TROUBLESHOOTING
DRIV
Troubleshooting chart When basic condition “a” and “b” exist, check the following points: Elevate and spin both wheels. Feel for wheel YES Replace the wheel bearing. bearing damage. (Refer to “STEERING SYSTEM” and “REAR KNUCKLE AND STABILIZER” in chapter 8.) NO
Check the wheel nuts and hub nuts for tight- NO Torque to specification. ness. (Refer to “FRONT WHEELS AND BRAKE DISCS” and “REAR WHEELS AND BRAKE DISC” in chapter 8.) YES
Check the front constant velocity joints. Feel NO Constant velocity joint bearings and differenfor bearing damage. tial gear bearings are probably not damaged. Repeat the test or remove the individual components. YES NO Check the parking brake adjustment.
Adjust per instructions. (Refer to “ADJUSTING THE PARKING BRAKE” in chapter 3.)
YES
Check the rear constant velocity joints. Feel NO Constant velocity joint bearings and final for bearing damage. drive gear bearings are probably not damaged. Repeat the test or remove the individual components. YES
Remove the drive shaft components.
7-3