SINGLE-PHASE CONTROL PANELS FOR SEWAGE WATER
QMD10/...kW-A-AR Single-phase direct start control panel for 1 electric pump with ammetric protection for sewage water
In the specific case of the waste-water drainage sector, we offer control panels for singlephase electric pumps which can operate with either sensors or bulb floating switches, or with normal floating switches. As usual, please feel free to contact our technical/sales assistance if you have any questions.
RUN
CONNECTION DIAGRAM
A
ALARM
P
B
GENERAL CHARACTERISTICS:
– Electronic control panel; – Power supply ~ 50/60Hz 230V±10%; – Very low voltage input from n°3 bulb float IIIswitches (stop, start, level alarm); – N°1 very low voltage input for motor thermal switch or N.C.. sensor; – Selector for pressure switch or minimum level float (contacts N.C. or N.O.); – Main pilot light ; – Operating motor light; – Protected motor light; – Min/Max water level alarm light; – Selector for automatic-off-manual operation (the last control is not latched ); – External push button for overload current protection reset; – Electronic protection with adjustable current and cut-in time; – Motor protection fuse; – Auxiliary protection fuse; – 24Vac output alarm. Alarm is active in case of intervention of overload or max level protection; – General disconnecting switch with door lock; – Thermoplastic box; – Protected to IP50.
DESIGNED FOR FITTING OF:
PROTECTED TO IP55 OPTIONAL:
– KCC/…: Wired capacitor kit (on request, depending on the chosen motor); – MR/ED-120”-400 code 221.12 (see last pages) module for switch on and switch off of the electric pump adjustable from 0 to 120”.
– Switch cover, code 644.344; – Push button cover, code 644.345.
ELECTRONIC SPARE PARTS: – Mother board, code 223.36; – Synoptic, code 316.03.
OPTIONAL: – KIT/DS10M code 272.53 KIT Sensor device kit for 1 motor: detects the presence of water in the oil chamber, with motor shutdown in the event of detection. Supplied with relative warning lamp and alarm output;
OPERATING CONDITIONS:
N.B: the addition of this module requires the change of the box with an increase in price, ask to our technical / sales office.
- Ambient temperature –5 to +40°C; – Relative moisture 50% with a max temperature of 40°C.
TECHNICAL DATA AND OPERATING POWERS MODEL
QMD10/2,2kW-A-AR
12
CODE
APPROX POWER AT 230V kW
APPROX POWER AT 230V Hp
CURRENT ABSORPTION (A) MIN
CURRENT ABSORPTION (A) MAX
WEIGHT kg
DIMENSIONS mm A
DIMENSIONS mm B
DIMENSIONS mm P
272.30
0,37 - 2,2
0,5 - 3
2
18
1,7
265
200
130
www.manieroelettronica.it