features

IPS e.max Press

IPS e.max ZirPress IPS e.max ZirCAD

IPS e.max CAD

IPS e.max Ceram

Cementation


Preparation guidelines and minimum thicknesses

Veneer preparation (dimensions in mm)

IPS e.max CAD

IPS e.max System

General features

IPS e.max Press

IPS e.max ZirPress IPS e.max ZirCAD

IPS e.max CAD

IPS e.max Ceram

Cementation


Preparation guidelines and minimum thicknesses

Partial crown preparation (dimensions in mm)

IPS e.max CAD

IPS e.max System

General features

IPS e.max Press

IPS e.max ZirPress IPS e.max ZirCAD

IPS e.max CAD

IPS e.max Ceram

Cementation


Preparation guidelines and minimum thicknesses

Crown preparation (dimensions in mm)

IPS e.max System

General features

IPS e.max Press

IPS e.max ZirPress IPS e.max ZirCAD

IPS e.max CAD

IPS e.max Ceram

Cementation


IPS e.max CAD – Staining technique

Crown on tooth 37 should be replaced IPS e.max CAD

IPS e.max System

General features

IPS e.max Press

IPS e.max ZirPress IPS e.max ZirCAD

IPS e.max CAD

IPS e.max Ceram

Cementation


Preparation

Preparation according to the preparation guidelines. Observe minimum thicknesses. IPS e.max CAD

IPS e.max System

General features

IPS e.max Press

IPS e.max ZirPress IPS e.max ZirCAD

IPS e.max CAD

IPS e.max Ceram

Cementation


Intra-oral imaging

Intra-oral imaging and subsequent CAD/CAM process with the CEREC速 3 System. IPS e.max CAD

IPS e.max System

General features

IPS e.max Press

IPS e.max ZirPress IPS e.max ZirCAD

IPS e.max CAD

IPS e.max Ceram

Cementation


Finishing

Smooth out attachment points and finish the restoration with suitable grinding instruments. Observe minimum thicknesses and contact points. IPS e.max CAD

IPS e.max System

General features

IPS e.max Press

IPS e.max ZirPress IPS e.max ZirCAD

IPS e.max CAD

IPS e.max Ceram

Cementation


Step-by-step

Try-in in blue state. Fixation with the Try-In pastes. Check the occlusion and articulation and adjust, if required. Grinding adjustments must be done in the „blue“ state prior to the crystallization IPS e.max CAD

IPS e.max System

General features

IPS e.max Press

IPS e.max ZirPress IPS e.max ZirCAD

IPS e.max CAD

IPS e.max Ceram

Cementation


Preparation for Combination firing

Two auxiliary firing pastes are available, i.e. IPS Object Fix Flow and Putty. Putty is rather suitable for full crowns. The Flow version is suitable for veneers and partial crowns. IPS e.max CAD

IPS e.max System

General features

IPS e.max Press

IPS e.max ZirPress IPS e.max ZirCAD

IPS e.max CAD

IPS e.max Ceram

Cementation


Preparation for Combination firing

Select the largest possible IPS e.max CAD Crystallization Pin

This IPS e.max CAD Crystallization Pin is too small and thus unsuitable

IPS e.max CAD

IPS e.max System

General features

IPS e.max Press

IPS e.max ZirPress IPS e.max ZirCAD

IPS e.max CAD

IPS e.max Ceram

Cementation


Preparation for Combination firing

Fill the restoration with PS Object Fix Putty auxiliary firing paste and press the Crystallization Pin deeply into the paste. IPS e.max CAD

IPS e.max System

General features

IPS e.max Press

IPS e.max ZirPress IPS e.max ZirCAD

IPS e.max CAD

IPS e.max Ceram

Cementation


Preparation for Combination firing

Smooth out forced out auxiliary firing paste using a plastic spatula (OptraSculpt) so that the pin is securely in place. Make sure that the external surfaces of the restoration are not contaminated IPS e.max CAD

IPS e.max System

General features

IPS e.max Press

IPS e.max ZirPress IPS e.max ZirCAD

IPS e.max CAD

IPS e.max Ceram

Cementation


Preparation for Combination firing

Remove any contamination from the outer surface of the crown using a brush dampened with water and dry. IPS e.max CAD

IPS e.max System

General features

IPS e.max Press

IPS e.max ZirPress IPS e.max ZirCAD

IPS e.max CAD

IPS e.max Ceram

Cementation


Combination firing - IPS e.max CAD Crystall./Glaze

2 possibilities for characterization/glazing Variant 1 - Paste:  Apply the glaze paste on the “blue” restoration  Apply Shades and Stains into the unfired paste

Variant 2 - Spray:  Apply Shades/Stains directly on the “blue” restoration  Fix with Glaze Spray IPS e.max CAD

IPS e.max System

General features

IPS e.max Press

IPS e.max ZirPress IPS e.max ZirCAD

IPS e.max CAD

IPS e.max Ceram

Cementation


Characterization Guide

Slight characterizations on the buccal surface with IPS e.max CAD Crystall./Shade Incisal and Stains.

Occlusal characterizations with IPS e.max CAD Crystall./Shades and Stains.

IPS e.max CAD

IPS e.max System

General features

IPS e.max Press

IPS e.max ZirPress IPS e.max ZirCAD

IPS e.max CAD

IPS e.max Ceram

Cementation


Characterization Guide

Too thick layer of IPS e.max CAD Crystall./Shades and Stains.

IPS e.max CAD

IPS e.max System

General features

IPS e.max Press

IPS e.max ZirPress IPS e.max ZirCAD

IPS e.max CAD

IPS e.max Ceram

Cementation


Variante A – Paste Glaze

IPS e.max CAD

IPS e.max System

General features

IPS e.max Press

IPS e.max ZirPress IPS e.max ZirCAD

IPS e.max CAD

IPS e.max Ceram

Cementation


Variant A - Glaze Paste

Apply IPS e.max Crystall./Glaze Paste evenly directly on the „blue“ restoration… IPS e.max CAD

IPS e.max System

General features

IPS e.max Press

IPS e.max ZirPress IPS e.max ZirCAD

IPS e.max CAD

IPS e.max Ceram

Cementation


Variant A - Glaze Paste

‌ and apply mixed IPS e.max CAD Crystall./Shades and Stains directly into the unfired Glaze Paste. IPS e.max CAD

IPS e.max System

General features

IPS e.max Press

IPS e.max ZirPress IPS e.max ZirCAD

IPS e.max CAD

IPS e.max Ceram

Cementation


Variante B – Spray Glaze

IPS e.max CAD

IPS e.max System

General features

IPS e.max Press

IPS e.max ZirPress IPS e.max ZirCAD

IPS e.max CAD

IPS e.max Ceram

Cementation


Variant B - Glaze Spray

Apply mixed IPS e.max CAD Crystall./Shades and Stains directly on the blue restoration‌ IPS e.max CAD

IPS e.max System

General features

IPS e.max Press

IPS e.max ZirPress IPS e.max ZirCAD

IPS e.max CAD

IPS e.max Ceram

Cementation


Variant B - Glaze Spray

c 10

m

‌ and spray an even layer Shake of IPS e.max Crystall./Glaze Spray on the restoration. Shake well before use and between the individual bursts. IPS e.max CAD

IPS e.max System

General features

IPS e.max Press

IPS e.max ZirPress IPS e.max ZirCAD

IPS e.max CAD

IPS e.max Ceram

Cementation


Variant B - Glaze Spray

Spray the IPS e.max CAD Crystall./Glaze Spray directly on the unfired Crystall./Shades and Stains. Spray the restoration from all sides while simultaneously rotating it. Shake well between the individual bursts. IPS e.max CAD

IPS e.max System

General features

IPS e.max Press

IPS e.max ZirPress IPS e.max ZirCAD

IPS e.max CAD

IPS e.max Ceram

Cementation


IPS e.max CAD

IPS e.max System

General features

IPS e.max Press

IPS e.max ZirPress IPS e.max ZirCAD

IPS e.max CAD

IPS e.max Ceram

Cementation


Optional: Adjustments ďƒ˜ for minor adjustments (e.g. proximal contact points) ďƒ˜ for adjustments both in the combination firing or in a separate corrective firing

Application of the mixed Add-On material on the blue restoration before crystallization

Application of the mixed Add-On material on the crystallized restoration

IPS e.max CAD

IPS e.max System

General features

IPS e.max Press

IPS e.max ZirPress IPS e.max ZirCAD

IPS e.max CAD

IPS e.max Ceram

Cementation


Combination firing (crystallization / Glaze firing)

Place the restoration near the center of the Crystallization Tray and conduct the Combination firing (P1) in the Programat CS furnace. IPS e.max CAD

IPS e.max System

General features

IPS e.max Press

IPS e.max ZirPress IPS e.max ZirCAD

IPS e.max CAD

IPS e.max Ceram

Cementation


Preparing for cementation

Remove the cool restoration from the IPS Object Fix Putty and ‌

IPS e.max CAD

IPS e.max System

General features

IPS e.max Press

IPS e.max ZirPress IPS e.max ZirCAD

IPS e.max CAD

IPS e.max Ceram

Cementation


Preparing for cementation

‌ clean the restoration. Remove residue of IPS Object Fix with ultrasound in a water bath. IPS e.max CAD

IPS e.max System

General features

IPS e.max Press

IPS e.max ZirPress IPS e.max ZirCAD

IPS e.max CAD

IPS e.max Ceram

Cementation


Preparing for cementation

Check the occlusion after crystallization.

IPS e.max CAD

IPS e.max System

General features

IPS e.max Press

IPS e.max ZirPress IPS e.max ZirCAD

IPS e.max CAD

IPS e.max Ceram

Cementation


Etching and silanating

Etch the restoration with IPS Ceramic Etching Gel for 20 sec. before permanent insertion. IPS e.max CAD

IPS e.max System

General features

IPS e.max Press

IPS e.max ZirPress IPS e.max ZirCAD

IPS e.max CAD

IPS e.max Ceram

Cementation


Etching and silanating

Silanate the etched restoration with Monobond-S.

IPS e.max CAD

IPS e.max System

General features

IPS e.max Press

IPS e.max ZirPress IPS e.max ZirCAD

IPS e.max CAD

IPS e.max Ceram

Cementation


Step by Step  Präparation reinigen, mit Wasser spülen und mit Luft trocknen  Primer A und B im Verhältnis 1:1 mischen und auf Dentin und Schmelz auftragen (Einwirkzeit auf Schmelz 30 Sek auf Dentin 15 Sek).  Primer dann mit wasser-/ölfreier Luft ausblasen  Multilink Automix in die geätzte und silanisierte Restauration applizieren.  Einsetzen der Restauration und Entfernung von überschüssigem Zement  Befestigung rein selbsthärtend: Überschüsse unmittelbar nach Einsetzen entfernen, v.a. in schlecht zugänglichen Bereichen.  Befestigung mit optionaler Lichthärtung: Überschüsse kurz (1-2 Sek) mit Licht anhärten, dann mit Scaler entfernen. Danach alle Fugen ca. 20 Sek. lichthärten

IPS e.max CAD

IPS e.max System

General features

IPS e.max Press

IPS e.max ZirPress IPS e.max ZirCAD

IPS e.max CAD

IPS e.max Ceram

Cementation


Cementation with Multilink Automix

Clean preparation, rinse with water, and dry with air. Depending on the cementation material used, subsequently apply the bonding system (as i.e. with Multilink Automix) IPS e.max CAD

IPS e.max System

General features

IPS e.max Press

IPS e.max ZirPress IPS e.max ZirCAD

IPS e.max CAD

IPS e.max Ceram

Cementation


Cementation with Multilink Automix

IPS e.max CAD

IPS e.max System

General features

IPS e.max Press

IPS e.max ZirPress IPS e.max ZirCAD

IPS e.max CAD

IPS e.max Ceram

Cementation


Cementation with Multilink Automix

Apply Multilink Automix directly into the silanated restoration

IPS e.max CAD

IPS e.max System

General features

IPS e.max Press

IPS e.max ZirPress IPS e.max ZirCAD

IPS e.max CAD

IPS e.max Ceram

Cementation


Cementation with Multilink Automix

Insert the restoration and remove excess material

IPS e.max CAD

IPS e.max System

General features

IPS e.max Press

IPS e.max ZirPress IPS e.max ZirCAD

IPS e.max CAD

IPS e.max Ceram

Cementation


Restoration in situ

IPS e.max CAD restoration in situ – high strength and highly aesthetic IPS e.max CAD

IPS e.max System

General features

IPS e.max Press

IPS e.max ZirPress IPS e.max ZirCAD

IPS e.max CAD

IPS e.max Ceram

Cementation


Eingliederung mit Multilink Automix

IPS e.max CAD restoration in situ – high strength and highly aesthetic

IPS e.max CAD

IPS e.max System

General features

IPS e.max Press

IPS e.max ZirPress IPS e.max ZirCAD

IPS e.max CAD

IPS e.max Ceram

Cementation


IPS e.max System

General features

IPS e.max Press

IPS e.max ZirPress IPS e.max ZirCAD

IPS e.max CAD

IPS e.max Ceram

Cementation


IPS e.max CAD chairside IFU Presentation 2008