ATV SPECIAL TOOLS TOOLS
PART NUMBER
DESCRIPTION
PU-45778
OIL SYSTEM PRIMING TOOL
ENGINE/COOLING CONT. To be used after an engine rebuild to fill the oil passages and prime the oil pump. This operation minimizes the amount of time the engine runs without oil. Application: Domestic ATV 4-stroke and Frontier
PU-45838
GEAR HOLDER Used to hold the cam and counter balance gears when removing their retaining bolts. Also used when installing and torquing the retaining bolts. Must use PU-45543 Universal Driver Handle. Application: Domestic ATV 4-stroke and Frontier
TRANSMISSION/GEARCASE/DRIVELINE 8700226 8700225
CV BOOT CLAMP PLIERS 8700226 (A) For ear type clamps 8700225 (B) For earless type clamps Required to secure clamping bands for CV driveshaft boots.
2870772
STRAIGHT WRENCH To remove axle nuts when servicing rear axle assembly on chain driven ATV’s 13⁄4".
2870871
BALL JOINT REPLACEMENT TOOL For removal and installation of lower ball joints on models with pressed-in ball joints on the front strut casting.
2871199
SEAL SLEEVE INSTALLATION TOOL KIT For installation of seal sleeves on front hub strut of all 4x4 ATVs with AWD located on front hubs. (Non-centralized Hilliard applications).
TO ORDER SPECIAL SERVICE TOOLS CALL 1-800-328-6657
7