Experience the tank system The eGo-T builds on the achievements of the eGo. It is the first e-cigarette to apply the new tank system for dripping e-liquid directly into its 1.2 ml tank cartridge without the use of tissue inside the tank. This revolutionary new e-cigarette makes dripping easier and less frustrating for consumers. Now you can simply pre-fill extra tank cartridges and take them around with you to use as needed throughout the day.
What’s inside the kit Inside the eGo-T kits you will find the following items: one Normal Tank Atomizer, one Tawa Tank Atomizer , two 650 mAh batteries, one USB charger, one USB wall charger, one Pouch, seven empty Tank Cartridge, one instruction Manual. ※There are seven empty tank cartridges inside the eGo-T kit. Five are sealed in plastic containers and two are placed in the normal atomizer and the TAWA atomizer.
Opening the kit When you first open the eGo-T kit, you should find all of the above items inside the kit. You may also notice some liquids coming from the atomizer. Do not worry. This is normal. The liquid is simply e-liquids left inside the atomizer from the testing process at the factory. Before each atomizer leaves the factory, it is tested several times to ensure it is up to standard and vapes. After the testing process, the liquid is left inside to keep the atomizer chamber moist. This helps to preserve the atomizer during storage. This liquid can sometimes seep out during shipping. Please don’t worry, this is normal. Simply wipe off the e-liquid and use as described in the manual.
The eGo-T electronic cigarette The eGo-T electronic cigarette is composed of tank cartridge for storing e-liquid, a tank atomizer to change the e-liquid into a vapor and a battery to provide power. It gives a realistic feel and taste of a traditional cigarette. Before using the eGo-T, you must assemble it correctly. You will need the following components to assemble it: The tank cartridge, the atomizer and the battery. • Please charge battery fully before assembling. (see battery section before charging your battery) • Remember the eGo-T is an electronic equipment; please assemble in a clean environment free of dust.
First, screw battery compartment clockwise into the hole on the atomizer. Next, fill the tank cartridge with e-liquid as described in the Tank Cartridge section of this manual and gently push the Tank cartridge into the atomizer. Forcing Cartridge into the atomizer may cause damage. Do Not Force Cartridge. You should feel a slight give as the atomizer needle pierces the seal at the tip of the cartridge. The eGo-T is now ready for use.
Tank Cartridges Atomizer Battery