606
Office: +44 (0)161 337 4390 • Email: sales@mageurope.eu • www.mageurope.eu
607
608
Office: +44 (0)161 337 4390 • Email: sales@mageurope.eu • www.mageurope.eu
609
High Pressure Gas Monotube Threaded Preload Adjuster Deflective Disc Damping Hard Anodized Internal Coating Adjustable Compression Damping Lifetime Limited Warranty and Rebuildable Available for Dyna, XR1200, Sportster & Triumph, including Thruxton, Scrambler and Bonneville (more on the way).
Inspired by racers, riders and those that demand more of their bikes than weekend coffee runs. The built in the USA 970 Series shocks combine a high pressure gas monotube design with deflective disc damping routed through two unique circuits and adjustable for compression damping via an easily accessible knob. Tune to your riding style and pin the throttle.
610
Frequency Sensing Technology (FST), – Allows the shocks to sense the frequency of a bump and automatically adjust damping for superior ride quality Adjust spring pre-load by hand, no special tool needed Progressive Rate Main springs specifically designed for touring High Pressure gas charged for consistent performance Lifetime Limited Warranty and Made in USA!
Built around our all new Frequency Sensing Technology (FST), and wrapped in a state of the art set of springs that allows your bagger to sit lower than stock, but retain the full down travel of a factory set up! The 944 Series combines a progressive rate main spring with a flat wire compensator spring that compresses under the weight of the bike, but readily extends when needed to allow for full drop travel. The result is a bike with a 1” lowered height that rides better than a stocker!
Office: +44 (0)161 337 4390 • Email: sales@mageurope.eu • www.mageurope.eu
611
Frequency Sensing Technology (FST), – Allows the shocks to sense the frequency of a bump and automatically adjust damping for superior ride quality Deflective disc valving Adjust spring pre-load by hand, no special tool needed Progressive rate spring Standard or heavy duty spring rate and black or chrome finish Lifetime Limited Warranty & made in USA Available in 11.0 inch to 13.5 inch lengths
After more than a decade of ruling the roads with our road proven 440 Series shocks, We’ve unveiled another breakthrough design. Dubbed Frequency Sensing Technology (FST) for its unique ability to dynamically adjust damping as you ride. The result is superior performance no matter the road conditions. A top mount threaded preload adjuster allows for fine tuning with a simple twist of the cap.
612
High pressure gas charged monotube for consistant damping performance Progressive rate springs available in standard or heavy duty rates Chrome covers with chrome springs or contrast cut black anodized with black springs Lifetime Limited Warranty Available in lengths from 11.0 inch to 13 inch
We have once again upped the ante with the street rod styled 430 series of shocks. Utilizing a high pressure gas mono tube design with deflective disk damping to insure high performance ride control, the 430 Series can also be mounted rod up or rod down, depending on your application. Threaded pre-load adjusters allow for tool-less adjustment, and effortless tuning of ride quality. First of their kind, machined aluminum spring perches are complimented by smooth lines and a polished chrome body.
Office: +44 (0)161 337 4390 • Email: sales@mageurope.eu • www.mageurope.eu
613
Chrome air chamber Multi-stage velocity sensitive damper Unique internal bumper, cushions even the hardest hits Up to 2.5� of height adjustment on most Touring models Optional easy to install compressor (mounts in saddlebag) AirDragger Shocks for HD Touring models (1980 and up) EasyMount Compressor for HD Touring models (1980 and up)
By combining a machined aluminum air chamber, velocity sensitive, multi-stage valving and an internal progressive rate coil spring, we’ve once again elevated air suspension to a new level. The clean and simple full chrome body mounts to all late model touring bikes and is powered by a clever compressor unit that simply mounts into the back of a saddlebag. Effortless installation, up to 2.5� of on-the-fly height adjustment and an economical price is a hard to beat combination!
614
All steel double wall damper with multistage velocity sensitive damping 5-Position cam style preload adjuster High pressure gas charged for consistant damping performance Standard or heavy-duty progressive rate springs in either chrome or black Optional full chrome or black covers on select applications
Simply the best value shock on the market today. The 412s proven, durable design means they will be an improvement to your motorcycle’s suspension performance. The double-wall steel body construction with nitrogen charged, multi-staged velocity sensitive valving gives you smooth, consistent damping. A five position cam style preload adjuster lets you dial in your ride whether you’re a light rider or heavy hitter. Standard or Heavy-Duty, and lengths from 11” to 14.2”, there is sure to be a 412 that’s right for you and your bike.
Office: +44 (0)161 337 4390 • Email: sales@mageurope.eu • www.mageurope.eu
615
Custom tuned multistage damper Precision machined aircraft grade aluminum air chamber Replaceable air & oil seals Standard air fitting is adaptable to most stock air fill systems Standard dust boot for additional protection against the elements Rebuildable
The “Original� Air Shock features a machined aluminum air chamber for perfect sealing surfaces, heavy duty springs, air adjustability and velocity sensitive, multi-stage valving.
The 416 Series is
the perfect choice for the touring rider who carries a varied load. Air lines and fittings are easily installed. An optional adapter kit is available for most touring bikes to tap into the stock air fill system (fill valve or air compressor).
616
Five position cam style preload adjuster Standard or heavy-duty progressive rate springs in chrome or black (sold separately) 12 Series shocks are dampers only. Progressive Suspension springs can be mated for a customized ride 13 Series twin shocks for off road applications - dampers only. PS springs can be mated for a customized ride 14 Series twin shocks for vintage applications are dampers only. PS springs can be mated for a customized ride
With shock and fork spring fitments all the way back to 1949, Progressive Suspension likely has the suspension setup you need for your restoration, AHRMA racer or vintage machine. The 12, 13 & 14 Series shocks are sold as damper sets and can be mated to a number of springs to properly tune for your application. For the best information, check out the search utility on:
www.progressivesuspension.com
Office: +44 (0)161 337 4390 • Email: sales@mageurope.eu • www.mageurope.eu
617
CHROME plated 2 INCHES of ride height adjustment Preload adjustable High pressure gas charged monotube for consistant damping performance Now available in HEAVY DUTY version! 1989 and up Softail速 applications
Our suspension system for the venerable Softail style chassis is exclusively available as an adjustable ride height version. Progressive Suspension was the first to introduce aftermarket shocks for the most popular frame design ever produced and we continue to refine our work. Two inches of ride height adjustment as well as adjustable for spring preload to accommodate varying loads and rider weights, all wrapped in a chrome shroud and now available in a HEAVY DUTY version for two-up or heavily loaded bikes! .
618
All new RAP system for Softail Easy tuning to adjust for changing loads Height adjustable (up to 2”, requires tool) Heavy Duty Spring Rate Available for 1989 and up Softail models
The Softail® chassis has long been a challenge to set up. The shocks are hidden under the frame which makes common adjustments difficult. Not anymore! Our engineering team over at Progressive have come up with a clever solution. We call it RAP (or Remote Adjustable Preload) and it combines our high performance shocks with a remote preload adjuster. Conveniently located behind the left passenger peg, the RAP system allows for easy tuning of the shocks to account for changing loads or the addition of a passenger. Packing a lot of gear for a big ride? Give the knob a few turns and the bike is set. Riding solo? A few rotations the other direction softens things up.
Office: +44 (0)161 337 4390 • Email: sales@mageurope.eu • www.mageurope.eu
619
Integrated air & coil shock Independent firmness & height adjustments High pressure gas charged monotube for consistant damping performance Compressor kits sold separately Softail速 applications
By combining state of the art Dampers with dual air chambers, Progressive Suspension has created the ultimate rear suspension for Softail models. The Airtail is the result of years of R&D and represents the pinnacle of high performance and tunable suspension. Utilizing both a coil and air shock allows the Airtail to ride like traditional high-end shocks while still allowing for extensive height and spring rate tuning. The dual air chambers permit the rider to adjust ride height INDEPENDENT of suspension firmness. This translates to the ideal ride height, without any sort of compromise in ride quality.
620
Office: +44 (0)161 337 4390 • Email: sales@mageurope.eu • www.mageurope.eu
621
Improved stability Smoother ride Available in stock or 1� lower versions High pressure gas charged monotube for consistant damping performance Applications for EX250 and EX650 with more on the way!
The 428 Series monoshock represents the rare combination of high performance and low cost. Designed specifically for the smaller bore sportbikes and adventure touring bikes that are now seeing real riders and real miles. Incorporating proper spring rates and specifically tuned deflective disc dampers combined with a gas charge to prevent oil foaming and wrapped in all aluminum body, the 428 opens up a whole new world of possibilities for this segment of fun to ride machines. Each 428 also utilizes a threaded body for fine tuning spring pre-load to match your riding style and load
622
Improved stability Improved steering response Stylish looks Smoother ride Single units for front of BMW GS1100 & 1150 Pairs for front of Can Am Spyder RS See page 624 & 625 for matched rear shocks
Designed specifically for the front of the BMW 1100 & 1150 as well as Spyder RS. Progressive’s new 435 Series front shocks and 465 Series rear shock help smooth out the ride of these unique machines.
BMW R1100 & 1150GS MODELS
The 435 Series front shocks are a completely new design and are sprung and valved to address the challenges of the BMW Telelever and Can Am double A-arm front suspensions, resulting in improved stability and steering response on both. Can Am Spyder RS FRONT
Office: +44 (0)161 337 4390 • Email: sales@mageurope.eu • www.mageurope.eu
623
5 position rebound adjuster – Adjust to changing conditions and riding styles Threaded body allows for fine adjustments in sag Aluminum Body/Components - Light weight & stylish Hard anodized finish – Durable and corrosion resistant Also available for long swingarm Sportbikes Rebuildable damper New Apps for BMW F650GS, F800GS, Kawasaki Versys, Can-Am Spyder and many other monoshock motorcycles Stock as well as 1” lower versions
The 465 Series represents state of the art high pressure gas monotube shock design. It utilizes a large 46mm bore and deflective disc piston for precise damping. The beefy 16mm hard chrome shaft rides on custom viton seals for low friction and leak free life. The 465 is custom tuned for each application and is completely optimized for each bike, from the damping and spring rate all the way down to the jounce bumper.
624
All of the features of the Standard 465 Series monoshock PLUS the new R.A.P. System (Remote Adjustable Preload) Easily tuned to your weight and riding style Applications for most popular monoshock bikes, including BMW F650GS, F800GS, R1100GS, R1150GS Road Star, KLR650, Triumph Tiger 800XC and V-Strom
The Remote Adjustable Preload allows for easy tuning of the ride height and suspension sag with a simple turn of the RAP machined aluminum knob. Utilizing a hydraulic preload adjuster, the RAP system is buttery smooth and allows quick adjustment for changing loads, passengers and terrain. Includes bracketry where required.
Office: +44 (0)161 337 4390 • Email: sales@mageurope.eu • www.mageurope.eu
625
Progressive rate springs for a comfortable ride and improved load stability Five position spring pre-load adjustment Velocity sensitive damping for a smoother ride Gas charged for damping consistancy Equipped with shock “Sox” to help keep springs and adjusters clean
The 512 Series was the first aftermarket shock made specifically for Utility ATV’s. They have undergone extensive R&D to provide the finest possible suspension for your workhorse vehicle. We use improved spring rates for heavier load stability and handling over rough terrain as well as increased length for more travel and ground clearance. The 512 Series comes with an adjustable spring preload to accommodate different loads (i.e. mounting a plow or carrying a hay bale). Also included is our Shock “Sox” to help keep dirt and mud out of the spring and to keep the adjusters clean.
626
Available in STANDARD or HEAVY DUTY spring rates Twin tube, high pressure nitrogen charged damper Easy to tune via threaded preload adjusters Beefy 16mm Shaft Reduces rear end bucking! Rhino and RZR applications
High performance UTV suspension does not have to mean a high price tag! Our latest effort is sure proof of this sort of thinking. The 425 Series shocks are aimed at the user who has added a rear cage and seating, is hauling heavy loads or who simply wants a better performing suspension without having to break the bank.
Office: +44 (0)161 337 4390 • Email: sales@mageurope.eu • www.mageurope.eu
627
Improved resistance to front brake dive Improved front end stability & cornering Improved bottoming control Lifetime limited warranty The VERY BEST in Touring suspension performance! Apps for: 1984 and up Harley Touring Bikes 2000 and up Harley Softail Models 2009 and up Harley Tri Glide Models 2001 and up Honda Goldwing Models
Kit converts dual damper rod, AND damper rod / cartridge forks to true high performance Monotube Cartridge Forks! This kit contains a pair of high performance, gas charged Mono-tube fork cartridges complete with a set of our famous fork springs and is a direct internal component replacement. No modification to forks is required.
628
Improved resistance to front brake dive Improved front end stability & cornering Improved bottoming control Lifetime limited warranty The VERY BEST in Dual Sport suspension performance! Apps for: 2008 and up Kawasaki KLR650
Enjoy improved front end control and ride comfort by converting the archaic dual Damper rod forks to true high performance monotube cartridge dampers. This kit contains a pair of high performance, Gas charged monotube fork cartridges complete with a set of our KLR proven fork springs. Direct internal component replacement for all 2008 and up KLR650 models. No modification to your forks are required.
Office: +44 (0)161 337 4390 • Email: sales@mageurope.eu • www.mageurope.eu
629
Available in STANDARD or HEAVY DUTY Progressive rate Stock height or lowered Lowered height kits included 1” & 2” drop parts Precision wound - Lifetime warranty
The ‘Original’ Progressive Rate Fork Springs soak up the small road bumps, yet are firm enough to absorb the molar-rattling ones. Spring rates have been chosen to reduce front end “dive” during braking, yet still provide excellent ride comfort. Better yet, we warranty our fork springs for life! Progressive Rate Fork Springs have several advantages over straight rate springs. A straight rate spring only offers linear resistance to compression and is a compromise. For example, if you have a 20lb straight rate spring, it will take 20lbs of force to compress the spring one inch. It will take 20 more lbs of force to compress it the next inch, and so on, until the end of the travel. A Progressive Rate Spring has the advantage of a rising rate resistance to compression. For example, a 15lb - 25lb Progressive Rate Spring will take 15lbs to compress it the first inch, 17lbs more the next inch, and so on, until the end of the travel, taking 25lbs more to compress it the last inch. The benefit of this is that the spring can be soft enough at the start of the travel to offer a “plush” ride, yet be firm enough at the end of the travel to soak up the big bumps.
Straight Rate Spring
630
Progressive Rate Spring
1 inch 100lbs
1 inch 60lbs
1 inch 100lbs
1 inch 90lbs
1 inch 100lbs
1 inch 110lbs
1 inch 100lbs
1 inch 140lbs
Simple DROP-INTM installation! Up to 2” of height reduction No special tools required
Forget everything you know about lowering motorcycle front ends, Progressive Suspension has just completely changed the game! Our new DROP-IN fork Lowering Kits have transformed a once messy, and time consuming install into a cake walk. Pull up to two inches out of the front end of your bike without the hassle of disassembling the forks or even changing out the oil and the whole process can be done with basic tools. Shorter springs and Progressive’s new secondary compensation spring make short work of the formerly complicated act of lowering your front end
* WARNING! Installing a lowering kit WILL decrease initial ground clearance. The motorcycle will be lower to the ground and care should be taken to avoid bottoming, especially over bumps or in turns. To maintain proper balanced geometry, we recommend lowering the motorcycle in the rear the same amount as the front.
Office: +44 (0)161 337 4390 • Email: sales@mageurope.eu • www.mageurope.eu
631
Simple Install Forged Steel Construction 1993 and up HD Touring Models Does NOT impact ground clearance Precision Rod End Bearings
1993-2008 Touring Models
Inexpensive & easy to install solution to handling challenges inherent in touring models. Compact design does not hang below the frame or impede ground clearance. Motor/ swingarm assembly stays aligned with chassis while avoiding the introduction of unnecessary vibration to the rider. Now available for 2009 and later models.
632
2009 and up Touring Models
SOFTAIL® LOWERING KIT P30-5046C (‘89-’99, Chrome) P30-5048C (‘00 and up, Chrome)* Economical lowering Kits available for all Softails *Except 07 FXSTD, 05-10 FLSTN, 09-10 FLSTSB, 2010 FLSTFB & 2010 FLSTSE
SWAYBAR ADJUSTER BLOCKS FOR POLARIS RZR A simple and affordable solution to cure the RZR’s tendency to UNDER STEER in and SNAP OVER STEER out of corners. Installs in minutes and instantly improves the cornering ability of your RZR. Billet aluminum block includes hardware and three swaybar mounting positions, allow for fine tuning of handling characteristics.
MINI GAUGE PUMPS A handy source of air pressure for adjusting pressure in your forks and air shocks. Comes complete with flexible hose and integral gauge P-GP3-30 • 0-30psi P-GP3-100 • 0-100psi
P-GP3-60 • 0-60psi P-GP3-300 • 0-300psi
Office: +44 (0)161 337 4390 • Email: sales@mageurope.eu • www.mageurope.eu
633
STANDARD SHOCK TOOL P32-5508 Fits many single and twin shocks. Takes the hassle out of changing springs.
PRELOAD WRENCHES P-SW-1700 This adjustable spring preload spanner fits most adjusters found on single shocks. P-SW-783 Compact size & 3/8” drive P-SW-784 For use with a 3/8” ratchet. Works on any OE or Progressive Softail shock. Advantages: Used with a ratchet, easier to use than the stock OEM tool (and inexpensive too!)
P32-5507 SPRING COMPRESSOR Assembly/Disassembly tool for Softails.
SAFETY WIRE P-SW-360 .032in P-SW-361 .025in (shown) The finest stainless steel safety wire available. Comes in 1lb cans
SAFETY WIRE STARTER KIT P-SWW-400 • (shown to left) P-SWW-401 • Safety wire and winder only. P-SWW-506 • Washers only, 6mm (18 pieces) P-SWW-508 • Washers only, 8mm (18 pieces) P-SWW-510 • Washers only, 10mm (18 pieces) Kit uses stainless washers and wire to make safety wiring a “no-drilling” operation.
P-TRK-2 Includes a 16 gram CO2 cartridge (standard on our other kits is a 12 gram cartridge). Complete with both plugs and patches for tube and tubeless type tires. All this enclosed in a durable nylon pouch.
P-FOL-1 Allows you to make accurate fluid level adjustments to your fork oil. Has easy to read calibration marks and sliding marker.
P-FOL-2 This tool is the quickest and most accurate way to set the oil in each fork leg. Designed for the professional or do-it-yourselfer. Works on most forks.
P-TRCL-2 Kit P-TRC-2 Kit
TIRE REPAIR REFILLS TRK-2 Kit
P-RPT-1 (Not shown) Replacement patches.
P-RPK-3 Kit
P-RC-2 (Not shown) Threaded CO2 cartridges - 16g P-RCN-3 (Not shown) Non-threaded CO2 cartridges - 12g P-RPK-3 (Shown at right) Replacement plugs and cement.
634
P-TRC-2 for tube type tires P-TRCL-2 for tubeless tires Compact kit in rigid plastic box, complete with patches or plugs, glue, adapter hose & CO2 cartridges.
All of the features of the standard 465 Series monoshock PLUS the new R.A.P. System (Remote Adjustable Preload) Easily tuned to your weight and riding style Applications for most popular monoshock bikes, including BMW, KLR650 and V-Strom
The Remote Adjustable Preload allows for easy tuning of the ride height and suspension sag with a simple turn of the RAP machined aluminum knob. Utilizing a hydraulic preload adjuster, the RAP system is buttery smooth and allows quick adjustment for changing loads, passengers and terrain. Includes bracketry where required.
Office: +44 (0)161 337 4390 • Email: sales@mageurope.eu • www.mageurope.eu
635
465 Series rear shock fitment for Kawasaki KLR650, V-Strom 650 & 1000 as well as other makes and models. 435 Fitment for front of BMW R1100 & R1150GS/GSA models High pressure gas monotube – Ultimate performance 465 Series inludes 5 position rebound adjuster – Tune to changing conditions and riding styles Threaded body allows for fine adjustments in sag Aluminum body/components - Light weight & stylish Rebuildable damper Stock as well as 1” lower versions
The 435 & 465 Series represent state of the art high pressure gas monotube shock design and utilize deflective disc pistons for precise damping control. The beefy 16mm hard chrome shaft (14mm on 435) rides on custom seals for low friction and a leak free life. Both are custom tuned for your specific application from the valving and spring rate all the way down to the highly engineered jounce bumper.
636
Improved resistance to front brake dive Improved front end stability & cornering Improved bottoming control Lifetime Limited Warranty The VERY BEST suspension performance for the late model KLR650!
Kit converts dual damper rod forks to true high performance Monotube Cartridge front suspension! Contains a pair of high performance, gas charged monotube fork cartridges complete with a set of our famous fork springs. Direct internal component replacement for all KLR650’s from 2008 and later. More applications in the works.
Office: +44 (0)161 337 4390 • Email: sales@mageurope.eu • www.mageurope.eu
637
Progressive rate Increased bottoming control Precision wound - Lifetime Limited Warranty
The ‘Original’ Progressive Rate Fork Springs soak up the small road bumps, yet are firm enough to absorb the molar-rattling ones. Spring rates have been chosen to reduce front end “dive” during braking, yet still provide excellent ride comfort. Better yet, we warranty our fork springs for life! Progressive Rate Fork Springs have several advantages over straight rate springs. A straight rate spring only offers linear resistance to compression and is a compromise. For example, if you have a 20lb straight rate spring, it will take 20lbs of force to compress the spring one inch. It will take 20 more lbs of force to compress it the next inch, and so on, until the end of the travel. A Progressive Rate Spring has the advantage of a rising rate resistance to compression. For example, a 15lb - 25lb Progressive Rate Spring will take 15lbs to compress it the first inch, 17lbs more the next inch, and so on, until the end of the travel, taking 25lbs more to compress it the last inch. The benefit of this is that the spring can be soft enough at the start of the travel to offer a “plush” ride, yet be firm enough at the end of the travel to soak up the big bumps.
638