M A D E
F O R
T H E
P R O F E S S I O N A L
®
Retaining Compounds Max Viscosity Gap Fill cP (Diametral)
Shear Strength
Temperature Range
Cure - Steel Fixture (Full)
Use/Common Applications
125
3,000 PSI
-65° to 300°F (-54° to 149°C)
10 min. (24 hrs.)
Bushings, bearings, oil seals, ring gear bolts, differential lock pins
.007”
600
3,000 PSI
-65° to 400°F (-54° to 204°C)
1 hr (24 hrs.)
Valve guides, woodruff keys, bearings and bushings, reanchoring studs, pins and sleeves.
Green
.015”
1,250
2,800 PSI
-65° to 300°F (-54° to 149°C)
10 min. (24 hrs.)
Replaces set screws, replaces clamp rings, replaces snap ring, wheel bearings, idler shaft, press fit bearings
Grey
.020”
1,200,000 3,000 PSI
-65° to 300°F (-54° to 149°C)
10 min. (1-2 hrs.)
Refitting worn shafts and housings, repair worn keyways, repair loose set screws, refit worn couplings, form-in-place shims
Product
Item No.
Color
Permatex® Bearing Mount For Close Fits
60910 60950
Green
.005”
Permatex® High Temperature Sleeve Retainer
64000 64040
Green
Permatex® Bearing Mount For Relaxed Fits
68050
Permatex® Bearing Mount For Worn Parts
20297
Permatex® High Temperature Sleeve Retainer
Permatex® Bearing Mount for Close Fits
OEM specified. High temperature, up to 400ºF (204ºC), anaerobic adhesive that secures slip and press fit assemblies. Adds up to 3,000 PSI holding power. Restores fit to worn or out-of-tolerance assemblies. Prevents surface corrosion. Conforms to ASTM D5363 AN0411 (Mil-R-46082, Type II).
OEM specified. A low viscosity, rapidcuring anaerobic adhesive that augments the strength of press fit assemblies up to .005" in diameter. Adds up to 3,000 PSI holding power. Conforms to ASTM D5363 AN0411 (Mil-R-46082, Type I).
OEM INTERCHANGE, see pgs. 76-81 Item #
Container Size
64000 64040
6 ml tube, carded 36 ml bottle, carded
Permatex® Bearing Mount for Relaxed Fits
Pack 12 6
OEM specified. High strength, medium viscosity anaerobic adhesive for slip fit assemblies. Provides 2,800 PSI shear strength on steel. Fixtures in 10 minutes at room temperature. Suggested Applications: Replaces set screws, replaces clamp rings, replaces snap rings, wheel bearings, idler shaft, press fit bearings OEM INTERCHANGE, see pgs. 76-81 Container Size
68050
50 ml bottle
OEM INTERCHANGE, see pgs. 76-81 Item #
Container Size
60910 60950
10 ml bottle, carded 50 ml bottle
Pack 6 6
Permatex® Bearing Mount for Worn Parts
Nonfood Compounds Program Listed (P1) (134528)
Item #
Suggested Applications: Bushings, bearings, oil seals, ring gear bolts, differential lock pins
Retaining Compounds
Suggested Applications: Cylinder sleeves, valve guides, valve seats, bearings and bushings, woodruff keys, liner assemblies
OEM specified. A creamy, non-running adhesive used between parts to repair large gaps and severely worn parts. Adds up to 3,000 PSI holding power. Fills gaps to .020" in diameter. Use to 300ºF (149ºC). Very rapid cure. Suggested Applications: Refitting worn shafts and housings, repair worn keyways, repair loose set screws, refit worn couplings, form-in-place shims
Pack
Item #
Container Size
6
20297
6 ml tube, carded
Pack 6
25 Visit www.permatex.com