BECKHOFF New Automation Technology
Building Automation
Beckhoff | Intelligent Building Automation
PC-based control technology from Beckhoff, which has already been used successfully for almost three decades in all areas of industrial automation, has become an integral component of intelligent building automation. The demands on the intelligence of buildings have increased constantly in recent years, such that the energy efficiency as well as a good “return on investment” is the priority. The idea of a “green building” based on sustainable, energy-efficient construction and building use can be realised with intelligent, integral building automation. Beckhoff offers a universal, scalable building automation control system covering PC- and Ethernetbased controllers and a modular I/O system for logging all data points in buildings.
In the Beckhoff I/O system, an extensive range of Bus Terminals is available to building technicians for connect the sensor and actuator systems. This provides the freedom to assemble the modules required for the application as if from a construction kit. On top of that, the fine granularity of the terminals permits precise tailoring of the I/O level to actual needs; i.e. only that which is actually needed must be purchased. The core of the intelligent building control is the Beckhoff Industrial PC with TwinCAT automation software. For all areas of application, from the small controller to automate a single room or a certain building zone up
2
BECKHOFF New Automation Technology
to a high-performance computer for the control of a large HVAC system, Beckhoff offers a scalable product range from which the building technician can choose. The free programmability of the controller is extremely helpful in the realisation of very complex tasks. Comprehensive software libraries that were specially developed for building automation and simplify and optimise software engineering round off the Beckhoff portfolio. Object-oriented function blocks ensure good readability and expandability of the user programs. In addition, they guarantee high system functionality and reusability of templates.
3
Openness is another advantage of the Beckhoff platform for building automation. The standardised communication protocols BACnet/IP, OPC-UA and Modbus-TCP facilitate integration of Industrial PCs in existing systems. All common fieldbus systems used in building automation, including LON, EIB, DALI and MP-Bus, can be integrated in the control system via intelligent Bus Terminals. PC-based control technology from Beckhoff offers a high potential for the optimisation of energy efficiency in buildings. The Beckhoff solution already makes building automation of energy efficiency class A according to DIN EN 15232 possible today. Solutions for consumption data acquisition “from the I/O Bus Terminal to the ERP system� as well as solutions for energy optimisation, for example, in computer centres, round off the range of offers.
www.
4
beckhoff.com/building
Advantages of integrated building automation Investors – – –
– –
universal solution based on a transparent automation system central data management added value through integration of all services in a single system and utilisation of synergy effects for energy saving The payback time for integrated automation is approx. five years. Extension and modification of the system in order to adapt it to changing technical requirements is straightforward over the whole life cycle.
Architects and planners –
– –
IP-based network configuration facilitates integration of the automation system into the building infrastructure already during the design phase. free choice of topology, depending on the requirements in a particular building Integrated design is simplified through flexible application of input/output modules, independent of the control system and function.
System integrators –
– – –
Reduction of the number of actual physical data points reduces the potential for errors during installation and commissioning. transparent access to the whole system for display/processing of parameters simplified maintenance and optimisation of the system seamless integration of room automation with the primary systems
5
BECKHOFF New Automation Technology
Beckhoff Building Automation | The integrated building automa
Lighting
HVAC
Room automation
Facade
The functionalities are integrated based on a holistic building automation concept so that all the benefits with regard to integration of the automation, minimisation of capital cost, optimisation of maintenance and increased energy efficiency can be utilised. Maximum flexibility PC-based control technology enables all building functions and function changes to be realised based on software. This means maximum flexibility and low engineering costs. The comprehensive TwinCAT building libraries cover all main building functions. 6
BECKHOFF New Automation Technology
We reserve the right to make technical changes.
tion concept
Remote maintenance
Logging of energy data
Scalable control technology The scalable, modular control system from Beckhoff offers the right solution for any task, from the high-performance Industrial PC or Embedded PC as main building computer up to local Ethernet controllers.
Operating and monitoring
Home automation
Modular automation components The Beckhoff Bus Terminal system for connection of data points features 400 different I/O terminals and supports all common sensors and actuators.
7
We reserve the right to make technical changes.
BECKHOFF New Automation Technology
Beckhoff Building Automation | Lighting
Both natural and artificial light have a significant influence on the well-being of humans. Suitable lighting can have a positive effect on consumption behaviour and work performance. Lighting is therefore becoming increasingly important as a building automation parameter. In addition to the right choice of lamps and fittings, another important aspect is the control of different lighting scenarios.
8
BECKHOFF New Automation Technology
We reserve the right to make technical changes.
Beckhoff offers a wide range of products for lighting control: – universal dimmers KL2751 (300 VA) and KL2761 (600 VA) for controlling ohmic, inductive or capacitive loads, automatic load detection and calculation of the correct phase control angle – light switching: KL2602 (loads up to 5 A AC/DC ohmic and 2 A AC/DC inductive); KM2614 (with integrated manual operation) and KM2604 (up to 16 A per output)
–
–
KL2512 for switching or dimming of negative switching 24 V DC LEDs via PWM The DALI master terminal KL6811 offers benefits in relation to cabling effort and diagnostic options. The terminal is controlled through the building automation software library DALI/DSI V2, based on the DALI standard (IEC 60929). The library contains expansion commands for discharge lamps and emergency lighting.
–
–
DMX master EL6851 for controlling of facade or effect lighting; DMX slave EL6851-0010 for integration in stage lighting. The terminals are integrated via EtherCAT. The TwinCAT PLC Building Automation software library offers comprehensive lighting control function blocks such as constant light control.
Ethernet
DALI LED
2A
16 A
DMX
9
We reserve the right to make technical changes.
BECKHOFF New Automation Technology
Beckhoff Building Automation | HVAC
The tightening of energy saving regulations for buildings over recent years led to increasing demands and complexity in HVAC control software. The Beckhoff HVAC library offers system integrators a software tool that covers the whole functionality of HVAC control systems. It includes ready-made software components for energy saving functions such as summer night cooling, summer compensation, cool down protection, time schedulers and much more.
10
BECKHOFF New Automation Technology
We reserve the right to make technical changes.
The software library offers the following benefits for programmers during system setup and for system operators during routine operation: – efficient parameterisation and commissioning – consistently high system functionality
–
–
–
transparency of programs (prerequisite for long-term maintainability and expandability of the systems) improved reusability of templates for systems or system components straightforward familiarisation of service staff
– –
–
uncomplicated extension of existing systems clear, object-oriented structure for creating visualisation objects in HMI and SCADA systems good documentability of the programs
Ethernet
T
T
T P
T
T
Room 11
We reserve the right to make technical changes.
BECKHOFF New Automation Technology
Beckhoff Building Automation | Room automation
Integrated room automation covering different functionalities is the key to efficient building operation and well-being of the users and offers significant savings potential. Intelligent linking of the individual physical data points reduces not only their number and error-proneness, but also energy consumption. This leads to significant cost reduction during the construction phase and during operation.
12
BECKHOFF New Automation Technology
We reserve the right to make technical changes.
Communication between the individual automation stations takes place via Ethernet TCP/IP. The degree of automation of a particular room can be individually adapted through custom configuration of the Bus Terminals. Alternatively, the BC9191 room controller integrates these functions in a module. Rooms or areas with repeating requirements only have to be programmed once. The program template can then be copied as required and enables integrated, efficient room automation based on energy efficiency classes.
Energy efficiency classes regarding DIN EN 15232 Function
D C B A
Function
Evaluation of occupancy
x x
Setpoint calculation
Scheduler
x x
Feature selection
Light switching
D C B A x x x x
Room temperature
x
x x x
Automatic lighting
x x
control (heating/cooling)
Daylight-dependent
x x
Room/supply air tempera-
Constant light control Sunscreen automatic
x x
ture cascade control
lighting x x x
Fan control
x x
Sequence control
x x x x
Lamella setpoint tracing
x x
Setpoint limitation
Blind correction
x x
Air quality control
Thermoautomatic
x x
Night cooling
x x
Selection of energy level
x x
Load optimisation
x x
Selection of energy level
x x
x
with start optimisation
Ethernet, ADS, Modbus TCP, BACnet/IP, OPC-UA
Lighting
Cooling
Lighting 13
We reserve the right to make technical changes.
BECKHOFF New Automation Technology
Beckhoff Building Automation | Facade
Building facades have to meet a wide range of demands. The architectural design primarily focuses on aesthetic aspects. After all, the facade determines the visual appearance of a building. From an engineering point of view, the facade also has to meet thermal insulation, glare protection and safety requirements.
14
BECKHOFF New Automation Technology
We reserve the right to make technical changes.
Drives for blinds and other shading devices are controlled via digital output terminals such as KL2722 or KL2602. Shading can reduce heating or cooling performance through integration into the room automation. Combination with lighting control offers further scope for energy optimisation.
Window contacts connected via digital input terminals such as the KL1404 are used for controlling the heating or cooling system and send information on the security status of the building to the control level. Electric window drives can be used to optimise air quality, for summer night cooling and for smoke extraction.
Integration of weather data can be realised via serial or analog interfaces or via web services, depending on the degree of automation. This way, the facade is protected from wind and frost. Comprehensive function blocks from the “Building Automation” and “HVAC” software libraries round off the range of applications.
Ethernet
15
We reserve the right to make technical changes.
BECKHOFF New Automation Technology
Beckhoff Building Automation | Remote maintenance
Due to the complexity of the tasks involved, automation of buildings and properties requires access via remote diagnostics, maintenance and control. Swift support from specialists is a prerequisite for troubleshooting, software maintenance and installation of updates in order to avoid unnecessary costs and failures. Information about process parameters is required for building operation and system optimisation. Warning and error messages can be sent to service staff via SMS or e-mail.
16
BECKHOFF New Automation Technology
We reserve the right to make technical changes.
Diagnostics and Services – networking via cable (analog, ISDN, DSL, …) or mobile communication (GSM, EDGE, UMTS, …) – availability of familiar Internet technologies such as FTP, HTML, AJAX, SOAP, WCF, REST, WebService or Silverlight through the use of PC-based automation technology – IEC 60870-S-101, IEC 60870-S103 and IEC 60870-S-104 telecontrol protocols are supported.
Remote control – Service staff can be notified directly from the control system via SMS or e-mail. – Remote desktop applications or Team-Viewer enable the whole computer to be controlled via the Internet or Intranet, even over large distances. – monitoring and operation via HTML pages stored directly in the control system – dynamic display of content via AJAX and Silverlight
Remote programming – full access to the control system for changing the system configuration and the control program – VPN routers offer safe and costeffective access via Internet/ Intranet or mobile communication.
Ethernet
ADS, OPC, Ethernet, Serial, USB, Bluetooth, Fieldbus, WiFi, WLAN
17
We reserve the right to make technical changes.
BECKHOFF New Automation Technology
Beckhoff Building Automation | Logging of energy data
Due to rising running costs and increasingly centralised management of buildings, computer centres and properties, demand for energy and consumption data monitoring is increasing. Through the combination of PC technology and Bus Terminal components Beckhoff offers an ideal platform for realising these tasks. Seamless integration of energy and consumption data monitoring for all building functions into the automation system results in savings potential and synergy effects during system installation and building operation.
18
BECKHOFF New Automation Technology
We reserve the right to make technical changes.
Solutions for logging of energy data In conjunction with current transformers, the 3-phase KL3403 power measurement terminal enables measurement of all relevant electrical data and offers comprehensive network analysis for the building automation system. A function block from the HVAC software library measures RMS values of current and voltage, effective, apparent and reactive power, cos φ, etc.
In many cases, electricity meters provide data in the form of pulse signals. Here too, the Bus Terminal range offers a wide range of sampling options. The type and duration of the pulse is decisive for the selection of the correct Bus Terminal: – The KL140x has a 3 ms input filter. – The KL1232 extends very short pulses to 100 ms; the input filter is 0.2 ms. – The KL1512 is an up/down counter with an input filter of 0.2 ms.
The pulses are processed based on standard function blocks such as trigger and counter. M-Bus counters can be connected via level converters to a serial interface. TwinCAT offers a software library with function blocks for common M-Bus counters. The KL3681 multimeter terminal can be used to measure currents and voltages directly in the control system. The TwinCAT Scope enables curve display in real-time.
Ethernet
Current
Gas
Water
19
We reserve the right to make technical changes.
BECKHOFF New Automation Technology
Beckhoff Building Automation | Operating and monitoring
Process operating and monitoring are key functions in building automation. The specific requirements vary depending on the building type and function, and the building management, automation and field levels deal with a wide range of different tasks. Standard technologies such as Ethernet TCP/IP enable unrestricted system-wide access to all devices.
20
BECKHOFF New Automation Technology
We reserve the right to make technical changes.
Building management (management level) Based on standard PC and IT technology as operating and monitoring platform, the control system is able to meet the requirements of any SCADA system. A comprehensive range of IPCs with remote DVI/USB panels or Panel PCs, optionally with or without touch display, is available as hardware platform. Beckhoff offers standard communication interfaces to match any SCADA system.
Local plant operation (automation level) Control Panels with touch display and/or integrated keyboard enable to access local system components. The use of Ethernet Panels/Embedded PCs enables web-based control via the integrated web server. PLC and the visualisation can run on the same device. Room control (field level) The control system is precisely adapted to the requirements at the field level. Control Panels with touch display between 5.7” and 24” are available. Commercially available operating
devices can be integrated via standard interfaces. – connection of switches and sensors via 24 V DC or 230 V AC – integration of compact room control units via EIB, LON, Modbus TCP, Modbus RTU – connection of radio equipment via EnOcean Beckhoff offers a comprehensive hardware portfolio in the form of Bus Terminals and PC interfaces for integrating sensors and actuators. Software libraries for EIB, LON, Modbus, EnOcean and serial communication round off the portfolio.
Ethernet
21
We reserve the right to make technical changes.
BECKHOFF New Automation Technology
Beckhoff Building Automation | Home automation
Similar to the automation found in larger buildings, all data points required for home automation are connected directly to the Beckhoff Bus Terminal system. A wide range of different Bus Terminals enables integration of all sensors and actuators for lighting control, energy consumption metering and garden irrigation, for example, as a function of data from a weather station.
22
BECKHOFF New Automation Technology
We reserve the right to make technical changes.
Local I/O stations distributed throughout the home are networked with the central Embedded DIN rail PC via Ethernet. The standard Ethernet network is used for PCs, telephones, home entertainment and building control tasks.
Building control functions can be displayed and operated via Beckhoff Control Panels with touch screen distributed throughout the house. Building status messages can be retrieved via SMS, video, voice or e-mail.
On the software side, TwinCAT automation software is the core of the home automation system. It can be used to configure a wide range of building functions.
Ethernet
DALI
23
We reserve the right to make technical changes.
BECKHOFF New Automation Technology
24
References
Beckhoff Building Automation enables the simple integration of IT and automation worlds in the control of industrial and office buildings. The product range consists of a universal, scalable, modular control system that offers suitable solutions for any task: from powerful Industrial PCs as building computers to local Ethernet controllers that record and pre-process signals directly and locally. Ethernet as a universal communication system connects the data worlds of office and building automation. Our partners realise numerous objects worldwide on the basis of this control platform. The following selection of example solutions illustrates that there are no limits, from the automation of individual systems to fully integrated building automation.
25
BECKHOFF New Automation Technology
Microsoft, Cologne, Germany
26
Sch端co Technology Center, Bielefeld, Germany
BECKHOFF New Automation Technology
Eurotheum (European Central Bank), Frankfurt, Germany We reserve the right to make technical changes.
References | Office buildings
Microsoft, Unterschleißheim near Munich, Germany
Allianz head office, Stuttgart, Germany
KölnTriangle, Cologne, Germany
WesBank, Johannesburg, South Africa
Other references |
BSH Bosch und Siemens Hausgeräte GmbH at “Aviva”, Munich, Germany
|
Office building “Esplanade” Theresienhöhe, Munich, Germany
|
Fortis Bank, Brussels, Hasselt, Belgium
|
Park Gate, Munich, Germany
|
Westpac headquarters, Sydney, Australia
www. We reserve the right to make technical changes.
beckhoff.com/building
BECKHOFF New Automation Technology
27
dSPACE, Paderborn, Germany
28
Miele innovation centre for electronics development, G端tersloh, Germany
BECKHOFF New Automation Technology
We reserve the right to make technical changes.
References | Industrial buildings
AMAG Automotive, Buch, Switzerland
F-eins, Vienna, Austria
Other references |
Broschek Tiefdruck, Hamburg, Germany
|
Liebherr Werk, Nenzig, Austria
|
SOLON SE, Berlin, Germany
|
Daimler, Stuttgart, Germany
|
Philip Morris International, Lausanne, Switzerland
|
ZF-Lemfรถrder Fahrwerktechnik, Dielingen, Germany
|
Heroal, Verl, Germany
www. We reserve the right to make technical changes.
beckhoff.com/building
BECKHOFF New Automation Technology
29
Dolder Grand Hotel, Zurich, Switzerland
30
Tschuggen Bergoase, Arosa, Switzerland
BECKHOFF New Automation Technology
Aqua-Dom Hotel, Berlin, Germany
We reserve the right to make technical changes.
References | Hotels
Hotel Aurelio, Lech, Austria
Holiday Inn, Samara, Russia
CitizenM Hotel, Amsterdam, Netherlands
Hotel Sonne, Mellau, Austria
Hotel Krallerhof, Leogang, Austria
Other references |
Grand Tirolia, Kitzb端hel, Austria
|
Hotel Rasmushof, Kitzb端hel, Austria
|
St. Martins Therme, Frauenkirchen, Austria
|
Hotel Aviva, St. Stefan am Walde, Austria
|
Leonardo Royal Hotel, Munich, Germany
|
Therme Laa, Laa an der Thaya, Austria
|
Royal Spa Kitzb端hel, Austria
www. We reserve the right to make technical changes.
beckhoff.com/building
BECKHOFF New Automation Technology
31
CarrĂŠ Theatre, Amsterdam, Netherlands
32
Deutsches Museum, Munich, Germany
BECKHOFF New Automation Technology
We reserve the right to make technical changes.
References | Theatres and museums
Scala di Milano, Milan, Italy
Charlottenburg Palace, Berlin, Germany
Other references |
Dresdner Stadtmuseum, Dresden, Germany
|
Gran Casino Aranjuez, Madrid, Spain
|
Ronacher Theater, Vienna, Austria
www. We reserve the right to make technical changes.
beckhoff.com/building
BECKHOFF New Automation Technology
33
ESPRIT arena, D端sseldorf, Germany
Other references
34
|
Allianz Arena, Munich, Germany
|
AUA Training Center, Schwechat, Austria
|
Europlaza, Vienna, Austria
BKN Strobel, Holm, Germany
BECKHOFF New Automation Technology
We reserve the right to make technical changes.
References | Infrastructure
Amsec, Hagenberg, Austria
Smart Tower, Kehl-Bodersweier, Germany
Oncological Center, Samara, Russia
Zentrum Zukunft, Emstek, Germany
|
Ferry Porsche Congress Center, Zell am See, Austria
|
Nordtangente (ring road north), Basel, Switzerland
|
University of Zurich, Switzerland
|
Lufthansa Training Center, Schwechat, Austria
|
Stadtwerke Lingen, Germany
|
Zigong City Tower, Zigong, China
|
Metro M2, Lausanne, Switzerland
|
Steelworks, Bremen, Germany
www. We reserve the right to make technical changes.
beckhoff.com/building
BECKHOFF New Automation Technology
35
36
Beckhoff | Products and application examples
The PC- and Ethernet-based control solution from Beckhoff is ideally suited for building automation due to its open interfaces based on IT and Windows standards. With the resolute application of Ethernet from the sensor/actuator level via the PC level to the management level, all building users share a common data network. This means, for example, that intelligent components such as operating panels can communicate directly with the higher-level PC controller via the network cabling. The Beckhoff Bus Terminal system for the interfacing of data points not only supports all common sensors and actuators, but also integrates all main bus systems via corresponding Bus Coupler types. With over 400 different Bus Terminals, Beckhoff offers the right technology for all data points. The retrofitting of building functions is greatly simplified with the Bus Terminals. Subordinate subsystems such as EIB, LON, DALI, MP-Bus, M-Bus or RS232/RS485 serial interfaces can be integrated via communication Bus Terminals.
37
BECKHOFF New Automation Technology
Beckhoff | Open control architecture
Management level
Master computer
FMS
ERP
Field level
Analog input
Analog output
Analog input
Analog output
Digital output
Embedded PC, Bus Terminals
Digital input
Automation level
Digital output
Digital input
Ethernet, ADS, BACnet/IP, OPC-UA, Modbus TCP, PROFINET
Bus Coupler, Bus Terminals
38
BECKHOFF New Automation Technology
We reserve the right to make technical changes.
Analog I/O
Digital I/O
DMX
CANopen
PROFINET
PROFIBUS
Analog I/O
Digital I/O
DALI
MP-Bus
Modbus
RS232/RS485
Analog I/O
PROFIBUS
Digital I/O
Panel PC
Bus Coupler, Terminals
Embedded PC, Bus Terminals
Embedded PC, EtherCAT Terminals
Bus Coupler, Terminals
Bus Terminal Controller, Bus Terminals
Embedded PC, Bus Terminals
EnOcean
M-Bus
LON
EIB
Analog I/O
Digital I/O
Analog I/O
Digital I/O
Ethernet Panel
Bus Coupler, Bus Terminals 39
We reserve the right to make technical changes.
BECKHOFF New Automation Technology
Beckhoff | Scalable control technology
Beckhoff offers a scalable, modular control system that provides suitable solutions for any task in terms of computing power, complexity and costs. Irrespective of their performance
➔ Industrial PC
class, all Beckhoff controllers are programmed using the IEC 61131-3 standard programming languages via TwinCAT automation software.
➔ Embedded PC
➔ Embedded PC
➔ Bus Terminal Controller
40
We reserve the right to make technical changes.
Master computer Industrial PCs from Beckhoff represent the most powerful hardware platform for PC-based control systems for the management and automation level in building automation applications. The PCs feature industrial design and are equipped with top-performance components. They are based on open IT and automation standards. A wide range of types and individual case designs enable optimum adaptation to the specific control requirements. In contrast to standard DDC technology, the system is not limited through fixed data point specifications for individual control.
Zone and floor controller The Embedded PCs from the CX series are suitable for integral room automation, as floor controllers and for control tasks at automation level. – combination of PLC, I/O connection and visualisation – scalable performance – compact design – DIN rail mounting – flexible expandability by the addition of PC and fieldbus interfaces as well as I/O components Small local controller The Bus Terminal Controllers are suitable for use as zone controllers and for building areas in which a robust small controller is required. – programmable IEC 61131-3 controller – K-bus interface for connecting Beckhoff Bus Terminals – direct wiring of sensors and actuators – exchange of pre-processed data with the higher-level controller via the fieldbus Universal software for all areas of application The TwinCAT software system is a versatile programming tool for all automation levels. – integration of real-time control, multi PLC and programming environment – executable under Windows NT/2000/XP/Vista, Windows 7, NT Embedded, Embedded Standard and CE – connectivity to all popular fieldbuses and PC interfaces – use of open standards, such as OPC, OCX, DLL, etc. – software PLC compliant with the IEC 61131-3 standard with up to 4 runtime systems per PC and short cycle times starting from 50 µs – efficient software engineering using software libraries for building automation – high readability and expandability of the user programs by object-orientated function blocks
We reserve the right to make technical changes.
BECKHOFF New Automation Technology
41
Beckhoff | Bus Terminals – The complete I/O system
Ethernet
The Beckhoff Bus Terminal system supports all common sensors and actuators with 400 different I/O terminals.
Bus Coupler series BK, the link between Bus Terminals and fieldbus
Head station of the Bus Terminals: Bus Couplers, Bus Terminal Controllers or Embedded PCs
Potential feed terminals for the configuration of different potential groups
Digital multimeter terminal for the direct measurement of current and voltage
Bus Terminal Controller series BC with integrated IEC 61131-3 PLC
Embedded PC series CX with integrated fieldbus slave
42
Bus Terminals in 1-, 2-, 4-, 8and 16-channel modularity with mixing of any signal type; HD (High-Density) Bus Terminals with 16 connection points in a 12 mm housing for reducing space requirements and costs
Universal dimmer terminals with automatic load detection for control of brightness values independent of the fieldbus
3-phase power measurement terminal for the measurement of all relevant electrical data of the supply network
Embedded PC series CX for PLC and Motion Control applications
BECKHOFF New Automation Technology
We reserve the right to make technical changes.
Bus Terminals with a maximum measuring error of Âą0.01% extend the range of applications to high-precision measurement technology.
Pressure measuring terminals for the measurement of differential and absolute pressures
TwinSAFE Bus Terminals for the connection of all common safety sensors and actuators
Communication terminals for the integration of subsystems such as EIB, LON, DALI or RS232
More efficient manual/ emergency operation using Bus Terminals: switch or potentiometer in Bus Terminal format for process data change independent of the controller
EnOcean master for receiving or sending signals via radio transmission
Bus end terminal
Terminal bus extension for the connection of up to 255 (instead of 64) Bus Terminals to a station
43
We reserve the right to make technical changes.
BECKHOFF New Automation Technology
Beckhoff | Bus Terminals – Application examples
KL2751/KL2761 (dimming) Dimmer terminals for the direct connection of lights with different loads (up to 600 VA); output protected against short circuit and overload
KL2512 (LED) Output terminal for the direct connection of ohmic loads. The output signal is a pulse-width modulated voltage.
KL3208-0010 (temperature measurement) Analog input terminal for the direct connection of 8 resistance sensors in two-wire technique
KM1644 (4-channel manual operation) The digital KM1644 input terminal is used for manual input directly in the process data. The 4 switches supply their status to the control system as digital bit information. The four
KL6811 (DALI) DALI master terminal for the control of electronic operating devices, such as fluorescent lamps, emergency lighting, occupancy sensors or brightness sensors
–
LEDs indicate the four output bits from the process data and cannot be activated directly via the switches.
KM2642 (relay with manual/automatic operation) Digital output terminal with two independent relay changeover contacts for switching mains current consumers (230 V AC, 6 A); changeover between automatic and manual operation via integrated switch
– –
flexible lighting control for changing conditions, e.g. changes in room layout connection of up to 64 DALI slaves integrated 24 V DC power supply unit
HVAC
Lighting
Ethernet
44
BECKHOFF New Automation Technology
We reserve the right to make technical changes.
KM4602 (manual/automatic operation) Analog output terminal with two potentialfree 0 to 10 V outputs; changeover between automatic and manual operation via integrated switch
EL6851/EL6851-0010 (EtherCAT DMX master/slave) EL6851 DMX master terminal: – connection of max. 32 devices without repeater – transmission of up to 512 bytes of data
–
use of the RDM (Remote Device Management) protocol EL6851-0010 DMX slave terminal: – reception of up to 64 bytes of data
–
start address and data length adjustable via CoE objects (CAN application protocol over EtherCAT) The DMX slave receives data from the DMX master and makes it available to the application via EtherCAT.
KL2602 (switching) 2-channel relay output terminal with a single contact per relay for switching mains voltage consumers up to 230 V AC
KL6771 (MP-Bus master terminal) MP-Bus terminal for the direct connection of up to 8 MP-Bus devices and 8 sensors; commissioning or configuration via IEC 61131-3 function blocks
KL4404 (constant actuators) Analog output terminal generates signals within a range of 0 to 10 V; suitable for the control of constant actuators such as valves.
KL3464 (analog input) Analog input terminal processes signals within the range of 0 to 10 V; suitable e.g. for the connection of potentiometers, weather stations, etc.
KM3701/KM3712 (pressure measurement) The KM3701 measures pressure differences between two hose connections. The KM3712 measures two negative pressure values at the hose connections.
45
We reserve the right to make technical changes.
BECKHOFF New Automation Technology
Beckhoff | Bus Terminals – Application examples
Logging of energy data
Communication
Ethernet
KL6301 (EIB Bus Terminal) The EIB Bus Terminal supports up to 256 group addresses. With up to 8 filters, it allows the definition of the telegrams relevant to the Beckhoff controller; maximum length per filter: 64 subgroups.
KL6401 (LON Bus Terminal) The LON Bus Terminal supports 170 SNVTs (Standard Network Variable Types), which are arbitrarily adjustable. 62 SNVTs can be configured per terminal.
KL6001/31, KL6021/41 (serial communication RS232/RS485) Bus Terminals for the connection of devices with serial interface, e.g.: – displays – modem connection for remote maintenance or diagnostics – connection of M-bus devices
KL6581, KL6583/ KL6021-0023, KL6023 (EnOcean) KL6583 for transmitting and receiving EnOcean telegrams; KL6581 for the connection of up to 8 KL6583 modules; KL6021-0023 for receiving EnOcean telegrams; KL6023 wireless adapter
KL1501 (counter) Bus Terminal for counting binary pulses – switchable between upward and downward counting
–
KL3403 (energy measurement) Bus Terminal for the measurement of all relevant electrical data of the mains supply
KL3681 (digital multimeter) Bus Terminal for measuring currents and voltages; read-out and further processing of the measured values with conventional fieldbuses
–
triggerable via the gate connection implementation of two counters (16 bits) via the Clock1 input
46
BECKHOFF New Automation Technology
We reserve the right to make technical changes.
Facade
KL2722 (blind) The output terminal uses a power switch to control mains voltage from 12 V to 230 V; direct connection of AC blind motors with reversal of the direction of rotation is possible.
Digital input
Digital output
General
KL1362 (break-in sensors) The digital input terminal analyses the input signals of break-in sensors with the aid of a current loop. Alarm contacts with a fixed resistance ratio are monitored safely.
KL/EL/KM1xxx Digital inputs from 5 V DC to 230 V AC, e.g. for the connection of motion detectors, buttons, window and door contacts, occupancy sensors, etc.
KL/EL/KM2xxx Digital outputs from 5 V DC to 230 V AC, 16 A, e.g. for switching and controlling lighting, valves, fans, pumps, power sockets, etc.
KL2542 (DC motor) Bus Terminal for the direct operation of two DC motors – specification of speed or position of the automation device via a 16-bit value
Analog input
KL/EL/KM3xxx Analog inputs from 0 to 10 V and 4 to 20 mA up to resistance measurement, e.g. for the connection of weather stations, temperature sensors, air quality sensors, etc.
–
output stage protected against overload and short circuit
Analog output
KL/EL/KM4xxx Analog outputs from 0 to 10 V up to 4 to 20 mA, for controlling constantly controlled valves, ventilation flaps, speed controlled pumps, etc.
47
We reserve the right to make technical changes.
BECKHOFF New Automation Technology
Beckhoff | TwinCAT – The universal automation software platform
Solutions can be provided for all areas of building automation with the aid of the TwinCAT universal software tool. The extensive software libraries and supplements, which considerably simplify engineering, continue the concept of the modular Beckhoff automation components at software level as well.
High-end PLC – international IEC 61131-3 programming standard – reusable software modules can be used – almost unlimited memory – no restrictions in terms of number of blocks and variables – minimum PLC cycle times through native code generation – high-speed software solutions for controllers, etc. – up to four run-time systems per PC, up to four tasks per run-time system
Scada, Visual Basic, Delphi
System Manager
PLC control
Motion Control
configuration, service, monitoring
PLC programming
TwinCAT NC PTP TwinCAT NC I TwinCAT CNC
Scada, Visual Basic, Delphi, Visual C++, .NET, C#, VB.NET, …
OPC client
ADS
ADS
ADS
ADS OCX/DLL
Internet/Intranet
UA
XML
DA
TwinCAT OPC server ADS Message router TCP/IP | serial Message router Real-time server
ADS interface
ADS interface
ADS interface
ADS interface
ADS interface
ADS interface
System Manager
I/O server I/O run-time
PLC server PLC run-time
NC PTP server NC PTP run-time
NC I server NC I run-time
CNC server CNC run-time
I/O
I/O
I/O
I/O
I/O
I/O mapping I/O: all fieldbuses and PC interfaces 48
TwinCAT system architecture
BECKHOFF New Automation Technology
We reserve the right to make technical changes.
TwinCAT Supplements Software modules for TwinCAT that offer PC features for the PLC programmer: – Building Automation Framework – ADS Communication Library – OPC Server – Modbus Server – TCP/IP Connection Server – XML Data Server – SMS/SMTP Server – Database Server Visualisation – PLC HMI – PLC HMI Web – etc.
Beckhoff TwinCAT ADS communication interface – universal, vertical, horizontal – cyclical/event-driven – data exchange and/or commands – open protocol with example code – available on Windows operating systems – access from the PLC via function block – components free of charge: OCX/DLL/.NET/Script/Webservice Transparency via ADS, continuous routing via: – local/network – UDP/TCP/serial/Bluetooth/Fieldbus/ EtherCAT/SOAP (HTTP) TwinCAT network variables – publisher/subscriber variables via broadcast, multicast or unicast
49
Automation/industrial/IT protocols – TwinCAT supports all common standards.
We reserve the right to make technical changes.
BECKHOFF New Automation Technology
Beckhoff | Worldwide
50
BECKHOFF New Automation Technology
We reserve the right to make technical changes.
51
We reserve the right to make technical changes.
BECKHOFF New Automation Technology
Beckhoff | Worldwide support and service
Beckhoff and its partners around the world offer comprehensive support and service, guaranteeing fast and competent assistance with all questions related to Beckhoff products and system solutions.
Beckhoff Support Beckhoff offers you comprehensive technical assistance, helping you not only with the application of individual Beckhoff products, but also with wide-ranging services: – worldwide support – design, programming and commissioning of complex automation systems – training program for Beckhoff system components
Beckhoff Service The Beckhoff service center supports you in all matters of after-sales service: – 24-hour service – spare parts service – worldwide service – on-site service Beckhoff support and service are available to you wherever you are in the world, and can be reached by telephone, fax or e-mail. The contact addresses for your country can be found in the list of Beckhoff branches and partner companies.
Worldwide support and service contacts:
www.
beckhoff.com/support
52
BECKHOFF New Automation Technology
We reserve the right to make technical changes.
Beckhoff | Information Media
Order no. DK110x
Order no. DK130x
Order no. DK140x
Order no. DK4000
Main catalog
News catalog
Product overview
Product DVD
www.
beckhoff.com/media
Ordering information
Description
DK1101
Main catalog, German
DK1102
Main catalog, English
DK1301
News catalog, German
DK1302
News catalog, English
DK1401
Product overview, German
DK1402
Product overview, English
DK1405
Product overview, French
DK1406
Product overview, Italian
DK1407
Product overview, Russian
DK1409
Product overview, Turkish
DK4000
Main catalog and software products on DVD, German, English, Italian
We reserve the right to make technical changes.
53
BECKHOFF New Automation Technology
Beckhoff | www.beckhoff.com/building
The online manual The Beckhoff Information System contains a wide range of useful information about the Beckhoff products, including not only an overview of the products and relevant documentation, but also technical information, manuals, TwinCAT example codes, a knowledge base and much more.
http://infosys.beckhoff.com
Products online At www.beckhoff.com you can get detailed information on the range of products from Beckhoff. Animations, videos and interactive online presentations supplement the large variety of information.
www.
www.
beckhoff.com/news
beckhoff.com
Print media online The Beckhoff catalogs and flyers are available for download on the Internet. Printed copies are available on request. Please use our online order form to specify your requirements.
54
BECKHOFF New Automation Technology
We reserve the right to make technical changes.
Beckhoff Newsletter Beckhoff offers a further information service with the “New Automation Technology Newsletter”. Alongside printed and online media, customers and prospective customers can keep up to date quickly and simply via electronic mail. Beckhoff RSS feeds deliver the latest news directly to PCs or Smartphones.
www.
www.
beckhoff.com/newsletter
www.
beckhoff.com/TwinCAT
beckhoff.com/documentations
Online documentation In addition to all the information contained in the printed catalog, the online service offers additional information, available in the universal PDF or in CHM (Compiled HTML) file format: detailed documentation and manuals for the Beckhoff products and software updates, technical drawings and configuration files for the fieldbus components.
The full version of the powerful TwinCAT automation software can be downloaded and tested free of charge for 30 days.
Beckhoff®, TwinCAT®, EtherCAT®, Safety over EtherCAT®, TwinSAFE® and XFC® are registered trademarks of and licensed by Beckhoff Automation GmbH. Other designations used in this publication may be trademarks whose use by third parties for their own purposes could violate the rights of the owners.
Picture credits:
© Beckhoff Automation GmbH 04/2010
Schüco International KG (pages 1, 6, 8 –11, 14 –16, 26)
The information provided in this brochure contains merely general descriptions or characteristics of performance which in case of actual application do not always apply as described or which may change as a result of further development of the products. An obligation to provide the respective characteristics shall only exist if expressively agreed in the terms of contract.
The Dolder Grand, Zurich, photographer: Stefan Schmidlin (pages 4, 30)
We reserve the right to make technical changes.
BECKHOFF New Automation Technology
55
Beckhoff Automation GmbH Eiserstraße 5 33415 Verl Germany Phone: + 49 (0) 52 46 / 9 63 - 0 info@beckhoff.de www.beckhoff.de Europe Germany Office Balingen Beckhoff Automation GmbH Karlstraße 19 72336 Balingen Germany Phone: + 49 (0) 74 33 / 2 60 24 - 0 balingen@beckhoff.de Office Berlin Beckhoff Automation GmbH Fasanenstraße 81 10623 Berlin Germany Phone: + 49 (0) 30 / 88 71 16 - 0 berlin@beckhoff.de Office Frankfurt Beckhoff Automation GmbH Torhaus Westhafen Speicherstraße 59 60327 Frankfurt am Main Germany Phone: + 49 (0) 69 / 68 09 88 - 0 frankfurt@beckhoff.de Office Hanover Beckhoff Automation GmbH Podbielskistraße 342 30655 Hanover Germany Phone: + 49 (0) 5 11 / 87 57 58 - 0 hannover@beckhoff.de Office Lübeck Beckhoff Automation GmbH Wahmstraße 56 23552 Lübeck Germany Phone: + 49 (0) 4 51/ 20 39 88 - 0 luebeck@beckhoff.de Office Munich Beckhoff Automation GmbH Oppelner Straße 5 82194 Gröbenzell/Munich Germany Phone: + 49 (0) 81 42 / 4 10 59 - 0 muenchen@beckhoff.de Office Nuremberg Beckhoff Automation GmbH Ostendstraße 196 90482 Nuremberg Germany Phone: + 49 (0) 9 11 / 5 40 56 - 0 nuernberg@beckhoff.de Sales Office Ravensburg Beckhoff Automation GmbH Parkstraße 48 88212 Ravensburg Germany Phone: + 49 (0) 7 51 / 3 54 15 50 ravensburg@beckhoff.de Office Rhein/Ruhr Beckhoff Automation GmbH Eurotec-Ring 7 47445 Moers Germany Phone: + 49 (0) 28 41/ 9 08 16 - 6 rhein-ruhr@beckhoff.de Austria Headquarters Beckhoff Automation GmbH Hauptstraße 4 6706 Bürs Austria Phone: + 43 (0) 55 52 / 6 88 13 - 0 info@beckhoff.at www.beckhoff.at Sales Office Oberösterreich Beckhoff Automation GmbH Softwarepark 35 4232 Hagenberg Austria Phone: + 43 (0) 72 36 / 2 09 25 - 0 oberoesterreich@beckhoff.at Sales Office Niederösterreich Beckhoff Automation GmbH Leobersdorferstraße 42 2560 Berndorf Austria Phone: + 43 (0) 26 72 / 8 20 34 niederoesterreich@beckhoff.at Sales Office Tirol Beckhoff Automation GmbH Klammstraße 66 / 39 6020 Innsbruck Austria Phone: + 43 (0) 512 / 236 043 tirol@beckhoff.at Belgium, Luxembourg Beckhoff Automation BVBA Kempische Steenweg 305 bus 202 3500 Hasselt Belgium Phone: + 32 (0) 11 / 24 08 00 info@beckhoff.be www.beckhoff.be Multiprox N.V. Lion d‘Ôrweg 12 P.b. 71 9300 Aalst Belgium Phone: + 32 (0) 53 / 76 65 66 info@multiprox.be www.multiprox.be
Bulgaria Kastiva GmbH 68-72 Ami Bue Str., 4. Floor 1612 Sofia Bulgaria Phone: + 3 59 (2) 9 50 44 31 office@kastiva.com www.kastiva.com Croatia Krovel d.o.o. Barutanski jarak 114 10000 Zagreb Croatia Phone: + 3 85 / 16 11 77 20 beckhoff@krovel.hr www.krovel.hr Czech Republic, Slovac Republic Dyger s.r.o. Vystaviste 1 648 59 Brno Czech Republic Phone: + 420 5 / 41 32 10 04 info@dyger.cz www.dyger.cz Denmark Headquarters Beckhoff Automation ApS Naverland 2 2600 Glostrup Denmark Phone: + 45 43 / 46 76 20 info@beckhoff.dk www.beckhoff.dk Office Hobro Beckhoff Automation ApS Majsmarken 1 9500 Hobro Denmark Phone: + 45 76 / 36 38 31 info@beckhoff.dk Office Kolding Beckhoff Automation ApS Birkemose allé 25 6000 Kolding Denmark Phone: + 45 76 / 31 20 72 info@beckhoff.dk Finland, Estonia Headquarters Beckhoff Automation Oy P.O. Box 23 Kankurinkatu 4-6 05801 Hyvinkää Finland Phone: + 358 (0) 20 / 7 42 38 00 info@beckhoff.fi www.beckhoff.fi Sales Office Seinäjoki Beckhoff Automation Oy Tiedekatu 2 60320 Seinäjoki Finland Phone: + 358 (0) 20 / 7 42 38 50 info@beckhoff.fi Sales Office Tampere Beckhoff Automation Oy Hermiankatu 1 B 33720 Tampere Finland Phone: + 358 (0) 20 / 7 42 38 70 info@beckhoff.fi France Headquarters Beckhoff Automation Sarl Immeuble “Le Montréal” ZA de Courtaboeuf 19 bis, avenue du Québec 91951 Courtaboeuf Cedex France Phone: + 33 (0) 1 69 29 83 70 info@beckhoff.fr www.beckhoff.fr Sales Office Neuville en Ferrain Beckhoff Automation Sarl 28, Rue de Tourcoing 59960 Neuville en Ferrain France Phone: + 33 (0) 3 20 11 00 08 info@beckhoff.fr Greece, Cyprus L. J. Skourgialos Industrial Automation Systems 241 EL. Venizelou 176 73 Kallithea /Athens Greece Phone: + 30 / 21 09 51 02 60 ias@otenet.gr Hungary Controrg Kft. Pajta u. 14 8200 Veszprem Hungary Phone: + 36 / 88 42 40 75 info@controrg.hu www.controrg.hu Italy Headquarters Beckhoff Automation S.r.l. Via E. Majorana, 1 20054 Nova Milanese (MI) Italy Phone: + 39 03 62 / 36 51 64 info@beckhoff.it www.beckhoff.it Office Bologna Beckhoff Automation S.r.l. Via Zanini, 7 40011 Anzola dell‘Emilia (BO) Italy Phone: + 39 05 1 / 73 15 09 bologna@beckhoff.it
Office Padua Beckhoff Automation S.r.l. Via Alsazia, 3/B 35127 Padua (PD) Italy Phone: + 39 0 49 / 8 70 48 38 padova@beckhoff.it Lithuania, Latvia, Belarus Santavilté UAB Taikos 149 52119 Kaunas Lithuania Phone: + 3 70 37 / 35 01 66 info@santavilte.lt www.santavilte.lt Netherlands Industrial Automation Link Küppersweg 71 2031 EB Haarlem Netherlands Phone: + 31 23 / 5 18 51 40 sales@ial.nl www.ial.nl
Sales Office Madrid Beckhoff Automation S.A. Edificio Cimaga Sierra de Cazorla, 1 Planta Baja, Oficina E 28290 Las Matas (Madrid) Spain Phone: + 34 91 / 6 36 43 57 madrid@beckhoff.es Sweden Headquarters Beckhoff Automation AB Stenåldersgatan 2A 21376 Malmö Sweden Phone: + 46 (0) 40 / 6 80 81 60 info@beckhoff.se www.beckhoff.se Sales Office Danderyd Beckhoff Automation AB Enebybergsvägen 10B 18236 Danderyd Sweden Phone: + 46 (0) 8 / 4 46 30 00 info@beckhoff.se
Norway Beckhoff Automation AS Træleborgodden 6 3112 Tønsberg Norway Phone: + 47 33 50 46 90 info@beckhoff.no www.beckhoff.no
Sales Office Värnamo Beckhoff Automation AB Västbovägen 53 33153 Värnamo Sweden Phone: + 46 (0) 40 / 6 80 81 60 info@beckhoff.se
Poland Beckhoff Automation Sp. z o.o. Stara Iwiczna, ul. Sloneczna 116A 05-500 Piaseczno Poland Phone: + 48 22 / 7 57 26 10 info@beckhoff.pl www.beckhoff.pl
Switzerland Headquarters Beckhoff Automation AG Rheinweg 9 8200 Schaffhausen Switzerland Phone: + 41 (0) 52 / 6 33 40 40 info@beckhoff.ch www.beckhoff.ch
Portugal Bresimar Automação, S.A. Quinta do Simão – EN109 – Esgueira Apartado 3080 3801-101 Aveiro Portugal Phone: + 351 234 / 30 33 20 bresimar@bresimar.pt www.bresimar.pt
Office Zurich Beckhoff Automation AG Felsenrainstrasse 1 8052 Zurich Switzerland Phone: + 41 (0) 52 / 633 40 40 info@beckhoff.ch
Romania Kreatron Automation S.R.L. Str. Octavian Fodor nr. 113, ap. 13 400434, Cluj-Napoca jud. Cluj Romania Phone: + 40 264 / 48 47 08 office@kreatron.ro www.kreatron.ro Russia Headquarters Beckhoff Automation OOO Ul. Bakuninskaya 14, Building 9 105005 Moscow Russia Phone: + 7 495 / 9 81 64 54 russia@beckhoff.com www.beckhoff.ru Representation North-West Federal District Beckhoff Automation GmbH V.O., 7-ya Liniya, 76, Office 620 199178 Saint-Petersburg Russia Phone: + 7 812 / 332 62 05 north-westfo@beckhoff.ru Representation Ural Federal District Beckhoff Automation GmbH Uliza Komsomolskaya 37, Office 402/4 620049 Ekaterinburg Russia Phone: + 7 3 43 / 3 79 98 73 uralfo@beckhoff.ru Representation Volga Federal District Beckhoff Automation GmbH Krasnoarmayskaya ul.1, Office 312 443010 Samara Russia Phone: + 7 846 / 2 69 80 67 volgafo@beckhoff.ru Slovenia Beckhoff Avtomatizacija d.o.o. Zbiljska cesta 4 1215 Medvode Slovenia Phone: + 3 86 / 13 61 30 80 info@beckhoff.si www.beckhoff.si Spain Headquarters Beckhoff Automation S.A. Edificio Testa Sant Cugat Avda. Alcalde Barnils, 64-68 08174 Sant Cugat (Barcelona) Spain Phone: + 34 93 / 5 84 49 97 info@beckhoff.es www.beckhoff.es Sales Office Bilbao Beckhoff Automation S.A. Edificio Udondo C. Ribera de Axpe, no 50 4a planta, Oficina 4-5 48950 Erandio (Bilbao) Spain Phone: + 34 94 / 4 31 40 75 info@beckhoff.es
Office Derendingen Beckhoff Automation AG Application/Software Development Hauptstrasse 39 4552 Derendingen Switzerland Phone: + 41 (0) 32 / 682 04 28 info@beckhoff.ch Sales + Support Center Suisse Romande Beckhoff Automation AG En Chamard 35 1442 Montagny-près-Yverdon Switzerland Phone: + 41 (0) 24 / 447 27 - 00 yverdon@beckhoff.ch Support Center Ticino p.project sagl Via Pianella 19 6596 Gordola Switzerland Phone: + 41 (0) 91 / 745 01 11 ticino@beckhoff.ch Turkey Beckhoff Otomasyon ltd. şti. Gardenya-3 Plaza No: 18-19 34758 Ataşehir Istanbul Turkey Phone: + 90 216 580 9830 info@beckhoff.com.tr www.beckhoff.com.tr UK, Ireland Beckhoff Automation Ltd. The Boathouse Station Road Henley-on-Thames Oxon RG9 1AZ Great Britain Phone: + 44 14 91 / 41 05 39 info@beckhoff.co.uk www.beckhoff.co.uk North America USA Headquarters and Training Center Beckhoff Automation LLC 12150 Nicollet Avenue South Burnsville, MN 55337 USA Phone: + 1 952 / 890 0000 beckhoff.usa@beckhoff.com www.beckhoffautomation.com East Region Headquarters and Training Center Beckhoff Automation LLC Charlotte, NC USA Phone: + 1 704 / 910 4367 east.usa@beckhoff.com East Region Sales Beckhoff Automation LLC Coplay, PA USA Phone: + 1 952 / 212 6226 newengland@beckhoff.com Beckhoff Automation LLC Hanover, PA USA Phone: + 1 717 / 634 5536 northeast.sales@beckhoff.com
Beckhoff Automation LLC Canton, MI USA Phone: + 1 248 / 230 8835 michigan@beckhoff.com Beckhoff Automation LLC Medina, OH USA Phone: + 1 330 / 725 2403 mideast.usa@beckhoff.com Beckhoff Automation LLC Lake Wylie, SC USA Phone: + 1 803 / 746 5491 east.usa@beckhoff.com Beckhoff Automation LLC Apex, NC USA Phone: + 1 919 / 367 0349 southeast.usa@beckhoff.com Central Region Sales and Training Center Beckhoff Automation LLC Fond du Lac, WI USA Phone: + 1 920 / 929 0655 wisconsin@beckhoff.com Central Region Sales Beckhoff Automation LLC Burnsville, MN 55337 USA Phone: + 1 952 / 808 6513 north.usa@beckhoff.com Beckhoff Automation LLC Lemont, IL USA Phone: + 1 630 / 631 8467 midwest.usa@beckhoff.com Beckhoff Automation LLC Rogers, AR USA Phone: + 1 479 / 925 2951 south.usa@beckhoff.com Beckhoff Automation LLC Cedar Park, TX USA Phone: + 1 512 / 250 9809 southwest.sales@beckhoff.com Beckhoff Automation LLC Justin, TX USA Phone: + 1 817 / 428 5314 southwest.sales@beckhoff.com West Region Sales Beckhoff Automation LLC San Diego, CA USA Phone: + 1 858 / 546 1111 west.sales@beckhoff.com Beckhoff Automation LLC La Crescenta, CA USA Phone: + 1 818 / 224 9065 losangeles@beckhoff.com Beckhoff Automation LLC San Jose, CA USA Phone: + 1 408 / 823 3962 n.california@beckhoff.com Beckhoff Automation LLC Phoenix, AZ USA Phone: + 1 602 / 354 0506 arizona@beckhoff.com Beckhoff Automation LLC Arvada, CO USA Phone: + 1 303 / 429 0758 mountain.sales@beckhoff.com Beckhoff Automation LLC Mill Creek, WA USA Phone: + 1 425 / 451 4444 northwest.sales@beckhoff.com West Region Technical Center Beckhoff Automation LLC San Diego, CA USA Phone: + 1 858 / 546 1111 west.application@beckhoff.com Canada Headquarters Sales, Training Center and Application Development Beckhoff Automation Canada Ltd. 130 Research Lane Guelph, ON N1G 5G3 Canada Phone: + 1 905 / 852 1534 canada@beckhoff.com Canada Sales Beckhoff Automation Canada Ltd. London, ON Canada Phone: + 1 519 / 451 8572 canada@beckhoff.com Mexico Mexico Sales and Application Development Integra Automation, SA de CV Av. Industrias 325-A 78399 Fracc. Talleres San Luis Potosí, S.L.P. México Phone: + 52 444 / 822 2615 al 17 mexico@beckhoff.com
Central and South America Argentina eFALCOM Alcorta 2411 CPA B1744HFM Moreno / Buenos Aires Argentina Phone: + 54 237 / 463 1151 info@efalcom.com www.efalcom.com
Office Wuhan Beckhoff Automation (Shanghai) Co. Ltd. Room 1803, 18/F., Wuhan Zhongshang Plaza, NO.7, Zhongnan Road, Wuhan, Hubei P.R. China Phone: + 86 27 / 81 34 87 15 wuhan@beckhoff.com.cn
Brazil Headquarters Beckhoff Automação Industrial Ltda. Rua Continental, 146 São Bernardo do Campo São Paulo 09750-060 Brazil Phone: + 55 (11) 4126-3232 info@beckhoff.com.br www.beckhoff.com.br
India Beckhoff Automation Pvt. Ltd. Suite 4, Level 6, Muttha Towers Don Bosco Marg Pune – 411 006 India Phone: + 91 20 / 40 00 48 00 info@beckhoff.co.in www.beckhoff.co.in
Sales Office Campinas Beckhoff Automação Industrial Ltda. Edifício Empresarial Torre do Castelo Rua Francisco Otaviano, 60 Sala 94 – Bairro Chapadão Campinas 13070-056 – SP Brazil Phone: + 55 (19) 3368-7288 info@beckhoff.com.br Chile Tecmel Chile S.A. Padre Orellana 1486 Santiago Chile Phone: + 562 / 596 2541 mberrios@tecmelchile.cl www.tecmelchile.cl Costa Rica, Nicaragua, Honduras, El Salvador, Guatemala, Belize, Panama TAAC S.A. 50 Sur Hotel Grano de Oro Calle 30, Avenidas 4-6 San José 10103 Costa Rica Phone: + 506 / 2222-6450 info@taac-sa.com www.taac-sa.com Uruguay Comando Ltda. Dr. J. de Salterain 1142 Montevideo 11200 Uruguay Phone: + 598 (2) / 400-7923 comando@comandonet.com www.comandonet.com Africa Egypt Industrial Control Systems ICS 29 Dr. Mohamed El Harouny Street Nasr City, Cairo 11371 Egypt Phone: + 20 2 / 2 75 50 31 info@ics-me.com www.ics-me.com South Africa Beckhoff Automation (Pty) Ltd Unit 8, Boskruin Business Park, Randpark Ridge Randburg 2188 South Africa Phone: + 27 (0) 11 792 3374 info@beckhoff.co.za www.beckhoff.co.za Asia China Headquarters Beckhoff Automation (Shanghai) Co. Ltd. 5th Floor, No. 163 JiangChang San Road Shanghai Shibei Industrial Zone Shanghai, 200436 P. R. China Phone: + 86 21 / 66 31 26 66 info@beckhoff.com.cn www.beckhoff.com.cn Office Beijing Beckhoff Automation (Shanghai) Co. Ltd. Room 1801-1803, Tower T3, Xihuan Plaza, No.1, Xizhimenwai Avenue Xicheng District Beijing, 100044 P. R. China Phone: + 86 10 / 58 30 12 36 beijing@beckhoff.com.cn Office Chengdu Beckhoff Automation (Shanghai) Co. Ltd. 8F, G of The City Tower, No. 86, Section one, South Peoples Road Chengdu, Sichuan, 610016 P. R. China Phone: + 86 28 / 86 20 25 81 chengdu@beckhoff.com.cn Office Guangzhou Beckhoff Automation (Shanghai) Co. Ltd. Room 4118-4119 Yaozhong Plaza 9 West Linhe Road Tianhe District Guangzhou, 510620 P. R. China Phone: + 86 20 / 38 01 03 00 guangzhou@beckhoff.com.cn
Inteltek Automation Pvt. Ltd. Sr.no.100/5, Ambegaon Pune – 411 046 Maharashtra India Phone: + 91 20 / 24 31 81 21 info@inteltekindia.com www.inteltekindia.com Japan K.MECS Co., Ltd. Yusen Iwamotocho Blg. 3F 2-3-3 Iwamotocho, Chiyoda-City, Tokyo 101-0032 Japan Phone: + 81 3 5825 5333 info@kmecs.co.jp www.kmecs.com Lebanon, Jordan, Syria Industrial Technologies (itec) S.A.L. Afrah Plaza Center, Blvd Fouad Chehab Sin El Fil, Beirut Lebanon Phone: + 961 (1) 49 11 61 info@iteclb.com www.iteclb.com Singapore, Malaysia, Philippines, Vietnam, Indonesia TDS Technology (S) Pte Ltd. 64 Sungei Kadut Loop (Hocen Building) Singapore 729493 Singapore Phone: + 65 / 63 66 16 61 sales_sg@tdstech.com www.tdstech.com Thailand TDS Technology (Thailand) Co., Ltd. 50/962 Moo 2 Bengyeetos Thanyaburi Pratumthanee 12130 Bangkok Thailand Phone: + 66 (0) 2569 5511 sales_th@tdstech.com www.tdstech.com T & R Electronic (Thailand) Co., Ltd. 120/62 Moo 8 Bang Sare Sattahip Chonburi 20250 Thailand Phone: + 66 (0) 3873 7487 trthailand@trelectronic.co.th www.trelectronic.co.th South Korea Tri-TEK Corp. 717 DaeRyung TechnoTown III 448 KasanDong Kumcheongu Seoul 153-803 Korea Phone: + 82 2 / 2107-32 42 tritek@tritek.co.kr www.tritek.co.kr Taiwan JI-DIEN Co., Ltd. 9F., No. 22, Sec. 1, Zhongshan Rd. Xingzhuang City Taipei County 242 Taiwan (R.O.C.) Phone: + 886 (2) 8522 3237 jidien@chgroup.com.tw www.chgroup.com.tw United Arab Emirates, Oman, Qatar, Bahrain, Kuwait, Saudi Arabia Beckhoff Automation FZE C# 608, Dubai Silicon Oasis P.O. Box No. 341007 Dubai United Arab Emirates Phone: + 971 4 5015480 info@beckhoff.ae www.beckhoff.ae Australia Australia Beckhoff Automation Pty. Ltd. Level 16, 10 Queens Road Melbourne, Victoria, 3004 Australia Phone: + 61 (3) 99 12 54 30 info@beckhoff.com.au www.beckhoff.com.au New Zealand CSE-W. Arthur Fisher Ltd P.O. Box 58955 Botany Manukau 2163 New Zealand Phone: + 64 9 271 3810 sales@cse-waf.co.nz www.cse-waf.co.nz
www.beckhoff.com
DK3502-0410
Headquarters