209
tixocem® floor & wall thinset mortar Use for setting: Ceramic and quarry tile; natural stone tiles and slabs (with the exception of moisture-sensitive stone); setting tile on cementitious floors with in-floor heating systems, and tiling in swimming pools. For the installation of: Suitable building boards, e.g. gypsum drywall and cement backerboard, insulation boards made of rigid foam, and installation of ceiling and sound insulation panels. Description: Portland cement-based modified mortar with powdered polymers for good bond strength and flexibility. When mixed with water, the result is a creamy, smooth thinset mortar that hardens by hydration and drying, is highly flexible, and water and weather resistant. butech® tixocem® floor & wall thinset mortar bonds to all typical substrates to include concrete, masonry, and cementitious surfaces. butech® tixocem® floor & wall thinset mortar can also be used to install tile on interior substrates only. Notes: When setting certain types of tiles, it may be necessary to trowel a layer of mortar on the back of each tile prior to placing in the combed mortar bed in order to achieve the required mortar-to-tile contact specified. Press tile firmly into the freshly combed mortar bed to insure maximum mortar contact. butech® recommends the installation of test areas to confirm the suitability of the product for the intended use. butech® tixocem® floor & wall thinset mortar must be worked at temperatures over 50°F (10°C).
super-one® marble thinset mortar Use for setting: Ceramic and natural stone tiles and slabs (including mosaics, pavers, granite, marble, and all types of natural gauged stones). For the installation of: Suitable building boards, e.g. gypsum drywall and cement backerboard, insulation boards made of rigid foam, and installation of ceiling and sound insulation panels. Description: Non-staining, self-drying, white Portland cement-based thin set mortar for setting floor and wall tiles in indoor applications. Due to its exclusive self-drying Portland cement-based matrix and fast setting properties, butech® super-one® marble thinset mortar will not contribute moisture to the tile, making it particularly suited for use with moisture-sensitive stones such as marble, granite, limestone, etc. butech® super-one® marble thinset mortar bonds to all interior concrete, masonry, and cementitious substrates. butech® super-one® marble thinset mortar can also be used to install tile on Type 1 exterior grade plywood on interior substrates only. Notes: When setting certain types of tiles, it may be necessary to trowel a layer of mortar on the back of each tile prior to placing in the combed mortar bed in order to achieve the required mortar-to-tile contact specified. Press tile firmly into the freshly combed mortar bed to insure maximum mortar contact. butech® recommends the installation of test areas to confirm the suitability of the product for the intended use. butech® super-one® marble thinset mortar must be worked at temperatures over 50°F (10°C).