133
ETSI EN 300 392-7 V2.3.1 (2006-06)
A.6
PDUs for Enable and Disable
A.6.1
D-DISABLE
This message is sent by the Infrastructure to indicate that the mobile station shall be disabled (permanently or temporarily). •
Direction:
SwMI to MS;
•
Service used:
MM;
•
Response to:
-;
•
Response expected:
U-DISABLE STATUS or U-AUTHENTICATION RESPONSE. Table A.31: D-DISABLE contents
Information element PDU Type Intent/Confirm Disabling type Equipment disable TETRA Equipment Identity Subscription disable Address Extension SSI Authentication challenge Proprietary
A.6.2
Length 4 1 1 1 60 1 24 24 160
Type 1 1 1 1 1
2 3
C/O/M M M M M C M C C O O
Remark D-DISABLE. Intent or confirm. Temporary or permanent. Disable equipment. Present if equipment disable = 1. Disable subscription. Present if Subscription disable = 1. Present if Subscription disable = 1.
D-ENABLE
This message is sent by the Infrastructure to indicate that the mobile station shall be enabled after a disable. •
Direction:
SwMI to MS;
•
Service used:
MM;
•
Response to:
-;
•
Response expected:
U-DISABLE STATUS or U-AUTHENTICATION RESPONSE. Table A.32: D-ENABLE contents
Information element PDU Type Intent/Confirm Equipment enable TETRA Equipment Identity Subscription enable Address Extension SSI Authentication challenge Proprietary
Length 4 1 1 60 1 24 24 160
Type 1 1 1 1
2 3
C/O/M M M M C M C C O O
ETSI
Remark D-ENABLE. Intent or confirm. Enable of equipment. Present if equipment enable = 1. Enable of subscription. Present if Subscription enable = 1. Present if Subscription enable = 1.