Specialist Tool Solutions
NEW PRODUCTS SPECIAL OFFERS
JANUARY - MARCH 2016 www.sykes-pickavant.com
Tel: 01543 679900 www.sykes-pickavant.com
WORKSHOP EQUIPMENT Mechanical Headlight Beam Testers - MOT Approved & Pre-Inspection
NEW
• Features rotating column with adjustable mirror visor for accurate alignment to vehicle • Luxmeter with graduated analogue scale for accurate light intensity measurement • Easily adjustable vertical sliding mechanism by self lubricating sliders • Features built in MOT beam checking panel • Suitable for all headlight types including Xenon
02683000 MOT Approved Headlight Beam Tester - LV
02695000 Pre-Inspection Headlight Beam Tester
• 3.7 metre rail kit / column height: 1.66m • Base mounted on double rail for ease of use (self install only)
• Portable base on 3 wheels (self install only) • Column height: 1.66m
£635.00
£595.00
02688000 MOT Approved Headlight Beam Tester - HGV • 4.5 metre rail kit / column height: 1.66m • Base mounted on double rail for ease of use (self install only)
NEW
£745.00
Silver Series range of Hydraulic Workshop Presses equipped with a two-speed manual pump, overload safety valve, automatic arm back-run system and V blocks • Heavy duty steel frame Width Depth Bed Depth Range Weight • Two speed pump Part No. Rating Height (mm) (mm) (mm) (mm) (mm) (kg) • Overload safety valve 53436000* 15T 1930 920 650 170 85 - 950 150 • Automatic arm return • Pressure gauge 53436200* 20T 2030 940 650 180 65 - 1030 165 • V blocks • Manufactured in the EU 53436300* 25T 2030 950 650 180 70 - 1030 170 • Piston over-travel limit stop 53436400* 30T 2060 1120 650 200 115 - 1020 230 • Winch for table (For models 53436400 & 53436500)
Other sizes of press are available - Contact Customer Services for details
53436500
1220
650
210
70 - 1065
370
£669.00 £869.00 £989.00 £1549.00
N.B. Delivery charge for UK Mainland Only is £65.00 + VAT. For other areas, please contact Customer Services
NEW
Press Guard
• Versatile fitting to mount onto most types of workshop press • Clamp allows for easy height adjustment • Steel construction and grille mesh designed to increase workshop safety • Detachable guard piece for job setting
1
2290
£549.00
*Recommended for use with Universal Press Support Block - 08770000 - See below
53455100
£99.95
50T
Price
08770000 Universal Press Support Block • Easily press bearings on a variety of suspension arms • Three point contact guarantees a perfect, safe support • Adjustable height anvil bolts • Swivel element for added versatility • Suitable for use with presses up to 30T
£219.00
3858’ RANGE
SPRINGS HAVE EVOLVED....HAVE YOUR TOOLS? 385800SP Heavy Duty Pneumatic Coil Spring Compressor Workstation Universal piece of equipment for assembling and disassembling struts and coil springs on cars, 4WD’s and LCV’s. Includes 2 x standard brackets (78-130mm / 105-182mm) and 1 x strut vice
AUTOMATIC JAW LEVELLING PIVOTS TO COMPENSATE & HOLD ALL COIL SPRINGS INCLUDING LEFT HAND COILS
FULL HEIGHT STEEL SAFETY GATES
INTERCHANGEABLE JAWS / VICE TO SUIT DIFFERENT SPRINGS
TOP ARMS & JAWS ADJUST AND LOCK TO SECURE SPRING
SAFETY SWITCH PREVENTS OPERATION WHEN GATES ARE OPEN
UNIQUE DOUBLE DEPTH FRONT PLATE ALLOWS SAFE WORK ON EXTRA-LONG STRUT ASSEMBLIES
ADJUSTABLE STRUT VICE WITH 4 x SETTING OPTIONS
4 x FLOOR MOUNTING HOLES FOR INSURANCE COMPANY COMPLIANCE
UP TO 2452KG OF FORCE (AT 10 BAR) AT THE TOUCH OF A PEDAL
OFFER £1595.00 SAVE £150.00
LIST PRICE £1745.00
INCLUDES
FREE
MERCEDES BRACKET SET (38480100) WORTH £239.95
38480200
UPPER BRACKET FOR MERCEDES A, B, C, E CLASS & LOWER BRACKET FOR MERCEDES E CLASS
Additional accessories also available Visit www.sykes-pickavant.com for further details
38480400
38480600
Upper Jaw Set
Special Bracket
Special Bracket
• Suitable for high compression and close coil springs
• For VW Touareg / Porsche Cayenne
• For Nissan Qashqai / Renault reverse biase coils
385800-60
£42.95
NEW
£99.95
£69.95
385800-61
£119.95
NEW
Workstation Arm Extender - Pair
Workstation Swivel Jaws - Pair
• Mounts between original top arm and jaw attachment • Use to extend the length of the top spring mounting jaw position • Can be used singly to provide 10mm extension or as a pair for 20mm ext
• Mounts onto top arms in place of standard top jaws & contacts directly onto spring • Jaw ‘floats’ to follow changes in spring angle / profile during compression £149.95 • For use on both left and right handed coil springs MADE IN THE UK
38580400 Coil Spring Clamp
£49.95
• Tool to secure coil spring into lower bracket • Designed to hold the coil spring still during initial compression and restrict twisting through the bracket
38580200 Jaw Holder • For use with 3858 & 3868 workstation brackets • Includes: 3 x hanging hooks and 4 x slots for brackets
£99.95
2
Tel: 01543 679900 www.sykes-pickavant.com
BATTERY CARE A complete range of high quality Battery Booster Packs, covering a wide variety of applications including: Automotive, Agriculture, Plant, HGV, Marine & Aviation
ALL UNITS HAVE: LIFETIME CASE WARRANTY & 2 YEAR BATTERY WARRANTY
Pro-Start Booster Pack Pro-Start booster packs are perfectly safe for the on-board electronics on modern vehicles and are compatible with Petrol, Diesel & Hybrid vehicles
• Double insulated starting cables – 1.30 / 1.35 mtrs length • Illuminated voltmeter indicates booster charge level, booster & alternator function • Curved jaw clamps, fully insulated – blue clamp with LED lamp • Shock resistant, moulded case – (lifetime case warranty)
Voltage
Cranking Amps
Peak Amps
Price
12v
440
1600
£170.95
861001SP Pro-Start 700
12v
700
1860
£282.95
861002SP Pro-Start 800
12v
800
2370
£365.95
1400 / 700 1600 / 800
3720 / 1860 4740 / 2370
Part No. 861041SP
Description SOS Booster 440
Pro-Start 761001SP Plus 1400 Pro-Start 761006SP Plus 1600
12/24v 12/24v
£668.95 £885.95
“All booster packs include a mains 240V smart charger to maintain peak battery condition for long life & maximum performance”
Propulstation Booster Pack with Docking Station Eliminate the risk and frustration of an uncharged booster pack!
• Robust shell case design with 5mm shatterproof polyethylene • Long & flexible cables with double insulation • Robust, wide-opening clamps include copper trace carrying the current to the bronze jaws & protecting the spring against over-heating Part No.
Description
Voltage
Cranking Amps
521001AC 521001DC 521002AC 521002DC
Propulstation Propulstation Propulstation Propulstation
12v AC 12v DC 12v AC 12v DC
700 700 800 800
Peak Amps 1860 1860 2370 2370
Price
£469.95 £426.95 £535.95 £493.95
Choose from: - AC Model Supplied with mains AC charger for workshop / showroom use - DC Model Supplied with 5m cable and one-way diode for connection to vehicle electrics (Ideal for recovery vehicles)
Extend your batteries’ lifetime with an Accu-Smart® Automatic Battery Charger
03202500
• Tests 6V-12V batteries and 12V-24V volt charging & starting systems • Digital screen with integrated printer • Bad connection warning • Operating range: 40-2000 CCA
OFFER £279.95 SAVE £20.00
LIST PRICE £299.95
*Cigarette Lighter plug not included with 845121SP
3
Applications
NEW
Start & Stop Battery & Electrical System Analyser
• Suitable for Wet (Lead Acid), AGM, Gel & Fleece type batteries • No need for handling or mode selection, the charger works automatically, without external intervention, therefore it is not necessary to disconnect the battery from the vehicle before charging it • Manages and regulates the charge of the battery, so can be left connected on the battery permanently • Restarts in case of a power cut and provides total protection against short-circuits, peaks of voltage (AC or DC), inversion of polarity and over-heating spikes • Accessories included: Eyelets, Crocodile Clamps, Cigarette Lighter Plug*
Part No.
Rating
Price
845121SP
12 volts / 1 Amp
£35.95
845122SP
12 volts / 2 Amps
£47.95
845124SP
12 volts / 4 Amps
£63.95
845127SP
12 volts / 7 Amps
£92.95
845120SP
12 volts / 10 Amps
£115.00
• Tests EFB, VRLA / GEL, AGM Flat Plate, AGM Spiral and regular liquid batteries in seconds • Rating system: SAE (CCA) / DIN / EN / IEC & JIS
Note: Full product details for our battery care range can be found on our website. Please visit www.sykes-pickavant.com for details
TORQUE ‘Motorq’ Heavy Duty Torque Multipliers
• Single stage epicyclic gears, producing a 5 : 1 multiplication ratio • Use with conventional torque wrenches for heavy duty applications • Supplied with reaction bars, in plastic storage case Part No.
Input Dr.
Max. Input
Output Drive
Max. Output
Weight (kg)
Price
80060000
1/2” sq dr / 32mm hex
260Nm
3/4”
1300Nm
4.3
£659.00
80065500
3/4” sq dr / 36mm hex
540Nm
1”
2700Nm
4.5
£659.00
80093500 Universal Digital Torque Angle Gauge
• For turning torqued fasteners through a further angle, as per vehicle manufacturers’ specifications • Simple to use: Calibrate, set angle, mount and use • One single tool can be used on 1/4”, 3/8”, 1/2”, 3/4” drives • Magnetic attachment - Fits onto most ratchets, torque wrenches and power bars • Indicates increasing angle on LCD display • Works in both directions of rotation • Audible notice when setting reached • LED’s glow red when setting exceeded
80033000 ‘Motorq 330’ - 1/2” Push-Thru Torque Wrench
LIST PRICE £182.95
• 60 - 330 Nm / 45 - 250lbs.ft • Length: 684mm • Weight: 1.40kg
800400SP
‘Motorq 399’ - 3/4” Push-Thru Torque Wrench
SAVE £43.00
LIST PRICE £257.95
INCLUDES FREE CASE - SEE BELOW
• 150 - 700 Nm / 100 - 500lbs.ft • Length: 1150mm • Weight: 6.30kg
£420.00
INCLUDES FREE CASE - SEE BELOW
‘Motorq 500’ - 3/4” Push-Thru Heavy Duty Torque Wrench • 300 - 1000 Nm / 200 - 750lbs.ft • Length: 1475mm • Weight: 7.30kg
800550SP
OFFER £214.95
• 80 - 400 Nm / 60 - 300lbs.ft • Length: 676.5mm • Weight: 1.40kg
‘Motorq 400’ - 3/4” Push-Thru Heavy Duty Torque Wrench
800500SP
SAVE £50.00
LIST PRICE £149.95
80039900
OFFER £145.95 SAVE £37.00
OFFER £99.95
£420.00
INCLUDES FREE CASE - SEE BELOW
‘Motorq 550’ - Stepped 3/4” to 1” Heavy Duty Torque Wrench • 1” Sq. Dr (uses ¾” to 1” stepped convertor) • 700 - 1500 Nm / 500 - 1000lbs.ft • Length: 1475mm • Weight: 10.40kg
8005CASE Torque Wrench Case
£620.00
NEW
• Rugged blow moulded case suitable for 80040000 / 80050000 / 80055000
£29.99
Note: Torque wrench not included
4
Tel: 01543 679900 www.sykes-pickavant.com
COOLING Cooling System Pressure Test Kits
Provides an effective solution when pressure testing the cooling system to help locate internal and external leaks Comprehensive applications listing provided with each kit
331595V2
331400V2
‘315’ Series Cooling System Pressure Test Kit • Includes: - Hand Pump with Pressure Gauge & Quick-Release fitting - Hose Assembly c/w quick-release fitting - 16 x Threaded Cooling System Cap Adaptors - 3 x Bayonet Fitting Cooling System Cap Adaptors - 1 x Cap Adaptor wrench
OFFER £235.00 SAVE £54.95
LIST PRICE £289.95
XL Cooling System Pressure Test Kit
Updated kit now includes additional caps covering more: DAF, Renault, Caterpillar, Optare, MAN, Dart, Komatsu, JCB, Volvo construction and Agricultural vehicles • Includes: NEW LOWER PRICE - High capacity metal bodied & MORE APPLICATIONS! hand pump with Pressure Dual Gauge & Quick-Release fitting - Hose Assembly c/w quick-release fitting - 10 x Reservoir & Radiator Pressure Caps
OFFER £199.95
Scan the QR code to view an applications list
SAVE £100.00
LIST PRICE £299.95
03275000 Two Way Hose Clamp Plier
NEW
OFFER £19.95 SAVE £5.00
LIST PRICE £24.95
• Wide application plier for use on radiator clamps, fuel line clamps, tank ventilation line clamps and bearing clips • Special intersected slot design ideal for use in confined spaces • 16mm wide head more effectively grips hose clamp compared to general 9mm head pliers • Length: 205mm
03201000 Refractometer
OFFER £69.50
FEATURES INTERNAL LIGHT
SAVE £20.45
LIST PRICE £89.95
• Tests Coolant, Battery Acid, Screenwash and AdBlue using an optical prism test technique • Coolant - tests both propylene and ethylene based anti-freeze coolant solutions and determines the freezing point • Battery Acid - indicates the specific gravity of the battery electrolyte • Screen Wash - shows the freezing point of screenwash fluids in °C • AdBlue – Indicates % concentration of AdBlue additive
33165000 Speedfiller
£134.95
• For replacing the coolant after opening or draining the system • Eliminates airlocks during refilling through the use of vacuum • Includes multi-fit cone & adaptor to connect to ‘315’ Series kits
Universal Hose Clamp
SAVE £10.00
LIST PRICE £39.95
• Clamping Range: 8 - 70mm • 1/4” drive and thumb screw for adjustment
032000SP Antifreeze & Coolant Hydrometer - 2 Pack • For testing ethylene glycol and polypropylene glycol • Temp range: -5°C to -40°C
5
OFFER £29.95
03265000
2 PACK
OFFER £15.95 SAVE £7.95
LIST PRICE £23.90
COOLING ‘319’ Series Cooling System Pressure Testing Expansion Plug System Test Kits Designed to cover 3 types of system test: Leak Detection / Thermostat Operation / Temperature Testing
33190000
CAR KIT
33190500
‘319’ Series Cooling System Pressure Testing Expansion Plug System Test Kit
XL KIT
‘319’ Series Cooling System Pressure Testing Expansion Plug System Test Kit
• Features a self-testing metal hand pump and precision gauge, with specially designed pressure release valve for safe de-pressurising of cooling systems • Suitable for Radiators & Expansion Tanks with neck apertures from 21-50mm
• Uses air pressure for fast pressurisation & large capacity HGV & Plant Cooling Systems • Suitable for Radiators & Expansion Tanks with neck apertures from 33-65mm
OFFER £325.00 SAVE £20.95
£305.95
LIST PRICE £345.95
31370000
FOR BOTH PETROL & DIESEL ENGINES
Combined Petrol & Diesel Cylinder Leakage Tester Kit • Provides a direct indication to the location of the leak by measuring the rate of loss of compression for individual cylinders • Helps to diagnose worn / broken piston rings, burnt / leaking valves and faulty head gaskets • Includes a selection of glow plugs and an adjustable dummy injector • Supplied with M12 and M14 brass quick release spark plug adaptors
£249.95
31370500 Petrol only Cylinder Leakage Tester Kit
• As per kit above excluding glow plugs and dummy injector
£149.95
Combustion Leakage Testers
• Fast and accurate diagnosis of cylinder head gasket leaks • Suitable for use with both Petrol & Diesel engines • Supplied with standard and sensitive reaction test fluid (100ml)
33195000
33145500
Combustion Leakage Tester
• Quick connector for use with: 315 / 316 / 317 Series Cap Adaptors
Universal Combustion Leakage Tester • Quick test combustion leakage tester • Features 25 to 50mm cone
33145000 XL Combustion Leakage Tester
• For use with HGV, commercial and plant engines • Quick connector for use with 33140000 and 331400V2 cap adaptors
£99.95 £69.95
£84.95
• Reaction fluid also available to purchase individually: 33194200 - Standard 250ml and 33194400 - Sensitive 250ml
6
Tel: 01543 679900 www.sykes-pickavant.com
SUSPENSION 08256000 Ford Transit Ball Joint Tool - Manual Option
ON VEHICL SOLUTIONE
08253800 Ford Transit Rear Disc Separator Kit
NEW
• Press solution for removing the rear disc from the bearing hub MADE IN THE UK • The hub bearings on this type of Transit often seize in place, requiring extreme force to separate • Suitable for Ford Transits 2000 onwards (where rear discs are fitted - 5 stud)
• For the removal & installation of the lower front ball joints as found on Ford Transits 2000-2013
£172.50
MADE IN THE UK
08756000
Bearing References: SNR: R152.58 SKF: VKBA3589 Optimal: 302 255 Febi: 45355
£139.95
BESTSELLER
MADE IN THE UK
Ford Transit Bearing Press Kit
Successful removal of troublesome inner bearing race and reinstallation of complete bearing assembly • For the removal and installation of the front wheel bearing on Ford Transits 2000-2013 with the aid of a workshop press • Suitable for bearings on both 5 & 6 stud hubs • Removes the inner and outer bearing race
TIME SAVING TOOL NO CUTTING OF BEARING REQUIRED
£199.00
082545V2 Ford Transit Hub & Front Wheel Bearing Remover Kit
3 IN 1 TOOL
MADE IN THE UK
Updated slide hammer kit now includes larger hub plate and extra-long pillars to enable removal of hubs and front wheel bearings on six stud Transits • For Ford Transit Mk6 & Mk7 Hub and complete front wheel bearing removal • Features a heavy duty slide hammer which operates in two directions to achieve multiple operations in one tool
OFFER £299.00 Hub Removal
Outer Bearing Race Removal
08269000 Ford Transit Lower Arm Bush Tool
Inner Bearing Race Removal
MADE IN THE UK
• For the removal and replacement of the large rear bush on the lower arms of Ford Transits from 2000 – 2013 • Designed to be used with a 187000V2 press frame and ram • On vehicle solution with minimal strip down • Can also be used in a workshop press for lower arms when they have been removed from the vehicle
7
• Applications: Ford Transit Mk5 & Mk6 from 2000 to 2013 • OE Bush Numbers covered: 4042024, 4372132, 4540787 & 7372131
£99.00
SAVE £80.95
LIST PRICE £379.95
SUSPENSION Hydraulic Rams
Kits now include: 2” extension and foam cut-out for storage
150000V2
INCLUDES PRE-LOADING 30MM HEX
180000V2
OFFER £69.95
1500 Series 8 Tonne Hydraulic Ram
NEW
NEW DESIGN UPGRADE FOR 2016
SAVE £17.00
1800 Series 12 Tonne Hydraulic Ram
LIST PRICE £86.95
£109.95
• Standard power unit for SP hydraulic pulling • Standard power unit for SP suspension options and can also be used with many products and is 50% more powerful alternative SP puller applications than the original SP1500 Series 8 e.g. 3 leg pullers, ball joint pullers, tonne ram, creating reliable power hub pullers, suspension bush for tough applications removers etc CAN ACHIEVE UP TO 4 TONNES OF MECHANICAL FORCE PRIOR TO HYDRAULIC OPERATION
18700100 Universal Press Frame
OFFER £189.95
150000XT
SAVE £9.00
LIST PRICE £198.95
1500 Series 8 Tonne Extra Travel Ram
• Can also be used with SP 8 or 12 tonne hydraulic ram and press frame pressure screw - 18704100
187000V2 Universal Press Frame c/w 12T Hydraulic Ram • Updated unit now provides greater power • Open frame design - 200mm of clearance through frame • Includes adaptor ring (18780400) for use with 08780000 - Press & Pull Sleeve Kit and related press piece sets
£298.95
NEW
• 90mm of travel allows for reduced setting operations and saves time • In built hydraulic system - no external pump required • 4 x faster output operation than standard SP1500 Series ram “Fits all current 1500 Series Puller Range where the 15000000 ram is used and the 18700100 universal press frame for suspension work”
£329.95
Note: Legs and beams not included - Shown for illustration purposes only
12730600 Hydraulic & Mechanical Hub Puller Kit
FOR USE IN 3, 4 OR 5 LEG COMBINATIONS
• For use on a variety of wheel stud pattern applications - 4, 5, 6 stud hubs, with pitch circle up to 203mm • SP hydraulic ram allows for smooth, progressive application of up to 8 tonnes of force • Includes heavy duty force screw with impact handle where shock action is required OFFER £209.95 to ‘break’ stubborn hubs SAVE £45.00 LIST PRICE £254.95 • Leg Reach: 158mm • Stud Hole Diameter: 15.8mm
18705500 Press Frame Extension Legs & Nose Piece
£49.95
MADE IN THE UK
• Pair of 100mm legs fit onto original 187 press frame legs and extend the frame - internal capacity from 200 to 300mm
Adaptor Sets for Focus / Fiesta Trailing Arm Bushes
• For the removal and installation of trailing arm bushes MADE IN THE UK • Adaptors can be used in a press frame with either a 18704100 pressure screw (recommended) or a hydraulic ram *Note - Adaptor Ring 18780400 required
18732100
£99.95
Adaptor Set for Fiesta Trailing Arm Bushes
08070000
OFFER £115.95
Ball Joint Separator – HGV applications
LIST PRICE £139.95
SAVE £24.00
• Strong, heavy duty body with strengthened fork and lever allows for greater force to be applied • Can be upgraded to hydraulic power • Jaw Opening: 70mm • Jaw Throat Width: 36mm Jaw Throat Depth: 50mm
Applications: Fiesta ‘95-’02, KA ‘96-’08, Puma ‘96-’02
18732200 Adaptor Set for Focus Trailing Arm Bushes Applications: C-MAX ‘07- MPV, MKI ‘98-’04, MKII ‘04-, Kuga ‘08-, Mazda 3 (BK) ‘03-’09, Mazda 5 (CR/CW) ‘05- MPV, Volvo C30 ‘06-, Volvo C70 II ‘07-, Volvo S40 II ‘04-’12, Volvo V50 ‘04-’12
£99.95
For full application details, please visit our website: www.sykes-pickavant.com
8
Tel: 01543 679900 www.sykes-pickavant.com
LAND ROVER 18777000
MADE IN THE UK
Land Rover Discovery 3 & 4 Suspension Bush Master Kit
18775000 Land Rover Bush Adaptor Set
• Designed for the removal of seized / corroded bushes and installation of replacement bushes for Land Rover Discovery 3/4 and Range Rover Sport models • Only the bushes have to be replaced, saving the cost and time in replacing the complete arm • Lower arm bushes can be replaced on vehicle without having to remove the wheel • To be used in conjunction with the SP Universal Press Frame (18700100) and due to the nature of corroded components, the power of the SP 12 Tonne Hydraulic Ram is also required (18000000) (Can be purchased together as 187000V2 Universal Press Frame c/w 12 Tonne OFFER £599.00 Hydraulic Ram) SAVE £50.00 LIST PRICE £649.00
£139.95
MADE IN THE UK • For the efficient removal & refitting of bushes on traditional Land Rover models • Dedicated shaped press pieces for correct location / alignment • For radius arm, panhard bushes & general suspension bushes • Suitable for: Defender, Discovery 1 & 2, Classic Range Rover, Range Rover P38A & older Series Land Rovers • Includes 6 adaptor pieces for use in a workshop press with suspension parts removed from vehicle - Can be used with a press frame or C Clamp - N.B Requires 18775100 step plate
31424700 Land Rover TD5 Compression Tester
The only tool available to fully test the compression of all five cylinders • For use with existing Sykes-Pickavant compression test kits to measure cylinder compression on 5 cylinder diesel Land Rover TD5 engines made between 1998 & 2005 OFFER £39.95 • Unique tool that fits in place of original high SAVE £10.00 pressure fuel injector - not the glow plug LIST PRICE £49.95
18777100 Land Rover Discovery 3 & 4 Front Lower Kit
£259.00
Other individual kits also available - please contact Customer Services for details
314285V2
05050000
Diesel Engine Compression Test Kit - Land Rover
Land Rover Drop Arm Puller
• Extra heavy duty puller for the removal of drop arms from the toughest of vehicle applications • Ideal for Land Rover Discovery 1 & 2, Range Rover P38, Land Rover Defender and Ford Transit applications • The puller is designed to be used with the steering box already removed from the vehicle • Includes a force screw allowing a technician to effectively shock the drop arm to become loose from the steering box • Jaw spread capacity - 60mm • Jaw reach capacity - 80mm
£169.95
Includes TD5 Compression Tester • Checks engine compression under cranking conditions • Enables cylinder access through dummy glow plug adaptors • Built-in pressure relief valve enables repeat tests without dismantling • Applications include: Defender MK2 & MK3, Discovery 2, 3 & 4, Range Rover Sport & Range Rover 3, Freelander 1 & 2 and Evoque
£199.95
18771000
MADE IN THE UK
Land Rover Swivel Ball Joint Adaptor Set
03125000 Land Rover Viscous Fan Tool Set
£59.95
• Use both tools together to replace the cooling fan on Land Rover Discovery 3, Range Rover 3 and Range Rover Sport models (V6 engines only) • Extra long (650mm), thin design for easier working in confined spaces
9
• New “on vehicle” solution for the removal and replacement of twin swivel ball joints as fitted onto the front axles of two popular Land Rover models: Discovery 2 ‘98 – ‘04 and Range Rover P38A ‘94 – ‘02 • Uses the Sykes-Pickavant 187 Hydraulic Series press frame to deliver 12 tonnes of force, for a “take the press to the vehicle” solution (Inc in 18771100 only)
OFFER £169.95 SAVE £30.00
LIST PRICE £199.95
WORKSHOP TOOLS 01419000
04551000 11 Pc. Non Marking Trim Tool Set
Glow Plug & Spark Plug Thread Recovery Set
• For the repair of plug threads within the cylinder head • Repairs thread from the bottom, to minimise the risk of debris entering the engine • Covers thread sizes from M8 to M18
• Professional set of strong, flexible plastic angled, lever and panel pullers • Reduces risk of damaging / scratching surfaces
OFFER £114.95 SAVE £44.55
LIST PRICE £159.50
OFFER £39.95
02251000
SAVE £30.00
Stud Remover & Installer Kit
3/4” Impact Socket Set
LIST PRICE £69.95
• Unique design allows the installation & removal of studs without damaging the threads • Allows tightening & application of torque without thread damage • Sizes: - M6 x 1.0 - M8 x 1.25 - M10 x 1.25 - M10 x 1.50
69001200 15 Pc. XS Stubby Impact Socket Set
66088800 4 Pc. Removal & Replacement Set • Allows for easy replacement of seals and ‘o’ rings while reducing the risk of damage to seal or finished surface
Universal Extender - 340mm
NEW
£149.95 £29.95
• Provides additional leverage in a secure manner • Ideal for use with spanners, allen keys etc • Loosens tight connections on hard to reach areas
IDEAL FOR USE ON VW GROUP ELECTRICAL CONNECTORS
SAVE £4.00
LIST PRICE £21.95
Crows Foot Oil Filter Wrench
NEW
• For the removal and installation of the oil filter on Ford Duratorq and PSA 2.0 and 2.2 HDi / TDCi engines • Unique shaped design allows easier and faster access NO NEED TO • 27mm bi-hex with REMOVE HEADLIGHTS 1/2” drive (MONDEO) • Engine codes: DW10C / OFFER £14.95 DW12C
SAVE £3.00
68786000
SAVE £2.00
LIST PRICE £16.95
OFFER £17.95
03900100
LIST PRICE £17.95
• Includes 7 x popular socket sizes: 24, 27, 30, 32, 33, 36 and 41mm • 175mm extension
£69.95
• Includes 15 x 1/2” drive sockets (10-24mm) • Extra short low profile - 28mm - Ideal for use in confined, tight spaces • Ideal for use with 1/2” ultra short impact wrench - 90201300
69005500
OFFER £14.95
08921000 39 Pc. Universal Shock Absorber Tool Set
£149.95
• Enables the piston rod to be held whilst allowing the nut to be loosened or tightened • Includes - 2-tap & slot-profile socket - D-profile / Slotted bits - T-profile bits - 6-pt sockets & bits - XZN bit M12 • Ideal for use with 3858 compressor workstation (see page 2)
10
Tel: 01543 679900 www.sykes-pickavant.com
INJECTOR SERVICE & REMOVAL
FREE! VIBRO IMPACT AIR HAMMER
185800V2PP
WHEN YOU PURCHASE 185800V2PP
Hydraulic Injector Puller Kit c/w Hydraulic Pump and FREE ‘Vibro-Impact’ Air Hammer
90206000
WORTH £335.00
• Provides controlled force to aid the removal of seized / stubborn injectors where there is insufficient access for traditional slide hammers OFFER £1395.00 • Includes a multi-position frame, SAVE £402.90 with adjustable legs of different LIST PRICE £1797.90 lengths and a selection of mounting adaptors to allow alignment of the tool with the injectors on a wide variety of modern diesel engines • Supplied with injector adaptors for most modern injector types • 10 tonnes Hydraulic Hollow Cylinder provides the force • Includes aluminium bodied hand pump - 2 Speed, 10,000psi fitted with gauge, hydraulic hose and ¾” hydraulic coupler
185800V2
185810V2
Hydraulic Injector Puller Kit only
• As per 185800V2PP (above) excluding hydraulic pump and free ‘Vibro-Impact’ air hammer
Mechanical Hydraulic Injector Puller Kit
• As per 185800V2 kit (left) but includes a mechanical hydraulic ram OFFER £1099.95 • Allows use of the kit without the SAVE £100.00 need for a separate hydraulic pump LIST PRICE £1199.95
£999.95
NEW
08559000
8 Pc. Injector Removal Forks & Adaptor Set For use with 08585000 and 185800V2 • Add-on kit for use with 08585000 Heavy Duty Slide Hammer Injector Removal Kit (below) and 185800V2 Hydraulic Injector Puller Kit (above) • Universal set of adaptors for modern common rail diesel engines • Includes: - Adaptors to attach to the external thread of the injectors OFFER £79.95 SAVE £20.00 - Forks to attach to the body of LIST PRICE £99.95 the injector - Sockets to allow the injector to be pulled from different locations • Hook sizes: 12, 13.5, 16 and 26mm • Compatible thread sizes with 185800V2 (above)
40 Pc. Glow Plug Removal Kit
• For removing damaged / broken glow plugs from cylinder heads • Ideal for use where a glow plug has sheared off just below the hex, or flush with the cylinder head • Removes 8mm & 10mm glow plugs (M8 x 1.0 thread or M10 x 1.0 thread) • Comprehensive kit includes all necessary adaptors, centering & thread cleaning tools
OFFER £199.95 SAVE £50.00
LIST PRICE £249.95
017500V2
08585000
Diesel Injector Seat Cleaner Set
Heavy Duty Slide Hammer Injector Removal Kit
• For the removal of Bosch, Delphi Denso and Siemens injectors • Features a flexible u-joint adaptor for access in restricted areas • Includes 6 x Injector adaptors, 4 x Injector OFFER £245.00 Solenoid removers and 2 x Nozzle Extractors SAVE £50.00 LIST PRICE £295.00
11
085930V2
• Cleans injector seats and chambers when changing or reconditioning diesel injectors • Helps to avoid blow-back due to poorly seated injectors
OFFER £175.00 SAVE £44.00
LIST PRICE £219.00
ENGINE SERVICE 53406100
ONE KIT TREATS UP TO 50L OF DIESEL FLUID
DPF Service Kit
NEW £18.00
Fortron Diesel Particulate Treatment (DPF) has been formulated for two applications: 1. As a fuel tank additive to treat DPF contamination 2. As a preventive maintenance tool • Aids passive regeneration of the DPF • Helps to maintain engine performance / efficiency • Reduces soot & exhaust gas emissions • Suitable for all diesel fuels and fuel additive systems e.g. Eolys fluid
NEW
53406300
53406500
Total Fuel System Treatment
Diesel Cold Flow Improver
• Suitable for both Petrol and Diesel including bio-fuels and hi-tech diesels • Improves engine performance and reliability • Absorbs and removes water • Dissolves and prevents wax, gum and varnish deposits
• Used as a preventative product to help Diesel vehicles perform better in cold conditions • Keep waxes dispersed in fuel that could otherwise settle and lead to blocked filters and engine performance problems • Just add to the fuel tank
£6.95
08555000 Injector Extractor Kit
NEW
£7.95
NEW
• To aid the removal of seized / stubborn Denso injectors • Remove injectors independently from the engine by connecting the extractors to the edge of the injector • Suitable for Toyota, Nissan, Mazda, Opel / Vauxhall and Lexus
08598000 Universal Glow Plug Removal Kit
NEW
• For removing damaged and broken glow plugs from cylinder heads by effectively gripping the hex body of all types of M8, M9 and M10 glow plugs • Slide hammer assists in removal of glow plug and avoids damage to the cylinder head
£299.95 £279.95 Denso Injectors: - 23670 - 30080 - MB416600 - MB40A - 5870 - 13H50B - 11L 12182 - 23670 - 26011 - 23670 - 0R050 - 10J 06798
085900V2 Vibro Impact Glow Plug Remover Set
• For the effective removal of 8, 9, 10, 11 & 12mm glow plugs • Uses controlled impact torque to create vibration • Includes 4 low torque settings for controlled vibration (10, 20, 30, 40Nm) • Includes special long-reach glow plug sockets
OFFER £215.00 SAVE £44.95
LIST PRICE £259.95
*Patent Pending
31467500 Diesel Fuel System Bleeding Kit
£199.95
• Designed to allow the user to bleed / prime the MADE IN THE UK low pressure feed side of the diesel fuel system • Contains common sized low pressure pipe sets including: - Standard 8mm, 10mm and newer 9.65mm (3/8 inch) - Renault small & large - Ford • Typical coverage includes: Citroën, Fiat, Ford, Land Rover, Peugeot, Renault, Volvo & Vauxhall • Clear pipes for visability of air bubbles • Colour coded pipes for easy identification
31467000 Diesel Fuel System Bleeding Kit - Master Kit
• Includes 31467500 kit (as above) plus a low pressure fuel gauge (10bar), tee piece and ratchet pump • Gauge and tee piece enables the same pipes to be used for both bleeding and fuel pressure
£399.95
12
Tel: 01543 679900 www.sykes-pickavant.com
TESTING / AIR TOOLS 325200SP Portable 4 Gas Analyser with Printer
INCLUDES INFRA-RED PRINTER WORTH £150.00
MADE IN THE UK
• For fault diagnosis, tuning and pre-MOT testing • Truly portable hand-held gas analyser - Ultra light weight - only 1.1kg • Measures CO, HC, CO2, O2 (NOx model option available on request) to Class 1 accuracy • Suitable for both petrol and LPG vehicles and ideal for both static and dynamic testing • Internal memory stores up to 250 test results - manual & automatic recording options • Up to 4 hours internal battery life • Provides Lambda / AFR measurement and corrected CO • Pump speed control - Improves battery life • Bluetooth connectivity to PC (Free analytical software available to download) • Large graphic display • Includes printer and AC / 12v chargers
01493500 Digital LCD Circuit Tester
£1495.00
NEW
• Suitable for 6, 12 and 24v systems • LED indication for power (red) and ground (green) • Features crocodile clip with spring cable extendable to 3 metres • Stainless steel probe • Small testing current <10mA
£24.95
High Quality Air Tools that set the standard for Torque!
Impact Wrench Specifications: Drive
Max Torque Nm (Reverse)
Torque Nm (Fwd)
Noise (dBA)
Air Consumption (l / min)
Weight (kg)
Price
90201000
1/2”
1600
1084
94.2
135
1.8
£179.00
90201500 (Mini)
1/2”
680
500
93.5
130
1.08
£169.00
90201300 (Ultra-Short)
1/2”
680
500
95
134
1.3
£159.00
90202000
3/4”
2600
2000
97
210
3.2
90202500
3/8”
680
500
93.5
130
1.08
90203500
1/4”
90
90
98.2
105
0.9
90204500
1”
3100
2200
110
305
6.8
£499.00 £169.00 £139.00 £849.00
Part No.
90201700 1/2” Impact Wrench - 80Nm • Specially engineered for wheel changing • Max torque (Reverse): 1600Nm • Provides a reduced forward torque with a maximum power of 80Nm at 8 bar • Provides a safe mounting start torque, followed by the use of a torque wrench for final torque setting
90213000
Micro Die Grinder
£99.95
• Powerful mini device for small / fine grinding & milling • 1/8” drive / 70,000rpm • Ideal for work in confined spaces • Length: 137mm
13
NEW
OFFER £199.95
902013SP COMBINED OFFER!
SAVE £29.00
LIST PRICE £228.95
15 Pc. XS Stubby Impact Socket Set PLUS 1/2” Impact Wrench - Ultra Short • XS Stubby Impact Socket Set includes 15 x 1/2” drive sockets (10-24mm) (69001200) • 1/2” ultra short impact wrench (90201300)
+
£209.00
Individual Bits (3 Pack) also available
90213500 Micro Die Grinder Bit Set (5 Pack) • For use with Micro Die Grinder (left) • Contains five shaped ends suitable for precision work
SPECIAL PACK DEAL Part No.
£79.95
Ref.
Length
Diameter
Price
902135-01
40mm
3mm
£46.95
902135-02
3mm / 33mm Sphere - 4mm £53.95
902135-03
40mm
3mm
£46.95
902135-04
40mm
3mm
£46.95
902135-05
40mm
3mm
£46.95
AIR TOOLS 90227000 ‘Vibro-Impact’ Needle Scaler
NEW
• Additional part for use with 90206000 (below) • Oscillating effect of needles provides effective results for removal of rust and paint
1
£79.95
BESTSELLER
90238500
90237100
NEW
‘Vibro-Impact’ Concave Hammer Insert
• Additional part for use with 90206000 (below) • Concave design locates hammer insert forconcentrated effort • Ideal for use on bolts & pins • Length: 150mm
• Additional part for use with 90206000 (below)
2
£29.95
NEW
‘Vibro-Impact’ Pin - 6.5mm
3
£37.95
COMBINED INSERT DEALS
NO VIBRATION!
FOR USE WITH ‘VIBRO-IMPACT’ AIR HAMMER (90206000)
9020600A DEAL A - The Ultimate Kit OFFER £299.00 SAVE £25.65
• Includes insert items: 1, 2, 3, 4, and 5
OFFER £267.00
90206000
9020600B DEAL B - Chisel Kit
SAVE £68.00
LIST PRICE £335.00
‘Vibro-Impact’ Air Hammer
• A unique concept to aid the removal of seized suspension parts • The ‘Vibro-Impact’ system allows for the controlled application of force via an air powered impact hammer • Allows the operator to control & gradually increase the force being applied, in order to loosen seized components • Features a built-in shock-absorber in order to minimise risk of damage if too much pressure is accidentally applied • No vibration for user comfort
‘Vibro-Impact’ Chisels
• Grooved non-twist body shaft design securely locks into vibro-impact air hammer for precise use Part No.
Image
NEW
4
Description
Price
90236100
Sheet Metal Cutter
£33.95
90236200
Separator
£33.95
90236300
Half Round
£33.95
LIST PRICE £324.65
OFFER £169.00 SAVE £7.80
• Includes insert items: 4 and 5
LIST PRICE £176.80
9020600C DEAL C - Hammer Kit • Includes insert items: 1, 2 and 3
90237500
OFFER £129.00 SAVE £18.85
LIST PRICE £147.85
NEW
‘Vibro-Impact’ Exhaust Chisel Set
5
• Set of 2 x chisels for cutting the inner and outer exhaust tube for use with 90206000 (above)
£74.95 14
Tel: 01543 679900 www.sykes-pickavant.com
INDUCTION
SP’S EXPANDED RANGE OF INDUCTION HEATERS - THE COMPLETE SOLUTION All Sykes-Pickavant Induction Heaters use high frequency magnetic fields to create induction heat. When ferrous metallic objects are placed inside these magnetic fields, they heat up in SECONDS - expanding the metal which allows for fast and easy release
3 x VERSIONS NOW AVAILABLE!
• Operates cooler for better efficiency, handling and product longevity • Long operating cycle time • Includes 3 x coil attachments • Durable reinforced thermal plastic housing with slip resistant grenade style grip For further details please visit: www.sykes-pickavant.com
WINTER WARMER!
ANY SP INDUCTION HEATER + & COIL KIT FOR:
• Integrated CE filter improves handling of product • LED light illuminates work area • 1 year warranty - Parts/Labour • Carry Case with storage for all attachments
£645.00! SAVE £49.95
96015000
OFFER £645.00
960200SP
SAVE £49.95
LIST PRICE £694.95 SP 230v Induction Heater + with SP Coil Kit (96015000 - see below)
• Specifically designed for the UK/EU: 230v / 6 amp / 1000 watt with full CE certification
9602012VSP
12V BATTERY OPERATED SP 12v Induction Heater + with SP Coil Kit (96015000 - see below) • Specifically designed for the UK/EU: 12v / 70 amp / 840 watt with full CE certification OFFER £645.00 • Completely portable - works with any SAVE £49.95 12v battery pack or 12v battery LIST PRICE £694.95
960211SP
IDEAL FOR SITE WORK SP 110v Induction Heater + with SP Coil Kit (96015000 - see below)
• Specifically designed for the UK/EU: 110v / 6 amp / 1000 watt with full CE certification • Provides safe and near instant heat for site work, construction and factory maintenance users • Replaces the need for open flame options when heating components, making the completion OFFER £645.00 of on-site risk assessments far easier SAVE £49.95 LIST PRICE £694.95
Induction Heater Accessories
Choose from the following accessories that are compatible with our full range of Induction Heaters
96015000
960260SP
96025000
SP Rope Coil Set - x3
SP Coil Kit
• Contains 8 x popular sizes of interchangeable coils
£99.95
• Contains 3 x highly adaptable coils allowing user to shape to suit
SP Heat Pad
• For the removal of decals, graphics, stripes, emblems & body mouldings etc • Softens the adhesive to make removal simple & effective
£74.85 £67.95
15
FLUID HANDLING Pneumatic Oil Extractors
Designed to meet the requirements of the modern workshop as well as health & safety issues • Remove and extract waste fluids or oil from an engine • Combined volume capacity of 90 litres (70L tank & 20L drain bowl) • Works best at oil temperatures between 40-60° with suction speeds of up to 6 litres per minute • Visible fill level indicator • Powered from compressed air • Working pressure 8-10 Bar • Empty tank with compressed air at max. 1 bar pressure • Includes: - Adaptors for BMW, Mercedes, VW and Citroen - 4 x 700mm nylon tube probes with internal spring steel anti-kink wires - 2 x 700mm steel probes - 1 x 1000mm nylon probe for Transit vans WARNING: Do not use with corrosive or inflammable products
IDEAL FOR VEHICLES WITHOUT A SUMP PLUG
Mityvac Fluid Dispensing Kit
Pneumatic Oil Extractor
NEW
£269.00
53390500 Pneumatic Oil Extractor with 9 Litre Inspection Chamber
• Includes inspection chamber providing visual assurance that the suction facility is operating correctly • Waste oil becomes immediately visible in the chamber allowing the user easy assessment of the oil • Includes anti splash device
£325.00
NEW
MV6403SP
53390000
£229.00
• Designed for topping‐off fluid reservoirs including master cylinders, gear boxes transmissions, power steering reservoirs etc • Large (5‐litre) fluid capacity and 5’ long hose with dispensing wand and flow control valve make it ideal for accessing hard‐to reach reservoirs and fill plugs • Includes set of 10 adaptors for topping-up sealed transmissions & quick-connect coupler system for connecting adaptors • Includes: - Angled ATF refill adaptor for BMW, Honda, Nissan - Straight ATF refill adaptor for Ford, VW - Threaded ATF refill adaptor for Toyota, Mercedes, Volvo - Short & Long angled ATF refill adaptor for VW - Threaded ATF refill adaptor (DSG transmission / CVT transmission) for VW / Audi N.B. Not for use with flammable liquids such as petrol / diesel etc or with any other fluids at temperatures above 80°c
03430900 10 Pc. ATF Refill Adaptor Set • Includes set of 10 adaptors (as above) for topping-up sealed transmissions • See above for applications
36600500
STAINLESS STEEL 45L TANK
Fuel Extractor / Retriever
• Retrieve fuel following a filling error, removal of tank sender unit, changing or checking the fuel gauge, rinsing the fuel tank during body work etc • Emptying via tank filler neck or fuel lines
£448.95
36600700
Adaptor Set • Set of fittings to connect in line, before the injection pump (on most fuel systems) for safe emptying of fuel
£24.95
£69.95
38360000 Universal Engine & Gearbox Support
NO NEED FOR COSTLY MODEL SPECIFIC BRACKETS
• Designed to support the engine or gearbox when the engine mountings have been removed - e.g. when replacing timing / drive belts, water pumps etc • The unit is suspended from the chassis via support hooks, the engine / gearbox is supported by the support pad and is counter-balanced against the underside of the vehicle by the support arms OFFER £199.95 • Fully adjustable in all dimensions: SAVE £54.99 Ext: Min 630mm / Max 960mm LIST PRICE £254.94 Support Plate Adjustment: 190mm
16
Tel: 01543 679900 www.sykes-pickavant.com
WHEEL BEARING 08135500 GEN3 Wheel Bearing Kit
NEW
£299.95
ON VEHICLE SOLUTION
• Designed to remove the hub and bearing from aluminium multi-link suspension units with the aid of a pressure screw, adjustable legs and top plate to accommodate the different size bearings as found on VW group vehicles • This procedure is currently carried out with repeated heavy blows using a hammer to remove the heavily corroded bearing. This operation can easily damage surrounding components such as steering knuckles and ball joints or fracture the aluminium wishbone Applications: Audi A4 00-, Audi A5 07-, Audi A6 97-, Audi A7 10-, Audi A8 94-, Audi Q5 08-, Audi R8 07- Seat Exeo 08-, VW Passat 03-
GEN2 Bearing Removal & Installation The GEN 2 type of wheel bearing is predominantly fitted to models from: Ford, Land Rover, Mazda, VW Group and Volvo • Due to the tolerances in the bearing, manufacturers do not recommend using a workshop press to fit these type of bearings • Includes a variety of different diameter tool kits covering a range of sizes to suit the different GEN2 bearings used by vehicle manufacturers • Designed to distribute pressing force evenly through the outer bearing race and also allows for the suspension leg to remain in-situ on the vehicle when fitting new bearings
SIZES / APPLICATIONS 62mm - Audi A2, VW Lupo (Front) 66mm - Skoda Fabia, VW Fox (Front), Polo 72mm - Audi A1, Audi A2, Seat Cordoba, Ibiza, Skoda Fabia, Roomster, VW Polo (Front), VW Fox with PAS (Front) 78mm - Ford Focus II, C-Max, Volvo C30, C70, S40, V50 (Front), Mazda 3 82mm - Ford Mondeo, Galaxy, S-Max, Land Rover Freelander 2, Volvo S80, V70, XC60, XC70 85mm - VW Multivan, Touareg, Transporter (Front / Rear) Part No.
081220V2 Now supplied in 2 x cases with foam inserts
Description
Sizes
GEN2 All Sizes Master Kit
62mm / 66mm / 72mm / 78mm / 82mm / 85mm
GEN2 Essential Kit
72mm / 78mm / 82mm
08129000
GEN2 VW Group Kit
62mm / 66mm / 72mm / 85mm
08128000
GEN2 Ford / Volvo / Land Rover / Mazda Kit
78mm / 82mm
081220V2
BESTSELLER
08129500
Price £845.00 £599.00 £645.00 £345.00
Individual Kits also available - Please contact Sykes-Pickavant for further information. Note: Spare Parts are available for all kits. Please see our website / catalogue
08120000 Universal Wheel Bearing Kit
OFFER £249.95 SAVE £50.00
LIST PRICE £299.95
• For the removal and installation of flanges and wheel bearings, without the need for removal of suspension struts or wheel hubs from the vehicle • Remove and install wheel bearing without hub removal • Includes flange extraction bolts reducing time taken to complete overall job
17
08100000 Universal Bearing Ring Puller
OFFER £229.95 SAVE £50.00
LIST PRICE £279.95
• For the removal of bearings, races, sleeves etc • Removes the need for cutting tools - greatly reduces bearing ring removal time • Unique patented design - specially designed cutting edges on puller legs • ‘Loose / Tight’ pulling principal means force is applied evenly at all points on the bearing ring • Suitable for all types of bearings and rings from 40 - 60mm diameter • Spread: 40-60mm • Reach: 85mm
WORKSHOP EQUIPMENT 53404500
53401500
Fortron Power Steering Flush Machine
Fortron Coolant Flush Machine • Provides a quick and effective way of flushing and exchanging the complete cooling system fluid • Suitable for all types of coolants & vehicles • Includes a set of multi-application adaptors & fittings • Air operated • Ensures Engine Cooling System reliability and performance
• Replaces 100% of steering fluid • Takes on average 10 minutes per service • Extends the service life of (often overlooked) system • Smoother, quieter and more reliable operation • Revitalises and conditions ‘o’ rings and seals
£1995.00
£995.00
Fluid Accessories Part No.
Description
Price
53401600
Coolant Flush Treatment Additive
£11.49
53402500
ALLOWS FOR UNATTENDED OPERATION
Fortron Automatic Transmission Fluid Flush Machine - Fully Auto
Fluid Accessories Part No. 53404600
Description
Price
Power Steering Flush Service Kit
£11.49
53405500 Fortron Automatic Transmission Fluid Flush Machine - Manual
• Can replace up to 100% of transmission fluid • Specify exact amount of fluid to change • Digital control panel allows for fully automated control Simply set amount to be exchanged & start • Safely cleans up and extends the service life of automatic transmissions • Includes comprehensive adaptor set
• Manual controls for ATF exchange process • Complete fluid exchange, including cooler, converter and cooler lines • Includes range of fittings and adaptors
£3495.00
£2199.00
Fluid Accessories
Fluid Accessories
Part No.
Description
Price
Part No.
Description
Price
53402600
ATF Flush Service Kit
£11.49
53402600
ATF Flush Service Kit
£11.49
For further details of the Fortron Fluid Service System range, please visit our website: www.sykes-pickavant.com
18
Tel: 01543 679900 www.sykes-pickavant.com
BRAKE BLEEDING & SERVICE 34400500 240v Electric Brake Bleeder - 6 bar
NEW
• Allows one man operation for brake and clutch bleeding • Compatible with ABS systems • Rugged impact resistant moulded housing • Long supply hose (3.2 metres) allows for use with vehicle raised on a ramp • Adjustable pressure output from 0 - 6 bar to suit vehicle • Large internal storage area for brake fluid containers up to 10 litres • Includes aluminium SP Euro cap angled screw type for popular vehicle connection • Additional range of caps also available - Maximum Pressure: 6 bar - Weight: 10kg
OFFER £475.00
12v Automatic Brake Bleeder - 6 bar Now includes regulator from 0 to 6 bar and 4 x wheels (2 x front swivel) • Allows one man operation for brake and clutch bleeding • Compatible with ABS systems • 12v powering with reverse polarity warning • Stainless steel body • Includes pump with automatic shut off valve • 5L reservoir with visible (min) level indication • Auto power OFF when min level reached • Large reservoir opening for easy cleaning • Includes aluminium SP Euro cap angled screw type • Power cable for brake fluid with quick coupling system (Length: 4m)
Compatible with 12v and 240v brake bleeders
34301900 NEW Brake Bleeder Cap Land Rover Applications: Discovery 2 (1998-2004) Freelander (1998-2001) Rover MG F-Steptronic, MG ZR 160, MG IVVC, 25, 200, 214, 800
UPDATED MODEL
£649.00
SAVE £24.00
LIST PRICE £499.00
Brake Bleeder Caps
343001V2
£39.95
34302100 NEW Brake Bleeder Cap Chrysler / Jeep
34302300 NEW Brake Bleeder Cap Honda
Applications: 300C Touring + Sedam, Neon, PT Cruiser, Viper, Voyager LE, SE, LX Jeep Cherokee, Grand Cherokee, Wrangler, Wrangler Sport
Applications: Accord, Civic, CRV, Jazz, Legend, S2000, Stream
£24.95
£69.95
Note: The above caps are also available for the Drain Twin Pressure & Vacuum Brake Bleeder (34500000). Please replace the ‘343’ reference at the beginning of the part number with ‘345’ e.g. 34501900. Contact Customer Services for pricing.
03614000 Air Assisted Caliper Piston Wind Back Tool Kit
• Air operated ram applies pressure to the caliper piston, while the handle is rotated by hand • Reversible – works on both RH and LH applications • Magnetic head • Supplied with nine adaptors
Brake Bleeder Cap - Starter Sets
• Starter cap bleeder sets suitable for ‘343’ range of electric brake bleeders and ‘345’ range of pneumatic brake bleeders • Precision engineered aluminium caps
34303000 Brake Bleeder Cap - Starter Set
Suitable for ‘343’ range of electric brake bleeders Applications - New Ford Fiesta (Bayonet Type Cap) (34301000) OFFER £99.95 SAVE £20.00 - Nissan / Asian (Bayonet Type Cap) (34301100) LIST PRICE £119.95 - Euro Cap - Angled (Screw Type Cap) (34301400)
34503000 Brake Bleeder Cap - Starter Set
OFFER £69.95 SAVE £30.00
LIST PRICE £99.95
19
Suitable for ‘345’ range of pneumatic brake bleeders Applications - New Ford Fiesta (34501000) - Nissan / Asian (34501100) - Euro Cap - Angled (34501400)
OFFER £135.95 SAVE £20.00
LIST PRICE £155.95
03490000 Speedyvac Brake Bleeder Kit
• Float valve shuts vacuum down when container reaches full to prevent dangerous brake fluid spray if capacity is accidently exceeded • Compact size (800ml capacity) • Internal shut off valve closes when not in use • Includes Autofiller unit (500ml capacity)
£99.00
ONE USER OPERATION
COMPRESSION & PRESSURE TESTING UPDATED KIT Common Rail Diesel (CRD) High Pressure Test Kit
314650V2
£549.95
• Updated kit now includes unique pressure limiting valve in-built to prevent extreme pressures building in test kit during engine cranking • Measures delivery pressure output from the CRD (Common Rail Diesel) High Pressure pump under engine cranking conditions • Cranking test to show a “healthy” 250+ Bar output, gauge reads up to 600 Bar. • High pressure test gauge allows direct connection to the high pressure pump, providing cranking pressure measurement of the pump • Electronic sensor tester reads and displays the high pressure signal from the actual high pressure sensor output point – allowing comparison to a code readers displayed data • M12 x 1.5 & M14 x 1.5 connections • Includes shaped high pressure connector pipes (x5) to cover many applications
314660V2 Common Rail Diesel (CRD) High Pressure Test Set • As per 314650V2 kit above excluding electronic sensor tester
314875V2 Fuel Injection Pressure Test Kit for Petrol Engine Vehicles
OFFER £299.95 SAVE £13.00
LIST PRICE £312.95
• Universal Injection Pressure Test Kit for modern Electronic, Multi-point injection systems • Now covers Alfa Romo, Fiat, Lancia and new Ford Ka vehicles • Shock protected, fuel resistant dual scale gauge – to 10bar / 145psi • Relief valve for safe depressurisation • Quick coupling adaptors and connectors • Includes shaped high pressure connector pipes (x5) to cover a wide range of applications
OFFER £369.95 SAVE £30.00
LIST PRICE £399.95
314860V2 Combined Fuel Injection Pressure Test Kit for Multi-Point & Single-Point Systems (Petrol) • Covers a wide range of both mechanical and electronic multi-point and single point fuel injection systems, to assist in the diagnosis of common fuel injection problems • Check faulty regulators and fuel pumps, diagnose blocked filters and fuel feed lines, identify leaking injectors & more!
31462000
OFFER £675.95 SAVE £20.00
Common Rail Diesel (CRD) Fuel Return Flow Kit
• Designed for use on the injector return side of a CRD system • Helps to diagnose: poor / no engine starting, poor engine running, poor acceleration / general lack of engine power • Supplied in plastic case and includes graduated acrylic measuring block for up to six cylinders, injector adaptor sets for Bosch / Delphi / Denso / Siemens, set of reduction pipes and hanging hook Suitable for solenoid injectors only
OFFER £169.95 SAVE £30.00
LIST PRICE £199.95
LIST PRICE £695.95
31461000 CRD Low Pressure Test Gauge Kit
• Measures low pressure feed from the fuel pump to the high pressure pump • Features brass fittings & heavy duty high pressure hose for longer life • Also measures fuel return pressure where necessary • Includes: - Shock protected, dual scale gauge to 10bar / 145psi - 8mm Standard System Connectors OFFER £247.95 - 10mm & Open System Connectors SAVE £30.00 LIST PRICE £277.95 - T-Connector & Tap Assembly
Note: Full product / application details for all kits featured on this page can be found on our website: www.sykes-pickavant.com
20
Tel: 01543 679900 www.sykes-pickavant.com
SUSPENSION 08780000 Universal Press & Pull Sleeve Kit - Car / LCV • Universal tool set for extracting and drawing-in of bushes, bearings, seals etc • Contains 20 x Press Sleeves in 2mm dia. steps • Inside Diameter Range: 34 - 72mm • Outside Diameter Range: 44 - 82mm
08785500
08786500
IDEAL FOR BALL JOINTS
XS Sleeve Kit - Basic
• For use as an add-on to the 08780000 kit to increase applications for smaller bushes and ball joints • Contains 10 x Press Sleeves in 2mm dia. steps • Inside Diameter Range: 14 - 32mm • Outside Diameter Range: 24 - 42mm
£379.00
£325.00
XS Sleeve Kit - Master
£249.00
• Stand alone kit for smaller bush applications • Contains 10 x Press Sleeves in 2mm diameter steps • Inside Diameter Range: 14 - 32mm • Outside Diameter Range: 24 - 42mm
Multi Thread Spindle Packs
• Suitable for use with the 0878 / 0879 Universal Press & Pull Sleeve Kits - as featured on this page • Generates greater power than standard spindles • Works with standard spindles and increases lifespan • Square profile heavy duty pulling thread • Large surface area roller bearing for greater delivery of power
08794000 Multi Thread Spindle Pack Contents: • Counter Nut: M10 / M12 / M14 • Nut TR20 with bearing • Spindle TR20 - Short & Long
£99.95
18780500 Universal C-Clamp
08794300 Multi Thread Spindle Pack - Short
08794600 Multi Thread Spindle Pack - Long
Contents: • As per kit 08794000 (left) excluding long spindle
Contents: • As per kit 08794000 (left) excluding short spindle
£65.95
£72.95
CAN BE USED WITH AN IMPACT GUN
NEW
• For the dismantling / installation of suspension components on the vehicle • Jaw opening: 245mm • Throat depth: 100mm • Includes adaptors for use with the 08780000 and XS Sleeve kits (above) • Designed to allow greater access in restricted situations and where the universal press frame is not suitable • Special ‘trapezoidal’ threaded screw, allows for the application of greater force • Base cup works with gold and silver rings from the SP press frame (18700100 / 187000V2) • Includes impact screw which can be removed and replaced OFFER £199.95 SAVE £50.00 with a hydraulic ram (1500 & 1800 LIST PRICE £249.95 Series)
21
NEW
08080000 Universal Suspension Arm Lever • For lowering of the suspension arm and the separation of suspension components • Uses leverage and the technicians’ own bodyweight to create the force required
OFFER £139.95 SAVE £60.00
LIST PRICE £199.95
IDEAL FOR PEUGEOT 206 LOWER ARMS
SPECIAL OFFERS FORD / VOLVO BUSH TOOL KIT
087304V2 Ford & Volvo Rear Wishbone / Trailing Arm Bush Tool Kit
OFFER £199.00
LIST: £395.00
Suitable for: Ford: Mondeo / Mondeo Estate ‘07-, S-Max & Galaxy ‘06Volvo: XC70 & V70 ‘07-, XC60 ‘08-, S60 & V60 ‘10-
UNIVERSAL WHEEL LOCK TOOL
08140000
OFFER £34.95
• Designed for locking the LIST: £64.95 front wheel hub whilst the vehicle is raised • 800mm length and suitable for use on stud sizes up to M17
VALVE SPRING COMPRESSOR
03950000 • For the removal of valves on multivalve petrol & diesel engines • Supplied with 25mm & 30mm adaptors
OFFER £49.95
LIST: £65.95
SONOSCOPE
32370000 • Super sensitive sound detector, with a built-in diaphragm which amplifies noise, for assisting in the diagnostic process
08090000
OFFER £39.95
• For the removal of CV LIST: £69.95 joints on front wheel drive cars • Avoids the need to remove the entire front axle • Approved as a special tool by VW Group Ref: T20181
THATCHAM BODY REPAIR TOOL KIT
058500TH • General purpose 13 piece set of Body Repair Tools approved by Thatcham™ for Insurance Approved Body Repair work
OFFER £259.95
OFFER £12.95
OFFER £19.95
• 4 piece set LIST: £39.95 • Sizes: 1/2 sq dr x M6, M8, M10, M12
LIST: £24.95
OFFER £24.95
• For OHC petrol & diesel LIST: £31.95 engines • Will also fit a wide variety of smaller OHV engines • Cam action provides parallel lift
04600000
OFFER £14.95
• For quick removal of LIST: £21.95 clips, fasteners, door trim panels, fascia supports, trim panels • Squeeze prevention pin • Length: 240mm
VALVE SPRING COMPRESSOR - OHV
66021000 • For the removal of valves on small / medium OHV engines • Cam action provides parallel lift • Automatic locking action
01370300 • Universal kit for modern front wheel drive vehicles with or without pilot / spigot bearings with flywheel fitting diameters from 12-20mm
OFFER £29.95
LIST: £49.95
FAST FIT MICRO PULLER
08215000
OFFER £43.95
LIST: £63.95
• For rapid removal of small bearings • Puller Spread Min-Max: 19 - 45mm • Puller Reacher Min-Max: 19 - 73mm
CONCENTRIC ROLLER STUD EXTRACTOR SET
66195000
CLUTCH ALIGNMENT TOOL KIT
LIST: £299.95
TRIM CLIP REMOVER AND PLIER
VALVE SPRING COMPRESSOR - OHC
66043000
CV JOINT PULLER
OFFER £24.95
LIST: £31.95
BODY REPAIR SET - STANDARD KIT
05800100 • General purpose panel beating kit containing 3 x panel beating hammers, 4 x dollies, 2 x spoons & body blade holder inc 1 blade • Supplied in steel tool box
OFFER £329.95
LIST: £359.95
HUB CLAMP SPREADER TOOL
08485000 • Spreads the steering knuckle to enable safe removal and assists re-assembly of shock absorbers, without risk of damage to the knuckle
OFFER £39.95
LIST: £69.95
SHEET METAL CUTTER
04210000 • Heavy duty roller type cutter suitable for straight, curved & angle cutting mild steel sheet metal up to 3.2mm thick (10SWG) • Includes bracket for safe bench mounting
OFFER £199.00
LIST: £279.95
Note: Full product / application details for all products featured on this page can be found on our website: www.sykes-pickavant.com
22
Tel: 01543 679900 www.sykes-pickavant.com
WORKSHOP EQUIPMENT 53403500
Fortron Injector Max Machine
BESTSELLER
Simple and effective method of cleaning both petrol and diesel fuel systems without the removal of injectors from the vehicle
INCLUD
ES:
INCLUD
ES:
Comprehensive adaptor set
Access to the Fortron-Zone forum
Share and gain knowledge
INCLUD
ES: D U L C N I
ES:
FREE leaflet dispenser & Injector Max leaflets
Listing on the Injector Max Garage Directory
As featured on our website
...PLUS PROMOTION OF YOUR BUSINESS VIA OUR
&
r Max service, “After having an Injecto it’s like driving a the motor is spot on it doesn’t go into different car now and nks again for Tha limp mode anymore! ” Mr W ice. serv star sorting the car EAC Telford - Shropshire
“I had an Injector Max treatment on my 8 year old 1.2 Honda Jazz and the car feels like new again. Acceleration is responsive and much more powerful in the low gears.The engine has discovered its quietness again and idle revs are back at 1,000.” Mr C
PAGES! INJECTOR MAX TESTIMONIALS “Had a Renault Scenic 1.6 petrol in for an Injector Max service. The customer noticed an improvement straight away and even called back a few days later to say that the MPG had increased from 21 to 39 and the car drives much smoother, so well worth the money.”
£1995.00 Fluid Accessories Part No.
Description
Price
53403600
RTG Premix Solvent - Petrol
£18.49
53403700
RTG Premix Solvent - Diesel
£18.49
53403800
Vactek Fluid Bottle
£11.99
53403900
Induction Service Kit - Petrol (Aerosol)
£11.99
53404000
Induction Service Kit - Diesel (Aeresol)
£17.49
53404300
Induction Service Kit - Petrol (Pouring Fluid)
£17.49
ALSO AVAILABLE: POS MATERIAL Posters / Banners / Signs
SMB Autocentre Cradley - West Midlands
Prestige Car Repairs - Oldham
Other Fortron fluid service machines also available. See page 18 for further details Sykes-Pickavant Ltd, Unit 4 Cannel Road, Burntwood Business Park, Burntwood, Staffordshire, WS7 3FU. United Kingdom Tel: +44 (0) 1543 679900 Fax: +44 (0) 1543 679901 e-mail: sales@sykes-pickavant.com www.sykes-pickavant.com ALL PRICES QUOTED EXCLUDE VAT & ARE SUBJECT TO AVAILABILITY - E&OE - PRICES VALID UNTIL 31ST MARCH 2016 - REF: SPQ116GBP COPYRIGHT 2016 - SYKES-PICKAVANT LTD. ALL RIGHTS RESERVED.
For further details, please contact Sykes-Pickavant and request an Injector Max POS flyer or scan the QR code:
Distributor Stamp: