DIAMANT-BESTREUTE LOCHSÄGE • DIAMOND GRIT HOLE SAWS
1 21 1500 211500
Diamant-bestreute Lochsäge, Nutzlänge 38 mm Diamond-grit hole saw, drill depth 38 mm | 1.1/2"
DIAMOND GRIT
ANWENDUNG ∙ APPLICATION
2 Keramik, Wandfliesen, Feinsteinzeugfliesen Ceramic, wall tiles, stoneware tiles
3
Porzellan, Stein Porcelain, stone
Mauerwerk
Glas
Brick & Masonry
Glass
Kunststoffe, Plexiglas, Glasfaser
38 mm 1 1/2"
Plastics, plexiglass, fibreglass
Bestseller – preisreduziert · Bestseller – price reduced Art. 21 211500014 1500 014 21 1500 016 211500016 211500018 21 1500 018 21 1500 019 211500019 211500020 21 1500 020 21 1500 021 211500021 211500022 21 1500 022 21 1500 024 211500024 211500025 21 1500 025 21 1500 027 211500027 211500028 21 1500 028 21 1500 029 211500029 211500030 21 1500 030 21 1500 032 211500032 211500033 21 1500 033
4
mm
I I I I I I I I I I I I I I I
14 16 18 19 20 21 22 24 25 27 28 29 30 32 33
Zoll Inch
9/16" 5/8" 11/16" 3/4" 25/32" 13/16" 7/8" 15/16" 1" 1.1/16" 1.7/64" 1.9/64" 1.3/16" 1.1/4" 1.5/16"
€
Art.
9,85 10,20 11,60 12,70 13,35 14,00 14,65 16,10 16,70 18,20 18,85 19,55 20,20 21,50 22,15
21 1500 035 211500035 21 1500 037 211500037 211500038 21 1500 038 21 1500 040 211500040 211500041 21 1500 041 21 1500 043 211500043 211500044 21 1500 044 21 1500 045 211500045 211500046 21 1500 046 21 1500 048 211500048 211500050 21 1500 050 21 1500 051 211500051 211500052 21 1500 052 21 1500 054 211500054 211500055 21 1500 055
mm
I I I I I I I I I I I I I I I
35 37 38 40 41 43 44 45 46 48 50 51 52 54 55
Zoll Inch
1.3/8" 1.7/16" 1.1/2" 1.9/16" 1.5/8" 1.11/16" 1.3/4" 1.49/64" 1.13/16" 1.7/8" 1.31/32" 2" 2.1/16" 2.1/8" 2.3/16"
€
Art.
23,45 23,50 24,15 26,00 26,95 28,20 28,85 29,60 30,15 31,45 32,55 33,90 34,55 35,85 37,10
21 1500 057 211500057 21 1500 059 211500059 211500060 21 1500 060 21 1500 064 211500064 211500065 21 1500 065 21 1500 067 211500067 211500068 21 1500 068 21 1500 070 211500070 211500073 21 1500 073 21 1500 076 211500076 211500079 21 1500 079 21 1500 083 211500083 211500086 21 1500 086 21 1500 089 211500089 211500092 21 1500 092
mm
I I I I I I I I I I I I I I I
57 59 60 64 65 67 68 70 73 76 79 83 86 89 92
Zoll Inch
2.1/4" 2.5/16" 2.3/8" 2.1/2" 2.9/16" 2.5/8" 2.43/64" 2.3/4" 2.7/8" 3" 3.1/8" 3.1/4" 3.3/8" 3.1/2" 3.5/8"
€
Art.
37,75 39,05 39,65 42,25 42,35 44,40 45,05 48,05 50,70 52,05 54,05 56,70 60,70 62,70 66,30
21 1500 095 211500095 21 1500 098 211500098 211500102 21 1500 102 21 1500 105 211500105 211500108 21 1500 108 21 1500 111 211500111 211500114 21 1500 114 21 1500 121 211500121 211500127 21 1500 127 21 1500 133 211500133 211500140 21 1500 140 21 1500 146 211500146 211500152 21 1500 152
mm
I I I I I I I I I I I I I
95 98 102 105 108 111 114 121 127 133 140 146 152
Zoll Inch
Kleinere ab 5 mm siehe S. 614 Art. 21 1510. Achtung: Die Zollabmessungen entsprechen nicht exakt den mm Durchmessern. Smaller from 5 mm see page. 614 Art. 21 1510. Attention: The inch sizes do not correspond exactly to the mm diameters
5
21 1500 211500
DIAMOND GRIT
ZUBEHÖR ∙ ACCESSORIES
EIGENSCHAFTEN ∙ PROPERTIES Schwere Ausführung mit solider Grundplatte
6
(Für ein Mehr an Stabilität sowie größerer Rundlauf- und Seitenschlagsgenauigkeit) Die ideale Lochsäge für Bohrungen in schwierigsten, harten sowie abrasiven Materialien wie: → Härteste keramische Fliesen → Alle Sorten von Stein → Porzellan → Alle Sorten von Mauerwerk → Glas → Glasfaserverstärkte / Kohlefaserverstärkte Kunststoffe (GFK /CFK)
7 S
Heavy construction with solid base plate
(Gives a higher stability as well as concentric running exactness) The ultimate hole saw for hard-to-cut materials such as: → Hardest-ceramic tiles → All kinds of stones → Porcelain → All types of masonry → Glass → Glass fiber reinforced plastics / carbon fiber reinforced plastics (GRP / CRP)
MACHI
NE
8 OIL
9
10
Anwendungshinweis:
Application note:
Aufnahmen Art. 21 0026 14-30 mm sowie Art. 21 0030 14-30 mm werden mit dem langen Zentrierbohrer 6,35 × 80 mm Art. 21 0032 geliefert. Dieser 80 mm lange Zentrierbohrer überragt die Lochsägen mit den Durchmessern: 14-16 mm ca. 5 mm 20-30 mm ca. 14 mm (siehe Bild ➊)
Arbor Art. 21 0026 14-30 mm and arbor Art. 21 0030 14-30 mm comes with the long center drill (6,35 × 80 mm) Art. 21 0032. This 80 mm long center drill rises above the hole saws with diameters: 14-16 mm approx. 5 mm 20-30 mm approx. 14 mm (see picture ➊)
Bei harten Materialien wie Fliesen, Porzellan, Stein usw. empfehlen wir daher bei Lochsägen 20-30 mm den kürzeren Zentrierbohrer zu verwenden. Artikel 21 0046, Länge 70 mm. Unbedingt empfehlenswert bei Fußbodenfliesen um ggf. die FußbodenHeizungsschleifen mit dem längeren Zentrierbohrer nicht zu beschädigen. Aufnahmen 32-152 mm kommen bereits mit dem kürzeren Zentrierbohrer (Art. 21 0046) (siehe Bild ➋)
For hard materials such as ceramic, porcelain, tiles, stone etc. we recommend from hole saw 20-30 mm the shorter center drill article 21 0046, length 70 mm. Highly recommended for drilling in floor tiles with underneath floor heating loops. The longer center drill could damage the heating loops. Arbor 32-152 mm comes already with the shorter center drill (Art. 21 0046) (see picture ➋)
Die Zentrierbohrer müssen nur zu Beginn des Bohrvorgangs verwendet werden. Nachdem die Lochsäge ca. 1 mm in das Material vorgedrungen ist, kann der Zentrierbohrer entfernt werden. Um übermäßige Hitzeentwicklung zu vermeiden, sollte mit Wasser gekühlt werden.
The center drill must be used only at the start of the drilling operation. After the hole saw has cut about 1 mm into the material, the center drill can be removed. Use water as a coolant to prevent heat build up on the cutting surface.
Index 612
INDUSTRIAL TOOLS DIVISION Weitere Informationen erhalten Sie telefonisch unter +49 33675-7265-0 oder schreiben Sie eine Mail an mail@karnasch.tools. For more informations please call +49 33675-7265-0 send a mail to mail@karnasch.tools.
€
3.3/4" 68,30 3.7/8" 70,35 4" 73,95 4.1/8" 76,05 4.1/4" 78,10 4.3/8" 80,10 4.1/4" 82,15 4.3/4" 86,95 5" 84,25 5.15/64" 88,40 5.1/2" 93,25 5.3/4" 99,15 6" 101,45