U T E
+
C A N O P Y
Rhino-Rack ute and canopy systems can be customised to suit varying floor pan profiles and cabin heights. The high quality structural aluminium ute post uprights can easily be cut to match an existing roof bar over the cabin. This system incorporates Heavy Duty Rhino-Rack crossbars, enabling the user to customise the system with the full range of Rhino-Rack accessories. Utility uprights are available in several lengths, check with your authorised dealer to ensure correct upright and crossbar specifications.
RTRL Adapter Part# RTRL The RTRL adapter is the answer to attaching a guttermount leg to all Rhino standard Track Mount systems. Made from stainless steel, the RTRL offers you a flexible and universal mounting system to suit all Rhino tracks. The RTRL lets you level all 3 bars on a vehicle fitted with a canopy by utilising the different heights available in our existing Rhino gutter mount leg range and mounting them into tracks on the vehicle cabin. JB Spacer/Height Adjuster Part# RLK2500HALF-JB The removable RLK2500HALF-JB allows you to set the height of your ute cabin mounted support bar so it’s level with your ute’s rear mounted posts or canopy racks. The RLK2500HALF-JB + cross bar is for supporting long loads only and must be used in conjunction with 2 x rear ute posts or canopy racks. Supplied with hardware to fit a single Rhino-Rack Heavy Duty bar, it will also fit an Aero bar with the addition of the Aero bar adaptor kit part# CBPK-AERO Canopy Seal Angled Part# CANSA With the changing shape of canopies on the market, especially where in a lot of the cases the front of the canopy (just behind the cab) seemed to slope away, there is a need to seal the post on varying angles. Rhino-Rack have developed a specifically designed canopy seal to alleviate the hard task of sealing the canopy around the post on an angled surface.
18