CARBURETOR HEATING SYSTEM
ELEC
–
+
* 5. Carburetor heater • Remove the carburetor heater from the carburetor. • Connect the pocket tester (Ω × 1) to the carburetor heater. Tester (+) lead → Carburetor heater terminal 1 Tester (–) lead → Carburetor heater body 2 • Measure the carburetor heater resistance. INCORRECT
Carburetor heater resistance 6 ~ 12 Ω at 20 °C (68 °F) CORRECT
Replace the carburetor heater.
6. Wiring connection • Check the connections on the entire carburetor heating system. Refer to “CIRCUIT DIAGRAM”. CORRECT
POOR CONNECTION
Properly connect the carburetor heating system.
This circuit is not faulty.
9 - 59