DRINKING WATER SYSTEMS RIGID TANKS FOR DRINKING WATER This range of rigid drinking water tanks is available in 9 different shapes and sizes. They are supplied without fittings and therefore these can be installed wherever you choose. The synthetic material is suitable for drinking water and meets the KTW standard. The construction of the tank is seamless and will never corrode or leak. The water level can be seen from outside for easy checking and the tank is easily cleaned through the inspection lid. A connection kit should be ordered separately for each tank, together with additional inspection lids if required. WTANK42
Plastic drinking water tank 42 l. (excl. install. kit)
WTANK61
Plastic drinking water tank 61 l. (excl. install. kit)
WTANK88
Plastic drinking water tank 88 l. (excl. install. kit)
WTANK
WTANK110 Plastic drinking water tank 110 l. (excl. install. kit) WTANK137 Plastic drinking water tank 137 l. (excl. install. kit) WTANK170 Plastic drinking water tank 170 l. (excl. install. kit) WTANK215 Plastic drinking water tank 215 l. (excl. install. kit) WTANK335 Plastic drinking water tank 335 l. (excl. install. kit) WTANK390 Plastic drinking water tank 390 l. (excl. install. kit)
The 88, 137, 170, 215, 335 and 390 litre models are provided with baffles, as a standard construction element.
A range of rigid drinking water tanks available in 9 different shapes and sizes. dimensions: plus or minus 2%
CONNECTION KIT • Inspection lid (1) • Right angle connection RT38B for filling hose, Ø 38 mm (2) • Right angle connection RT16B to water pump, Ø 16 mm (3) • Right angle connection RT16B 6 for ventilation, Ø 16 mm (4) • Two mounting straps (5) • T-joint, for interconnection, Ø 16 mm For the 88, 137, 170, 215, 335 and 390 l. tanks, extra inspection lid kits are available (WTIKIT). An angled connection RT13B for ø 13 mm pump hose is available as an option.
SUCTION PIPE FOR DRINKING WATER TANKS
WTKIT
This suction pipe can be fitted to the top surface of almost all fixed tanks with a maximum depth of 410 mm. It is suitable for ø 13 mm drinking water systems.
Additional inlet and outlet connectors in various sizes are available separately.
INSPECTION LID KIT
WTK02
Inspection lid kit, complete with gasket, counterflange and fastenings. Overall diameter 156 mm. Cut out diameter 115 mm. Only suitable for (waste) water tanks, not for fuel tanks.
WTIKIT
WTS44513B
ULTRASONIC LEVEL SENSOR See page 96.
SENSORA
102 www.vetus.com
102103_11_ROW.indd 2
12/16/2010 11:17:41 PM