EPOXIES STR - General Purpose Resin
General Purpose Epoxy has excellent pot life and cure-time control. When selecting a hardener consider the minimum temperature expected during application and the required pot life. Combine different System Three General Purpose Epoxy Hardeners to provide a continuous range of cure times. Refer to The Epoxy Book to make a proper selection. Recommended Uses: System Three General Purpose Epoxy works great for wood construction and repair, for gel coat blister repair, and for general ﬁberglass repair. Use at a simple 2:1 volume ratio with any of the three hardeners. Use at temperatures as low as 35°F with no limitations on humidity. The medium-low viscosity of System Three General Purpose Epoxy allows for use “as is” for coating and ﬁberglass work. Combine with different ﬁllers to make adhesive, ﬁlleting and fairing compounds. Tired of the hassle of ﬁllers? Use the SilverTip Marine Epoxy Series products. Package Sizes: Pints (hardeners only) Quarts Half-gallons Gallons 2.5 Gallons (hardeners only) 5 Gallons Half-drums (hardeners only) Drums Available Colors: Amber - We offer epoxy dispersed pigments in black, white, red, yellow, blue, brown, and green so you can make your own colored epoxy.
T-88 Structural Epoxy Adhesive
T-88 is a high-performance, non-brittle, two-part epoxy adhesive designed to give superior results under adverse conditions. The adhesive may be used without modiﬁcations in normally ﬁtted joints, and will cure in any thickness without shrinkage. T-88 is clear amber and becomes virtually invisible when varnished. T-88 exhibits outstanding adhesion and permanence on a wide variety of materials, and is endorsed by leading designers, builders and organizations. Recommended Uses: For well over 25 years T-88 has been the most widely used structural adhesive for marine and general woodworking use in the United States. Mixed at a 1:1 by volume ratio, T-88 will cure at temperatures as low as 35°F. When fully cured, it is unaffected by water, oil, kerosene, and many other chemicals. It will not stain wood and is immune to fungus and rot. T-88 is unique in that it may be applied to damp wood, provided it is worked well into the surface. Package Sizes: (Each kit contains 1-part resin and 1-part hardener) Quart kit (1100K16) Half-gallon kit (1100K20) Gallon kit (1100K24) Two-gallon kit (1100K50) 8.4oz u-TAH™ Cartridge (1100K91) Available Colors: Amber, all sizes; Black: Gallon kits and larger (special order in the u-TAH Cartridge).
Clear Coat Laminating Resin SB-112 Surfboard Resin
SB-112 is a clear, almost water white high-modulus epoxy system, UV-resistant for maintaining longer surface gloss. Unlike many epoxy systems, SB-112 will cure to a clear, glossy, blush-free surface. Recommended Uses: SB-112 is specially formulated for use in building and repairing sail and surfboards over polystyrene cores. It can also be used for coating and composite laminating. SB-112 is unique in that polyester resins and gel coats may be bonded to it without the use of “tie-coats”. We recommend that polyester be bonded onto freshly sanded SB-112 epoxy within 48 hours of cure. Package Sizes: (Each kit contains 2-parts resin and 1-part hardener) 1-1/2 pint kit (0400K40) 1-1/2 quart kit (0400K42) 3 quart kit (0400K44) 1-1/2 gallon kit (0400K46) 3 gallon kit (0400K52) 7-1/2 gallon kit (0400K58) 15 gallon kit (0400K62) Available Color: Light Amber, almost clear
Clear Coat is an extremely low viscosity, water white, “penetrating” epoxy system. Clear Coat cures to a brilliantly clear, very tough ﬁnish without the usual “amine blush” associated with some epoxy resin ﬁlms. Clear Coat contains no volatile solvents. Recommended Uses: Clear Coat is ideal for clear coating wood, and the wetting out of ﬁberglass cloth for bright ﬁnished boats. Use as a build coat for clear linear polyurethane or varnish coatings and as a penetrating ﬁrst coat for blister repair on ﬁberglass boats. Use also for those applications that require a long pot life and low viscosity. Use Clear Coat as the sole epoxy system to make wood strip canoes and kayaks. Protect Clear Coat from moisture during cure to avoid water spotting. Package Sizes: (Each kit contains 2-parts resin and 1-part hardener) 1-1/2 pint kit (0600K40) 1-1/2 quart kit (0600K42) 3 quart kit (0600K44) 1-1/2 gallon kit (0600K46) 3 gallon kit (0600K52) 7-1/2 gallon kit (0600K58) 15 gallon kit (0600K62) Available Colors: Clear - We offer epoxy dispersed pigments in black, white, red, yellow, blue, brown, and green so you can make your own colored epoxy.
EPOXIES About The SilverTip Marine Epoxy Series
Using the latest composites technology System Three Resins has developed the next generation of epoxy products – The SilverTip Marine Epoxy Series. Until now the approach to using marine epoxy was to combine one general-purpose resin with a variety of hardeners and obnoxious ﬁllers to produce the various adhesives, coatings, putties and compounds needed in boat construction and repair. This “chemistry set” approach could give good results but was all too often messy, inconsistent and unpredictable. With the SilverTip Marine Epoxy Series, System Three has eliminated the use of a general-purpose resin, and instead designed a separate resin system for each speciﬁc application found in boatbuilding and repair. This makes sense since the performance requirements of an adhesive are not the same as those for a coating or compound. All of the ﬁllers have been properly selected and correctly combined with the resin, eliminating guesswork and trial and error mixing. The results are products that are consistent and exceptionally easy to use. Plus the performance of each product in the SilverTip Series is optimized for its speciﬁc application.
QuikFair is a lightweight, microballoon-ﬁlled, fast-curing two-part epoxy fairing putty with excellent moisture resistance. The two color-coded parts have a non-sagging, butter-like consistency and are easily mixed to form a third color. At 25°C (77°F) QuikFair is sufﬁciently cured to be hand-sanded in 3 hours or machine sanded in 4 hours. This allows the user to apply three coats each 24 hours in a standard eight-hour shift or six in a round-the-clock basis.
SilverTip Laminating Resin
SilverTip Laminating Resin is a medium-low viscosity, liquid epoxy resin system that has been optimized for coating and reinforcing fabric saturation in wood-composite boatbuilding. It will outperform any other product in these applications. SilverTip Laminating Resin is designed for use with ﬁberglass, Kevlar, Dynel and graphite as well as on bare wood. It has superior wet-out characteristics with little tendency to foam or trap air. Both the resin and hardener are nearly colorless and are used in an easy 2:1 volumetric ratio. SilverTip Laminating Resin cures to a brilliant blush-free ﬁlm with either the fast or slow hardener eliminating secondary bonding concerns as experienced with other epoxies. The working time is longer than most boat building epoxies without extending cure time. The cured ﬁlm is tough and resilient with better heat resistance than other epoxies cured at room temperature. Fillers, wood ﬂour, and bulking agents can be combined with SilverTip Laminating Resin, however, we suggest using the other members of the SilverTip Series for adhesive, ﬁlleting and fairing applications. Recommended Uses: SilverTip Laminating Resin has been formulated as an optimized system for coating and ﬁberglassing wooden boats, the repair of ﬁberglass boats and for use with carbon ﬁber sporting goods & autobody parts. Application: Use at a simple 2:1 volume ratio with either the fast or slow hardener. Use at temperatures as low as 35ºF with no limitations on humidity. Even at lower temperatures and higher humidity this resin will not blush on curing. The medium-low viscosity of SilverTip Laminating Resin wets out ﬁberglass cloth quickly and allows for use “as is” for either coating or ﬁberglass work. Package Sizes: Pints (hardeners only) Quarts Half-Gallons Gallons 2.5 Gallons
Recommended Uses: Use QuikFair on both ﬁberglass and wood-epoxy boats above or below the waterline. Kit Sizes: (Each kit contains 2-parts resin and 1-part hardener) 1-1/2 pint kit (1400K40) 1-1/2 quart kit (1400K42) 3 quart kit (1400K44) 1-1/2 gallon kit (1400K46) 3 gallon kit (1400K52) 7-1/2 gallon kit (1400K58) 15 gallon kit (1400K62) 6.4oz Universal Cartridge™ (1400K91) Available Color: Resin (part A): White Hardener (part B): Brown Mixed Color: Tan
MetlWeld is a super tough epoxy adhesive designed to bond dissimilar materials such as steel to wood. MetlWeld exhibits excellent elastic properties and superior bond strength while remaining rigid. MetlWeld will bond to stainless steel, galvanized steel, aluminum, copper, glass, ceramic, neoprene rubber and most porous surfaces. Recommended Uses:
MetlWeld will bond metals to metal, wood, stone, concrete, and even glass. Package Sizes: (Each kit contains 1-part resin and 1-part hardener) Half-pint kit (1200K10) Pint kit (1200K14) Quart kit (1200K16) Half-gallon kit (1200K20) Two-gallon kit (1200K50) Ten-gallon kit (1200K60) Available Colors: Gray
EPOXIES SilverTip EZ-Fillet
GelMagic is a toughened, non-sagging, two component, structural epoxy adhesive designed for superior bonding to wood and most porous materials. It is unique in that it starts as two self-leveling liquids, which form a soft, thixotropic, sag-resistant paste when mixed. Measuring is easily accomplished by either volume or weight. GelMagic requires no additional modiﬁcation with ﬁllers and can be applied to vertical and overhead surfaces without running, eliminating the mess and waste associated with other epoxies. GelMagic exhibits exceptionally high peel strength and employs a state Recommended Uses: EZ-Fillet is speciﬁcally designed for both cosmetic and structural ﬁllets in of the art, two-phase epoxy morphology, which creates an adhesive bond that is tougher, more resistant to embrittlement and has better stitch- and-glue wooden boat construction. elevated temperature properties than other room temperature cured epoxy adhesives. GelMagic Application: can be post-cured up to 140°F for even greater performance. Two Use at a simple 2:1 volume ratio. Once mixed and applied EZ Fillet cures overnight to an exceptionally strong ﬁllet, which may be sanded for hardeners are available: Regular and Slow (for extra-long working ﬁberglass tape. Alternatively, the tape can be applied after EZ Fillet starts time). See the Technical Data Sheet (link to TDS) for more detailed to get stiff. Use SilverTip Laminating Resin for this purpose and work EZ information. Fillet under the wet tape for a smooth, bubble-free composite. Another way to achieve a smooth ﬁllet is to let EZ Fillet Recommended Uses: Speciﬁcally designed for optimum adhesive properties. Not a generalget fairly stiff and then smooth with a rag soaked in paint thinner. Sand lightly after cur- purpose resin made for coating and then modiﬁed with ﬁller to act as an adhesive. When fully cured, it is unaffected by water, oil, kerosene, and ing before applying tape. many other chemicals. It will not stain wood and is immune to fungus and rot. GelMagic is ideal for stitch-and-glue, plywood, strip built and glued Kit Sizes: lap strake construction. Also use GelMagic as a high strength, gap ﬁlling, (Each kit contains 2 parts resin and 1 part waterproof adhesive for general woodworking and architectural applicahardener) tions. 1-1/2 Pint Kit (1430K40) 1-1/2 Quart Kit (1430K42) Application: 3 Quart Kit (1430K44) Mixed at a 2 to 1 by volume ratio, GelMagic will cure at temperatures as 1-1/2 Gallon Kit (1430K46) low as 35°F. Two color component system aids in determining a complete 3 Gallon Kit (1430K52) mix. Mixes to a pre-thickened, non-sagging state. No ﬁllers needed. 7-1/2 Gallon Kit (1430K58) Kit Sizes: 15 Gallon Kit (1430K62) Available Color:Resin (part A): Red (Each kit contains 2 parts resin and 1 part hardener) Hardener (part B): Green Mixed Color: Regular Brown EZ-Fillet is a wood ﬂour-ﬁlled two-part putty speciﬁcally designed for stitch-and-glue wooden boat construction. Its ketchup-like, self-leveling consistency allows it to be measured by volume or weight. The resin (part A) is brick red in color while the hardener (part B) is a deep, dark green. A rich brown wood tone results when the two parts are combined indicating complete mixing. The putty thickens after mixing to form an easy to spread thixotropic compound which will not run or sag.
1-1/2 Pint Kit (1230K40) 1-1/2 Quart Kit (1230K42) 3 Quart Kit (1230K44) 1-1/2 Gallon Kit (1230K46) 3 Gallon Kit (1230K52) 7-1/2 Gallon Kit (1230K58) 15 Gallon Kit (1230K62) 6.4 oz. u-TAH Cartridge™ (1230K91) Slow: 1-1/2 Pint Kit (1231K40) 1-1/2 Quart Kit (1231K42) 3 Quart Kit (1231K44) 1-1/2 Gallon Kit (1231K46) 3 Gallon Kit (1231K52) 7-1/2 Gallon Kit (1231K58) 15 Gallon Kit (1231K62) 6.4 oz. u-TAH Cartridge™ (1231K91)
EPOXIES Sculpwood Moldable Epoxy Putty
SculpWood is the epoxy putty component of The EndRot System. SculpWood is a 2-component, solvent free, kneadable epoxy resin putty. It is moldable, carvable, lightweight, strong, and exhibits excellent adhesion to a variety of substrates. It is easily sanded and will accept paint, screws and nails. It is most commonly used in conjunction with System Three RotFix, a low viscosity wood sealer and consolidant. For more details about the EndRot System see Wood Restoration under Markets We Serve. Recommended Uses: Use SculpWood for replacing missing sections of windowsills, frames and furniture or for adding new sections to existing structures. Package Sizes: (Each kit contains 1-part resin and 1-part hardener) 4oz kit (1600K06) Quart kit (1600K16) Half-gallon kit (1600K20) Two-gallon kit (1600K50) Ten-gallon kit (1600K60) Available Color: Medium Brown
Rot Fix is an easy to use, low viscosity epoxy wood sealer, primer, and consolidant for repair and restoration of rotted, deteriorated, dried out or spongy wood. RotFix is a component of The EndRot System. It creates a, sound, waterproof base for repair and restoration ﬁller putty. A unique measuring/application bottle is included with each 24 ounce RotFix kit. With this bottle you can accurately measure, mix and apply RotFix in batches from two ounces to 7 ounces. For more details about the EndRot System see Wood Restoration under Markets We Serve. Recommended Uses: Use Rot Fix to penetrate deep into deteriorated and rotted wood creating a strong, solid base for restoration. After Rot Fix application, replace missing sections with System Three SculpWood. Package Sizes: (Each kit contains 2-parts resin and 1part hardener) 1-1/2 pint kit (1500K40) 1-1/2 quart kit (1500K42) 3 quart kit (1500K44) 1-1/2 gallon kit (1500K46) 3 gallon kit (1500K52) 7-1/2 gallon kit (1500K58) 15 gallon kit (1500K62) Available Color: Brown
MirrorCoat is a pourable, self-leveling bar and tabletop coating. It works well on many surfaces such as wood, ceramics, plaster, masonry and some plastics. MirrorCoat cures to a glossy, smooth ﬁnish that is scratch and stain resistant. Cured MirrorCoat is waterproof and unaffected by alcohol. Recommended Uses: Follow the detailed application instructions in the MirrorCoat brochure to achieve outstanding results on bar tops and tables. Also use as a decoupage coating on cloth, leather, photos and other objects. Package Sizes: (Each kit contains 2-parts resin and 1-part hardener) 1-1/2 pint kit (0500K40) 1-1/2 quart kit (0500K42) 3 quart kit (0500K44) 1-1/2 gallon kit (0500K46) 3 gallon kit (0500K52) 7-1/2 gallon kit (0500K58) 15 gallon kit (0500K62) Available Colors: Clear We offer epoxy dispersed pigments in black, white, red, yellow, blue, brown, and green so you can make your own colored epoxy.
Quick Cure 5
Quick Cure-5 is the standard quick setting “ﬁve minute epoxy” system. Mix at a 1:1 by volume ratio. Quick Cure is ideal for all small jobs requiring a strong bond and rapid cure. Quick Cure is highly water resistant but not waterproof. Quick Cure is quite thick, but is easily measured by squeezing equal sized lumps from the convenient application bottles. Recommended Uses: Use Quick Cure for installing bungs, repairing missed staple holes prior to ﬁberglassing, “tack welding” wood, and for those other glue jobs, which require a fast cure. Do not use below the water line unless protected by an over coating like SilverTip Laminating Resin, STR General Purpose Epoxy, Clear Coat, etc. Available Colors: Amber, all sizes; Black: Gallon kits and larger u-TAH Cartridge available in black, special order only, minimums apply. Package Sizes: (Each kit contains 1-part resin and 1-part hardener.) Quart kit (1000K16) Half-gallon kit (1000K20) Gallon kit (1000K24) Two-gallon kit (1000K50) 8.4oz u-TAH™ Cartridge (1000K91)
EPOXIES WEST SYSTEM
WEST SYSTEM epoxy is a high-quality, two-part epoxy formulated and manufactured by Gougeon Brothers, Inc. It bonds to ﬁberglass, wood, metal, fabrics, and other composite materials and is easily modiﬁed for a wide range of coating and adhesive applications. It is used for construction and repairs requiring superior moisture resistance and high-strength, and is especially suited for marine applications. WEST SYSTEM products provide a complete system of epoxy resin anhardeners, dispensers, ﬁllers, additives, reinforcing materials, application tools and instructional publications.
Balanced epoxy performance
WEST SYSTEM epoxy is designed for boatbuilding and repair by experienced builders and formulators who know the engineering and the chemistry required for today’s high-performance composite structures. During more than thirty years of developing marine epoxies, we have continued to formulate, test and improve WEST SYSTEM resin and hardeners to create the most reliable and well balanced epoxy system available today. Potential resin and hardener formulas, ingredients and combinations are tested to compare fatigue strength, compression strength, glass transition temperature, and peak exotherm. Additionally, qualiﬁed samples are tested for hardness, tensile strength, tensile elongation, tensile modulus, ﬂexural strength, ﬂexural modulus, heat deﬂection temperature, impact resistance and moisture exclusion effectiveness. Thorough testing such as this insures that any change in a formula will improve one or more of a product’s characteristics without diminishing any characteristics.
If the containers are kept sealed when not in use WEST SYSTEM resins and hardeners should remain usable for many years. Over time, 105 Resin will thicken slightly and will therefore require extra care when mixing. Hardeners may darken with age, but physical properties are not affected by color. Mini Pumps may be left in containers during storage. It is a good idea, after a long storage to verify the metering accuracy of the pumps and mix a test batch to assure proper curing before applying epoxy to your project.
205 Fast Hardener
205 Fast Hardener is a medium-viscosity epoxy curing agent. It is used in a majority of situations, at lower temperatures and to produce a rapid cure that develops its physical properties quickly at room temperature. When mixed with the 105 Resin in a ﬁve-part resin to one-part hardener ratio, the cured resin/hardener mixture yields a rigid, high-strength, moisture-resistant solid with excellent bonding and coating properties. Not intended for clear coating.205 Hardener must be mixed in the correct ratio of 5 parts by weight of 105 Resin to 1 part by weight of 205 Hardener.
206 Slow Hardener
206 Slow Hardener is a low-viscosity epoxy curing agent for use when extended working and cure time is needed or to provide adequate working time at higher temperatures. When combined with 105 Resin in a ﬁve-part resin to one-part hardener ratio, the cured resin/hardener mixture yields a rigid, high-strength, moisture-resistant solid with excellent bonding and coating properties. Not intended for clear coating.206 Hardener must be mixed in the correct ratio of 5 parts by weight of 105 105 Epoxy Resin 105 Resin is the base material of the WEST SYSTEM family of products, Resin to 1 part by weight of 206 Hardener. on which all of the WEST SYSTEM compounds are built. The resin is a clear, pale yellow, low-viscosity liquid epoxy resin. Formulated for use 207 Hardener with WEST SYSTEM hardeners, it can be cured in a wide temperature This hardener was especially developed for use with WEST SYSTEM range to form a high-strength solid with excellent moisture resistance. It Brand 105 Resin in coating applications where an exceptionally clear, is designed speciﬁcally to wet out and bond with wood ﬁber, ﬁberglass, moisture-resistant, natural wood ﬁnish is desired. Cures to a light amber reinforcing fabrics and a variety of metals. An excellent adhesive, 105 color, similar to traditional spar varnishes. An ultraviolet inhibiting additive will bridge gaps and ﬁll voids when modiﬁed with WEST SYSTEM ﬁllers improves the resistance of a WEST SYSTEM 105/207 mixture to sunand can be sanded and shaped when cured. With roller applications, it light, but the cured epoxy surface will still require the additional protection has excellent thin-ﬁlm characteristics to ﬂow out and self-level without of a quality UV-ﬁltering varnish. 207 is designed to self level for smooth “ﬁsheyeing.” The resin cures clear so that you can achieve a natural ﬁnﬁnishes, and to wet-out and bond fabrics. Although it provides good ish when coating with varnish. It has a relatively high ﬂash point and no physical properties for general bonding applications, it is more difﬁcult to strong solvent odor, making it safer to work with than polyesters. Resin thicken and less cost effective for this purpose than 205 or 206 Hardenviscosity is approximately 1000 cP (centipoise) at 72°F (22°C). ers. It’s also used for laminating veneers where bleed through at joints WEST SYSTEM epoxy resin and hardeners are packaged in three may be exposed to sunlight.207 Hardener must be mixed in the correct “Group Sizes.” ratio of 3 parts by volume of 105 Resin to 1 part 207 Hardener. For each container size of resin, there is a corresponding sized 209 Extra Slow Hardener container of hardener. 209 Extra Slow Hardener is formulated for use with WEST SYSTEM When purchasing resin Brand 105 Resin for general coating and bonding applications in and hardener, be sure all extremely warm and/or humid conditions or when extended working containers are labeled time is desired at room temperature. Provides approximately twice the with the same Group Size working time of 206 Slow Hardener. Forms a clear, amber-colored solid letter (A, B or C). The with good physical properties and moisture resistance for bonding and 300 Mini Pumps can be coating applications. Not intended for clear coating.209 Hardener must conﬁgured to ﬁt anyGroup be mixed in the correct ratio of 3 parts by volume of 105 Resin to 1 part Size. 209 Hardener. WEST SYSTEM 105 epoxy is available in 4 pack sizes: A, B, C or E (1kg, 5kg, 25kg or 225kg respectively).
EPOXIES 300 MINI PUMP SET 300 Mini Pumps are designed for convenient and accurate metering of all Group Size A, B and C WEST SYSTEM resin and hardeners. They mount directly on the resin and hardener containers and eliminate the mess involved with measuring by weight or volume. 300 Mini Pumps are calibrated to deliver the proper working ratio with one full pump stroke of resin for each one full pump stroke of hardener. The 300 Mini Pumps Set contains one resin pump and two hardener pumps. 105/205-206 pumps deliver approximately 0.8 ﬂ oz of resin/hardener with one full stroke of each pump. 105/207-209 pumps deliver approximately 0.9 ﬂ oz of resin/hardener with one full stroke of each pump. As packaged, the pumps are ready to install on the Group Size B containers. A package of extension tubes for Group Size A containers is included with the set. Group Size C extension tubes are included in the 105-C Resin and in the 207-SC or 209-SC packages.
FILLERS Adhesive Fillers vs. Fairing Fillers
Fillers are used to thicken the basic resin/hardener mixture for speciﬁc applications. Each ﬁller possesses a unique set of physical characteristics, but they can be generally categorized as either Adhesive (high-density) or Fairing (low-density). Adhesive ﬁller mixtures cure to a strong, hard-to-sand plastic useful in structural applications like bonding, ﬁlleting and hardware bonding. Fairing ﬁller mixtures cure to light, easily sandable material that is generally used for cosmetic or surface applications like shaping, ﬁlling or fairing.
If necessary, you can combine different group sized-as long as all of the pumps have a yellow head. To avoid confusion and possible off-ratio metering, 300 Mini Pumps have yellow heads, which should not be used in with any older pumps with a white head (301 and 303 pumps). Made of durable polypropylene, the pumps give years of dependable service. Read and follow the priming, ratio veriﬁcation and operating instructions that come with the pumps.
LARGE CAPACITY PUMPS 306-25 Metering Pump
For metering larger quantities of 105 Resin and 205 or 206 (5:1 ratio) Hardeners. The 306-25 Pump will reduce mixing time and waste on large projects. A carrying handle allows you to move the pump where the works is. Reservoirs hold one gallon of resin, one quart of hardener. Dispenses approximately 0.5 ﬂ oz of resin/hardener per pump stroke (about 1 qt per minute). Can be converted to a 3:1 ratio.
306-23 Metering Pump
Similar to 306-25 Metering Pump described above. For metering 105 Resin and 207 Special Coating or 209 Extra Slow (3:1 ratio) Hardeners. Can be converted to a 5:1 ratio. Rebuild Kit Includes seals, balls, gaskets, springs, high-rise tubes with ferrules and new resin and hardener reservoirs with lids. 306-25 For 306-25 (5:1 ratio) metering pump. 306-23 For 306-23 (3:1 ratio) metering pump. 306-K For older 306 (5:1) ratio pump. 306-3K For older 306-3 (3:1) ratio pump.
309 High-Capacity Gear Pump
For use with 205 or 206 (5:1 ratio) Hardeners. The 309 Gear Pump is designed and built by Gougeon Brothers for large projects and manufacturing operations. The home builder and professional alike will enjoy the efﬁciency of this high-volume pump. With continuous rotation of the crank, the metered resin and hardener can be delivered at up to ﬁve quarts per minute. Positive shutoff prevents resin and hardener loss through dripping spouts. Reservoirs hold two gallons of resin, one gallon of hardener.
309-3 High-Capacity Gear Pump
Similar to 309 High-Capacity Gear Pump described above. For metering 105 Resin and 207 Special Coating or 209 Extra Slow (3:1 ratio) Hardeners.
ADHESIVE FILLERS 403 Microﬁbers
403 Microﬁbers, a ﬁne ﬁber blend, is used as a thickening additive with resin/hardener to create a multi-purpose adhesive, especially for bonding wood. Epoxy thickened with microﬁbers has good gap-ﬁlling qualities while retaining excellent wetting/penetrating capability. Color off-white. 6.0 oz.20.0 oz. 20.0 lb.
404 High-Density Filler
404 High-Density ﬁller is a thickening additive developed for maximum physical properties in hardware bonding where high-cyclic loads are anticipated. It can also be used for ﬁlleting and gap ﬁlling where maximum strength is necessary. Color: off-white.15.2 oz.30.0 lb.43.0 oz.
405 Filleting Blend
This strong, wood-toned ﬁller is good for use in glue joints and ﬁllets on naturally ﬁnished wood. It mixes easily with epoxy and lets you create ﬁllets that are smooth and require little sanding. Its color is a consistent brown, so 405 can be used to modify the shade of other WEST SYSTEM ﬁllers.8.0 oz.
406 Colloidal Silica
406 Colloidal Silica is a thickening additive used to control the viscosity of the epoxy and prevent epoxy runoff in vertical and overhead joints. 406 is a very strong ﬁller that creates a smooth mixture, ideal for general bonding and ﬁlleting. It is also our most versatile ﬁller. Often used in combination with other ﬁllers, it can be used to improve the improve strength, abrasion resistance, and consistency of fairing compounds, resulting in a tougher, smoother surface. Color: off-white. 5.5 oz 10.0 lb..
APPLICATION TOOLS 800 Roller Covers
Thin polyurethane foam roller covers are ideal for epoxy, paint and varnish application. Can be cut into shorter widths to match the application area and cut into brushes for tipping off fresh coats of epoxy. Covers are 7” wide and sold in packages of two.
801 Roller Frame
Adjustable roller cover frame holds 7” full-width covers and covers cut down to as narrow as 2” wide. Ideal for narrow strips and tight areas as well as large areas.
420 Aluminum Powder
420 Aluminum Powder provides limited protection from ultraviolet light in areas that will not be protected with other coatings. Can be used as a base for subsequent painting. 420 will increase the hardness and abrasion resistance of the coated surface and improve its moisture resistance. Cures to a metallic gray color. Add to mixed resin/hardener at the rate of 5 to 10% by volume (approximately 6 oz. per B group). 6.0 oz. 16.0 oz.
422 Barrier Coat Additive
A proprietary blend designed to improve cured epoxy’s moisture-exclusion effectiveness. 422 is used as a barrier coating additive to help prevent gelcoat blistering. 422 also increases the epoxy’s abrasion resistance. Cures to a light gray color. Add to mixed resin/hardener at the rate of 15 to 20% by weight-3 tablespoons per 8 ﬂ. oz. epoxy (approximately 32 oz. per B group). 16.0 oz 40.0 oz
423 Graphite Powder
423 Graphite Powder is a ﬁne black powder that can be mixed with WEST SYSTEM epoxy to produce a low-friction exterior coating with increased scuff resistance and durability. Epoxy/graphite is commonly used as a bearing surface, and as a coating on rudders and centerboards, or on the bottoms of racing craft that are dry sailed. It does not provide antifouling qualities. The epoxy/graphite mixture can also be used in teak deck construction to simulate the look of traditional seams and to protect the epoxy from sunlight. Cures to a black color. Add to mixed resin/hardener at the rate of up to 10% by volume (approximately 5.7 oz. per B group). 6.0 oz 12.0 oz.
Color Pigments WEST SYSTEM pigments are epoxy-based liquid colorants used to tint the epoxy mixture to provide an even color base for the ﬁnal ﬁnish system. The colored surfaces also tend to highlight ﬂaws and imperfections. Cured, pigmented epoxy surfaces are not a ﬁnal ﬁnish surface, but require an additional opaque or UV ﬁlter coating for ultraviolet protection. Add to the mixed resin/hardener at a rate of approximately one teaspoon of pigment to 8 ﬂ oz of epoxy. More pigment will increase opaqueness and mixture viscosity. One 4 ﬂ oz bottle will tint approximately 2/3 gal of epoxy. 501 White Pigment. 503 Gray Pigment.
802 Roller Pan
Heavy duty, ﬂexible plastic roller pan allows you to “pop out” epoxy after it has cured so the pan can be reused. Eliminates the need for liners.
803 Glue Brushes
Handy, disposable, 1/2” x 6” glue application brushes with a metal handle. These brushes are useful in a wide variety of small bonding and coating applications.
804 Reusable Mixing Sticks
A practical mixing, application, ﬁlleting, and cleaning tool. Squared, beveled end reaches mixing pot corners for thorough mixing and blending in ﬁllers and for cleaning up excess epoxy. Use rounded end to shape 3/8” radius ﬁllets. Cured epoxy pops off easily, so they can be reused many times. 3/4”-wide x 5-1/2”. Product highlights: 804 Mixing Sticks
Poly Mixing Pots
Cured epoxy easily pops out of these strong, reusable plastic mixing pots. 805 16 oz. pot 806 32 oz. pot
Reusable syringes that can be loaded with epoxy mixture for injecting into tight spots. Ideal for hardware bonding and plywood repairs. Holds about 0.5 ﬂ. oz.
808 Flexible Plastic Spreader
Flexible, double-edged, reusable spreader for ﬂow coating, fairing and ﬁlling applications, and applying fabrics. 31/2” x 6”.
809 Notched Spreader
4” x 4” plastic spreader with 1/8”, 3/16” and 1/4” notches on three sides for quickly applying modiﬁed epoxy at a constant rate. Useful when laminating large panels.
810 Fillable Caulking Tubes
Great for injecting large amounts of epoxy, laying a lengthy bead of epoxy or making ﬁllets. Suitable for reﬁlling until epoxy cures. For use with a standard caulking gun. Holds approximately 10 ﬂ. oz.
EPOXIES 320 Small-Batch Epoxy Scale
Conﬁgured especially for measuring small amounts of epoxy, it allows the accurate measuring of as little as a few drops of epoxy for small projects, up to 4.4 ﬂuid ounces. It can be used for checking the accuraccy of dispensing pumps or when calculating percentages of additives. The digital scale is pre-calibrated and has a range of 0.1 to 150 grams. Structured within a sturdy 5 x 3 x 0.75-inch case, this go-anywhere unit ﬁts nicely into a shirt or jacket pocket. Batteries included. The scale is presented as part of a “starter” kit comprised of dispensing bottles, small mixing sticks, chenille pipe cleaners, and two sizes of small plastic cups. Two-year repair or replacement limited warranty.
WEST SYSTEM pigments are epoxy-based liquid colorants used to tint the epoxy mixture to provide an even color base for the ﬁnal ﬁnish system. The colored surfaces also tend to highlight ﬂaws and imperfections. Cured, pigmented epoxy surfaces are not a ﬁnal ﬁnish surface, but require an additional opaque or UV ﬁlter coating for ultraviolet protection. Add to the mixed resin/hardener at a rate of approximately one teaspoon of pigment to 8 ﬂ oz of epoxy. More pigment will increase opaqueness and mixture viscosity. One 4 ﬂ oz bottle will tint approximately 2/3 gal of epoxy. 501 White Pigment. 503 Gray Pigment.
EpisizeTM Glass Tape
Versatile WEST SYSTEM EpisizeTM 9-oz. woven fabric tapes are ideal for reinforcing chines, hull/deck corners and similar structural applications. When bonded with WEST SYSTEM epoxy, they provide additional tensile strength to resist hairline crack development and abrasion. 729 2” wide x 10’, 50 yd. rolls.
G-FLEX EPOXY REPAIR KITS
650-8 G/ﬂex Epoxy
A toughened, versatile, liquid epoxy for permanent waterproof bonding of ﬁberglass, ceramics, metals, plastics, damp and difﬁcult-to-bond woods. With a modulus of elasticity of 150,000 PSI, it is a bit more ﬂexible than standard epoxies and polyester, but much stiffer than adhesive sealants. This gives G/ﬂex the ability to make structural bonds that can absorb the stress of expansion, contraction, shock and vibration. It is ideal for bonding dissimilar materials. It can be modiﬁed with West System ﬁllers and additives, and used to wet-out ﬁberglass tapes and fabrics. Mixed at a 1:1 ratio, G/ﬂex gives you 45 minutes of working time at room temperature. It reaches an initial cure in 7 to 10 hrs and full cure in 24 hrs. (8 ﬂ. oz. / 236 mL)
650-K G/ﬂex Epoxy Repair Kit
This kit contains 4 ﬂ. oz. G/ﬂex 650 resin, 4 ﬂ. oz. G/ﬂex 650 hardener (8 ﬂ. oz. mixed epoxy), 2 reusable mixing stick/applicators, 2 12-cc syringes, 4 grams Adhesive Filler, 4 mixing cups, 1 pr disposable neoprene gloves, 4 alcohol cleaning pans and complete handling and repair instructions.
655-K G/ﬂex Thickened Epoxy Adhesive Repair Kit
A thickened, easy-to-use epoxy that permanently bonds ﬁberglass, ceramics, metals, plastics, damp and difﬁcult-to-bond woods. G/ﬂex is toughened to make structural bonds that absorb the stresses of expansion, contraction, shock and vibration. Glue resinous woods, exotic woods and a wide range of dissimilar materials. Repair aluminum, plastic and wooden boats, kayaks and canoes. This kit contains 4.5 ﬂ. oz. G/ﬂex 655 resin, 4.5 ﬂ. oz. G/ﬂex 655 hardener (9 ﬂ. oz. of mixed epoxy), 2 reusable mixing stick/applicators, 4 alcohol cleaning pads, 1 pr disposable neoprene gloves, 10 mixing palettes and complete handling and repair instructions.
EPOXIES INDUSTRIAL FORMULATORS’ EPOXIES
Industrial Formulators’ epoxies are formulated systems, meaning that we start with basic epoxy resins manufactured by large chemical companies and modify them to make them suitable for the required end use. In the ﬁrst modiﬁcation (for most products) we reduce the viscosity by the addition of diluents or low viscosity solvents, which are also epoxies. This makes an epoxy system thin enough to wet ﬁberglass cloth, coat wood and bind various ﬁllers to produce gap ﬁlling glues and putties. Because the diluents we use are also epoxies, they are called reactive diluents, reacting with the amines the same way the basic resin reacts, becoming a part of the cured system. Other materials protect against long term embrittlement and improve resiliency and impact resistance. Finally, trace materials designed to lower surface tension, promote substrate wet out, reduce cratering and “ﬁsheye” formation, aid in breaking bubbles and detraining air are used to produce the ﬁnished product.
G-2 Epoxy glue is specially formulated for the best possible bond to resinous and acidic woods such as Oak, Teak, Rosewood, Coco Bolo, and other tropical and exotic woods types where other glues fail. G-2 is an excellent all around adhesive and provides a permanent, waterproof bond for all types of wood, metals, rocks and gems, concrete and non-waxy plastics. The unique variable proportion feature makes G-2 Epoxy Glue the best adhesive to use in a wide range of applications from ﬂy rods to golf clubs, laminated structural beams to deck construction. 375ml kit 750ml Kit 1.5 Litre Kit 3 Litre Kit6/ 12/ 30/ 60/ 300 Litre kits are available
G-R is a unique blend of high strength epoxies with man made rubber. The combination results in a fexible bonding agent with adhesive properties greater than its component parts. G-R has a very high bond strength. It is mixed at a simple 1:1 mix ratio. G-R is very ﬂeiible and has energy absorption toughness. It is also water resistant. G-R is often used to bond dissimilar materials or materials to which conventional adhesives will not bond such as copper, aluminum ( and alloys of these materials ) and many advanced composite materials 250ml kit 500ml Kit 1 Litre Kit 2 Litre Kit 8/ 20/ 40/ 400 Litre kits are available
G-1 Epoxy Glue is the easiest to use, clear, water proof adhesive with a room temperature cure. Wooden aircraft builders and restorers depend on G-1 because of its strength, heat & chemical resistance. G-1 requires no clamping pressure and is an excellent gap ﬁller. Mix it with sawdust, antisag powders, micro balloons and mini ﬁbers to make gels, putties and ﬁllers. G-1 will bond to most woods, gems, glass, porcelain, ceramic, rubber, leather, ﬁberglass, non-waxy plastics and some metals. For best results, G-1 should be used on dry surfaces and cured at room temperature. For oily woods, use G-2 Epoxy Glue. 250ml kit 500ml Kit 1 Litre Kit 2 Litre Kit 8/ 20/ 40/ 400 Litre kits are available
A fast and convenient adhesive for a wide range of needs. 5-cure works in ﬁve minutes to glue woods, metals and non-waxy plastics permanently and the glue line remains ﬂexible. As with all epoxies, 5-Cure actually bonds chemically with the work piece, bonding to either smooth or rough surfaces. 5-Cure is highly water resistant, yet is not intended for constant submersion or where the constant temperature will exceed 50 deg C(150 deg F). This product is also available in a 15 and 30 minute variety. 250 ml kit 500 ml kit 1 Litre Kit 8 Litre Kit 20 and 40 Litre kits
A strong, fexible, impact resistant, 100% solids, non-shrinking epoxy/polysulphide rubber bonding agent. it is a unique structural adhesive for bonding wet cement to cured concrete, steel or other bondable substrates. Powerbond is a gel, suitable for overhead and vertical bonding and embedment. Speciﬁcally formulated with optimum compressive and tensile properties for use under severe conditions of heavy shock and vibration. Powerbond has excellent resistance to salt and fresh water, salt spray, weathering, most acids, alkalis, solvents, oils and fuels. Powerbond is mixed at a simple 1:1 ratio with color indicators to ensure a thorough mix. It will adhere to concrete, steel, stone, brick, ceramic, FRP and wood. Powerbond will not break down under rolling loads. Powerbond offers dependable bonding and curing when applied to damp cold steel under humid conditions 500ml Kit 1 Litre Kit 2 Litre Kit 8/ 20/ 40 Litre kits are available
S-1 Sealer is a two-part epoxy sealer compatible with all types of paints and clear ﬁnishes. S-1 Sealer can be used to protect and extend the service life of concrete,for a penetrating wood preservative and sealer, and for the prevention of moisture migration into FRP laminates. S-1 Sealer also contains rust and corrosion inhibitors for metals.
EPOXIES Can I put polyester gelcoat over cured epoxy?
JET CURE EPOXY
In general, polyester resins won’t cure properly or bond well to epoxy resin products without a “tie-coat” barrier resin in between. System Three SB-112 resin system can be used as a tie coat in between epoxy laminating or coating resins, and polyester laminating or gelcoat resins. Using this resin allows you to gelcoat an epoxy-built or epoxy-repaired boat.
JET CURE is a hardener. It can be substituted for the regular Cold Cure or G2 Epoxy Hardener.It can achieve 80-90% cure overnight in low temperatures 5 to 10C (41 to 50F). It may Blush in high humidity. Mixed with sand it is excellent for ﬁnishing or repairing ﬂoors. 2:1 Ratio 250ml kit 500ml Kit 1 Litre Kit 2 Litre Kit 8/ 20/ 40/ 400 Litre kits are available
Can I color epoxy products?
Yes. The preferred method is with paste pigments. You can add these up to 10% by weight of the Part A resin. You can also use universal paint colorants from the paint or hardware store, but only up to 2% by weight of the resin.
51-CURE was developed for people seeking an epoxy with a 5:1 ratio. It comes with fast or slow hardener and can be employed over a wide temperature range. It can be used for a high strength bond or as a coating that has excellent moisture resistance. Use to wet out and laminate. Fast Cure is recommended for most uses. Slow Cure should be used in higher temperature situations. 375ml kit 750ml Kit 1.5 Litre Kit 3 Litre Kit 6/ 12/ 30/ 60/ 300 Litre kits are available
My epoxy resin is taking too long to cure. How can I speed it up? it
Cold Cure Epoxy Resin bonds virtually everything including woods, metals, concrete and non-waxy plastics in cold, wet, hot and dry weather. Cold Cure exhibits superior strength and bonding capabilities down to 2 deg. Celcius(35 deg. F) even in moist or humid conditions. Cold Cure is ideal for gluing together unlike materials such as wood to metal to plastics. For outdoor repairs to buildings, ﬁnsh carpentry, boat construction and repair. Cold Cure provides a permanent, completely waterproof bond. 375ml kit 750ml Kit 1.5 Litre Kit 3 Litre Kit 6/ 12/ 30/ 60/ 300 Litre kits are available
Some FAQ’S About Epoxies The Part A resin has hardened and turned white. Can I still use it?
Yes. The white solid or haziness is a mass of resin crystals. Crystallized resin will not cure properly. These can be melted by heating the container to 120°F. The resin will clear up and be as good as new.
The Part B hardener is darker in color than when I bought it. Can I still use it?
Probably. Hardeners yellow and darken over time due to contact with air and sunlight. This does not affect their performance. To satisfy yourself do a small test and make sure it cures properly.
The only way to speed the cure of our epoxy resin products, once they’ve been applied, is to heat the room or the area that your project is in. Every 18°F increase in temperature cuts the time it takes for the resin to cure in half.
Which laminating resin is easiest to use for ﬁberglassing?
There are two main things to consider: how the resin wets out the cloth and how well is ﬁlls the weave. The thinner resins, like Clear Coat, will wet cloth easier, but take more coats to ﬁll the weave. With thicker resins, like System Three General Purpose, the opposite is true.
Will the ultimate strength of an epoxy coating be affected if it gets cold while it’s curing?
No. As long as the epoxy is completely cured, the physical properties will not be affected.
What stains can I use before applying epoxy?
Dye stains are preferable because they leave no surface ﬁlm. But in general, any stain can be used so long as it is completely cured before applying mixed epoxy resin. However, it is prudent to do a test by staining some scrap and then applying epoxy. Check for appearance and bonding.
What can I use as a material that epoxy won’t stick to? Epoxies will not stick to mold-release compounds recommended for use with epoxy, and polyethylene sheeting, like disposable paint tarps and sandwich bags. Epoxy does not stick to the shiny side of packaging tape or parafﬁn wax.
I made a small batch and after a week it has not cured. What happened? It is difﬁcult to measure a batch of resin and hardener less than three ﬂuid ounces by volume. If you need to make a small batch, measure it by weight. System Three offers a small digital scale perfect for this use.
I made a large batch and found a few areas that are still sticky after most of the surface is cured hard. What happened? The material was probably not thoroughly mixed and unmixed material was scraped from the container onto the surface. When mixing always be sure to mix from the bottom to the top and scrape the sides of the container and the stick. Experienced users dump and scrape the mixed material from the ﬁrst container into a second and then mix again. This totally avoids the problem described above.
Casting Resins & Additives POR - A -MOLD
Por-A-Mold ® is a two-part mold making system made of urethane rubber that cures at room temperature.Por-A-Mold is easy to use both in mixing and curing. The Por-A-Mold system can be measured one to oneby volume, eliminating the need for expensive weighing equipment, and are cured at room temperaturewithout the use of special heating elements.
POR - A -MOLD THIXOTRIPIC
The Por-A-Mold thixotropic series of urethane casting resins are ideal for reproduction and restoration projects requiring in place restorations. It can be initially brushed onto the masters surface to capture ﬁne detail. As the product thickens, a pallet knife or trowel can be used to apply layers of material of ¼” to ½” over the print coat to build mold thickness. It will not run or drip from overhead and vertical surfaces. Por-A-Mold is easy to measure with a mix ratio of 1 to 1 by volume not weight. 2 Liter kit 8 Liter kit 10 gal kit
POR - A - CAST CLEAR
CLEAR CASTING RESIN is a non-yellowing, UV resistant, optically clear casting resin. Clear casting resin has a working life of 16 minutes and a demold time of 24 hours. It may be necessary to post cure Clear Cast at 160 degrees (F) for 6 to 8 hours, to achieve optimum hardness. To preserve surface clarity, we recommend using a platinum cured Silicone molding rubber.
Por-A-Kast Flex Cast produces a ﬂexible ﬁnished product. Synair’s Flexible Casting Resin can be stained, painted, cut, sanded and ﬂexed. It is often used for decorative trim moldings and architectural components as replication for wood. It resists denting, cracking, deterioration, shrinkage, cold weather, splitting, and abrasion. Flexible Casting Resin has a working life of 5 to 6 minutes, and can be demolded in 20 to 30 minutes. 2 Liter kit 8Liter kit 10 gal kit
LIGHT & DARK BRONZE POWDERS
Light & Dark Bronze Powders provide an alternative to expensive metal casting through a cold casting process.By mixing the light or dark metal powders with Synair’s casting resins, the ﬁnal product takes on the appearance and feel of a ﬁnely crafted brass or bronze casting. Objects produced by cold cast bonded bronze can be colored using cold patinas. Once cast, a light rubbing with ﬁne steel wool polishes the piece to a beautiful metallic luster. Aluminum powder also available. 1 lb. 5 lb. 100 lb.
SYNLUBE MOLD RELEASE
SYNLUBE MOLD RELEASE products are speciﬁcally formulated for use with the following:Flexible Molding systems Urethane Casting Systems, Polyurethane’s, Epoxies, Polyester Resins, Silicone, Rubber, Metal, Plastic, and more.Synlube 531 is a non-silicone spray release and Synlube 1000 is a silicone spray release. 14 oz.
WAXES PARTALL No. 2
Partall No. 2 mold release paste wax is a soft, easily applied dark green release agent. Partall No. 2 can be used in conjunction with polyvinyl alcohol. 100 ml. 250 ml. 7 lb. pai
Honey Wax is a hard paste wax which will yield a high luster with easy application and exhibits excellent parting.Polyvinyl alcohol cannot be applied over top. 14 oz. tin
POLYVINYL ALCOHOL MOLD RELEASE Polyvinyl Alcohol Mold Release ( PVA ) has the viscosity of water and can be brushed, wiped or sprayed on and is used in addition to the paste waxes, particularly on intricate surfaces. 125 ml. 500ml. 1 Liitre 4 liter 20 liter
UNIVERSAL MOLD RELEASE
Universal Mold Release is formulated for mold making and casting, and works well with most liquid rubber and liquid plastic products. It will release mold rubbers ( such as polyurethanes and polysulﬁdes ) from properly prepared molds. It also releases a variety of casting materials (epoxies, Smooth-On liquid plastics, etc.) from cured rubber molds. Properly used, Universal Mold Release improves molding efﬁciency for a variety of casting applications and will actually lengthen the life of your production mold. 12 oz. can
FIBERGLASS FIBERGLASS MATERIALS
CHOPPED STRAND MAT
A chopped strand reinforcing material composed of chopped ﬁberglass of various lengths randomly dispersed to provide equal distribution in all directions, held together by a resin soluble binder. Chopped strand mat is commonly used in laminates due to ease of wet out, the good bond provided between layers of woven roving or cloth and is comparatively low in cost. Chopped strand mat is categorized by weight per square foot, has two feathered edges and is sold by the running yard or in bulk by the kilogram in full rolls. 1 oz x 38” 1 oz x 50” 1.5 oz x 4” 1.5 oz x 6” 1.5 oz x 8” 1.5 oz x 10” 1.5 oz x 12” 1.5 oz x 38” 1.5 oz x 50” 2 oz x 38” 2 oz x 50”
E-Glass cloth is woven from ﬁne yarns of twist and ply construction with the actual glass being a lime-alumina borosilicate glass of low alkali content. This glass composition offers ample ﬂexural and tensile strengths, high chemical stability and high moisture resistance.The cloth weave allows it to conform to curved surfaces with minimum ﬁtting. E-Glass cloth if categorized by weight per square yard and is sold by the running yard. An E-Glass cloth tape with ﬁnished edges is also available and is sold by the running yard of in bulk by the 50 yard roll. 1.43 oz. x 50” 1.73 oz. x 50” 2.5oz.x 38” 4oz. x 50” 4oz. x 30” 5.3oz. x 38” 5.3oz. x 50” 5.3oz. x 60” 5.4 oz. x 50”
Roving is strands of glass ﬁber grouped together to form a twisted yarn. The roving is then woven into a coarse, square, lattice-type open weave to form the material. Woven roving provides great tensile and ﬂexural strengths and a fast laminate buildup at a reasonable cost. It is more difﬁcult to wet out than chopped strand mat or cloth however, and because of the coarse weave, it is not used where surface appearance is important. A layer of chopped strand mat is used between each layer of roving to ﬁll thecoarse weave when more than one layer is required. Woven roving is categorized by weight per sq. yd. and is sold by the running yard or in bulk by the kilogram. 18 oz x 38” 18 oz x 50” 24 oz x 38” 24 oz x 50”
Surface mat is manufactured similar in appearance to the chopped strand mat but is much ﬁner. it is composed of ﬁne ﬁberglass strands of various lengths randomly dispersed in all directions held together by a resin soluble binder. This material is used to provide a resin rich layer in liquid or chemical holding tanks, or as a reinforcement for layers of gelcoat. This material is sold by the running yard or in bulk by the 250 meter roll. 38” x 250m
NEMPC or Knytex is a ﬁberglass composite composed of 17 oz. biaxial (± 45deg) unwoven roving stitched fabric incorporating a 3/4 oz. chopped strand mat stitched to one side of the fabric. NEMPC is used where optimum strength and stiffness, particularly in corners and angles, is critical. The material is categorized by weight per sq. yd. (17.08 oz.) and is sold by the running yard or in bulk by the kilogram. 17.08oz.x 4” 17.08oz.x 6” 17.08oz.x 8” 17.08oz.x 10” 17.08oz.x 12” 17.08oz.x 50”
S-Glass Cloth is manufactured similarly to E-Glass Cloth, but with a different sizing (coating). Thus, S-Glass Cloth is stronger and tougher that EGlass Cloth and has 20% greater tensile strength. S-Glass Cloth provides a premium multi-stage ﬁnish and has the highest impact strength of all ﬁberglass materials. This material is categorized by weight per sq. yd. and is sold by the running yard or in bulk by the 125 yard roll. 6 oz. x 30”
Carbon Fiber is a graphite fabric especially designed for use in laminates which have critical requirements for maximum stiffness, extremely high tensile (3 times that of steel) and comprehensive (5 times that of steel) strengths, with low weight. Its main function is local reinforcement to improve the strength to weight ratio of highly stressed parts. Carbon ﬁber is weak in shear strength and impact resistance and should be shielded from abrasion with ﬁberglass or other materials, such as Kevlar®. This material is categorized by weight per sq. yd. and is sold by the running yard. 5.6 oz. x 1” 5.6 oz. x 2” 5.6 oz. x 3” 5.6 oz. x 4” 5.6 oz. x 5” 5.6 oz. x 50” Plain 3K 5.7 oz. x 50” Twill 2x2
Kevlar® is a high strength (5 times that of steel), high modulus (75% of carbon ﬁber) aramid ﬁber. Aramid is technically an aromatic polyamide, which is a complex hydrocarbon and a distant cousin of nylon. Kevlar® is the most impact resistant ﬁber on the market, also exhibits the highest tensile strength and highest resistance to damage, vibration and crack propagation. However, Kevlar® has very low compressive strength, so it is recommended that laminates carrying bending or compression loads have carbon ﬁber incorporated into the laminate to provide adequate stiffness. Kevlar® is alsohygroscopic, ultra violet sensitive and un-sandable, thus it is not recommended as a sheathing or outer ply of the laminate.Kevlar® is categorized by weight per sq. yd., available in a cloth weave and sold by the running yard. 5.0 oz. x 1” 5.0 oz. x 2” 5.0 oz. x 4” 4.8 oz. x 58”
FIBREGLASS RESIN FIBREGLASS RESINS
All polyester resins are divided into different groups. To help you understand these we have included a brief description of each type.
MARBLE BONDING RESIN
WAXED A waxed resin is generally referred to as a ﬁnishing resin. It will cure to a hard, tack-free surface when fully cured. This type of material is generally used as a single coat,a ﬁnal coat or for minor repairs. UNWAXED An unwaxed resin is generally referred to as a laminating resin. When fully cured, the surface will remain slightly tacky. This type of material is generally used in multiple laminations such as laying up a mold. ORTHOPHTHALIC Orthophthalic(ortho) resins are the basic chemistry of polyester resins. It is a raw material utilized in general purpose polyester resin and has a type of molecular structure that is considered to be the standard in the industry. ISOPHTHALIC Isophthalic (iso) resins are higher grade resins than ortho resins in that the molecular structure is denser. it is a special raw material utilized in corrosion resistant and/or premium grade polyester resins. These resins will exhibit a higher heat distortion temperature, higher strength, greater ﬂexibility and are more waterproof than orthophthalic resins. GENERAL PURPOSE RESINS Our general purpose resins IP 140 and IP 150 areunwaxed/waxed orthophthalic polyesterlaminating resin which exhibit moderate exotherm temperature and cure to allow for thicker laminating applications.These resins are used in the marine, automotive, sundeck and general do-ityourself applications 1 Litre 4 Litre 10 Litre 5 Gal
Surfboard resn (IP 737) is a waxed orthophthalic UV stabilized water clear polyester resin speciﬁcally designed for surfacing surfboards/skimboards/ wakeboards/sailboards,boats and other applications.Surfboard resin also has good impact resistance and resists cracking and crazing when ﬂexed,which makes it ideal for surfboards. 1 Litre 4 Litre 5 Gal
FT-006An unwaxed, orthophthalic polyester industrial marble casting resin used in the manufacture of synthetic marble. 3.7 Litre 5 Gal
B.P.O. PASTE CATALYST WHITE
This catalyst is needed to initiate the cure of marble bonding resin(FT152) and most automotive putties eg. Bondo, etc. 1 oz 4 oz 500 ml 3.6 kg
Feather-Rite is a fast curing lightweight, ﬁlled polyester putty that is easily sanded and faired. Feather-Rite comes complete with its own colored BPO paste catalyst for easy mixing. Extra catalyst is available. .75 liter 3 liter 18.9 liter
Duraglas is a strong, glass ﬁlled waterproof polyester putty that is somewhat sandable. Duraglas comes with its own colored BPO catalyst for easy mixing.Extra catalyst is available .75 liter 3 liter
LONG N STRONG
Long N Strong is the strongest of the waterproof polyester putties as it has a high ﬁberglass strand content. Use where strength is required. Comes with its own colored BPO catalyst for easy mixing. .75 liter 3 liter
Poly-Fair F26 is a waterproof. low density polyester-based fairing compound formulated for the marine environment. It has excellent adhesion to cured ﬁbre-reinforced polyesterand vinylester laminates. It sands easily, gives a hard ﬁnishafter a full cure, yet is not brittle and has good impact strength. It is also a suitable base for all marine ﬁnishes such as polyester, urethane and epoxy paints.Poly-Fair F26 is only sold in a 19 liter (5 gal) pail.
FILLERS Fiberglass Fillers and Additives CABOSIL
Cabosil is light weight, low density fumed silica powder additive for use in all types of resins and gelcoats although, when used to thicken polyester or vinylester resins, creates an excellent medium sanding, non-slumping compound 40 gram 180 gram 1.2 kg. 4.54 kg.
1/8” MILLED FIBERS
Milled Fibers are ground ﬁberglass ﬁbers. They will add moderate strength to any type of resin or gelcoat alone, or in combination with other ﬁllers.
NON SLIP ADDITIVE
Non Slip Additive is a medium grade crushed walnut shell that can be added to any resin, gelcoat or paint to make any area a slip proof surface.
ULTRA VIOLET ABSORBER
Ultra Violet Absorber is a mica powder used as an additive for clear coats to block ultra violet rays.
Glass bubbles is a hollow silicone dioxide powder.It is a non-absorbent additive used to extend all types of resins and gelcoats. it can be used in resins alone; however, its main use is to be used in conjunction with other ﬁllers to create easy to sand compounds. 100 gram 400 gram 2 kg. 15.42 kg
POLYESTER COLOR PIGMENTS
DURATEC CLEAR HIGH GLOSS ADDITIVE
Interﬁbe is a treated cellulose ﬁber and is the replacement ﬁller for asbestos. It is an economical additive for all types of resins and gelcoats to create a hard to sand, gap ﬁlling,bedding and ﬁlleting compound. 100 gram 500 gram 2.5 kg.
Industrial Talc is a magnesium hydroxide powder and is the most economical ﬁller. It is an additive used to thicken all types of resins and gelcoats and is easily applied and sanded. 450 gram 1.5 kg. 10 kg. 22.68 kg
Mini Fibers are dense, ground polyethylene ﬁbers. It is an additive for all types of resins and gelcoats although, when used to thicken epoxy resins, it creates and excellent medium sanding, non-slumping compound. 400 gram 450 gram 4.54 kg.
1/4” CHOPPED STRAND
Chopped Strand is actual strands of ﬁberglass chopped into 1/4” lengths. It can be added to any type of resin or gelcoat alone or in combination with other ﬁllers where strength is required. 450 gram 1.5 kg
Wood Flour is a ﬁne sawdust that has been ﬁltered so that there are no surprise lumps to be found. Wood Flour is excellent for creating glues and structural ﬁllers and ﬁllets. It is a ﬁbrous ﬁller that is also thixotropic. To make a smoother ﬁllet add a small amount of Cabosil or Glass Bubbles.
Polyester color pigments are used for tinting polyester resins and gelcoats. These colors cannot always be successfully together. Stock colors are: 101(White), 105(Gray), 109(Black), 111(Dune Beige), 113(Topaz), 115(Herbs Brown), 117(Chocolate brown), 141(red), 145(Orange), 147(Yellow), 151(Forest Green), 153(Deck Green), 155(Light Green), 161(Royal Blue) and 165(Light Blue).
Use Duratec Polyester Clear High Gloss Additive to repair clear or pigmented gelcoated FRP parts. The end result is a low porosity, smooth, high gloss, hard surface that is similar to the original gelcoat surface. Duratec Polyester Clear High Gloss Additive also upgrades tooling gelcoats. Used correctly, the additive will reduce subsurface porosity and orange peel, increase impact resistance, improve gloss retention and heat distortion temperatures. Just blend and mix equal parts of Duratec Polyester Clear High Gloss Additive and the gelcoat and catalyze at 2% with MEKP catalyst. Thin 5-15% if necessary to a desired spray viscosity with MEK solvent or a fast acrylic lacquer thinner.Requires M.E.K.P catalyst. 4 liter
Methyl Ethyl Ketone Peroxide is an organic peroxide needed to initiate the cure of polyester resins and gelcoats. 15 ml 60 ml1 250 ml 1 Litre 4 Litre 20 Litre 500 ml 20 Litre 3.63 kg are also available
A specially formulated additive that can be mixed with polyester resin and gelcoat to speed both gel time and cure time in cooler temperatures. After adding Promoter “W” always allow a minimum of 1/2 hr for resin to sit before adding catalyst. 55 ml 250 ml 500 ml 1 Litre
AIR DRY ADDITIVE
An additive used to convert unwaxed polyester resins and gelcoats into a waxed product, enabling them to cure to a hard, tack-free surface. 55 ml 250 ml 500 ml 1 Litre 4 Litre
Paints & Coatings SICO EXPERT SERIES PAINTS
Sico Expert is a line of architectural coatings including primers, and interior and exterior latex and alkyd ﬁnishing paint. The range of products, designed for the professional, also includes specialty items such as rustresistant paints, varnishes, stains, etc.
Smell the winds of change. Across North America, green architecture is steadily becoming the way to go. Sico is on the leading edge of the trend with Ecosource, a new interior paint that combines efﬁciency with concern for the environment.
Recently certiﬁed Green Seal, Sico Expert has taken another step for the environment by offering low VOC formulas. It is the expert’s No. 1 choice.
Designed with a formula excluding volatile organic compounds, (VOC’S) Sico Ecosource emits no offensive odour and reduces to ZERO any adverse effect on the ozone layThis new high performance 100%-acrylic latex paint has minimal impact on the ecosystem.Invest in a greener planet.
SICO CEILING PAINT
THE SICO DESIGNER FAMILY
The Sico Designer Family offers the ﬁnest quality paints.The result of unique Sico technology,these 100% acrylic formulas are designed to enhance and enliven your interiors.
Sico Cashmere,a no gloss ﬁnish is ideal for living rooms,dining rooms and bedrooms.
Sico Chamois,a soft gloss ﬁnish suits every room in the house, and can also be used on doors and trim.
Sico Shantung, a silky gloss ﬁnish, is ideal for kitchens and bathrooms,childrens rooms and can also be used on doors and trim.
The Sico Design Family,ﬁne quality paints for every room in your house!
What rolls on pink and turns white as it drys? Sico’s Ceiling Paint... painting white over white, make sure you get the best coverage and no missed spots,the color change makes it easy to do the best job possible on your ceiling. Today’s approach to ceilings involves painting them a natural white. For pleasing contrast, here’s an inspired idea: choose colours two shades paler or darker than those on the walls. Applying a colour that is darker than the walls will have the effect of lowering the ceiling. You can achieve the same effect by painting several inches of the walls just below the ceiling the same colour as the ceiling. Doing the reverse, painting a ceiling paler and lighter than the walls, will convey an impression of height. As for moldings, frames, plinths and other trims, the approach is the same as that for ceilings. Natural white is a classic solution but you can use a colour two shades lighter or darker than that on the walls to create a subtle contrast. And think about this for accenting the room’s trim: select a glossier ﬁnish than what you’ve chosen for the walls.
WOOD RESTORATION FLOOR PAINTS Sico Expert Urethane is a hard working, hard wearing ﬁnish that is resistant to abrasion.It is ideal for wodden ﬂoors,furniture and woodwork too. 100% Acrylic Latex, polyurethane fortiﬁed, excellent resistance to humidity and wear, dries quickly, very low odour, easy maintenance, satin ﬁnish, multitude of colours.
Paints & Coatings SICO POLYPREP PRIMERS Primers are designed to adhere to the substrate and create a uniform surface for the top coat. Primers penetrate and adhere to raw surfaces, evening up porosity so that the ﬁnal paint ﬁlm doesn’t look blotchy . Primers for wood, whether they are latex or oil-based, contain specialized ingredients that top coats don’t necessarily have, or have in lesser amounts. Stain-inhibiting tannin blockers or preservatives that are found in primers, for instance, are designed to soak into raw wood but not into ﬁnished surfaces. Primers for other surfaces have similarly specialized ingredients. The Sico Polyprep family has a primer for every painting application in every room of the house,even for ceramic tile!
Corostop Ultra Corostop is the anti-rust plastic enamel. It is a blend of Alkyd Oils and Flexible Polyurethane.This paint can be applied on metal or wood in interior and exterior applications.Ultra resistant - ultra hiding - ultra gloss - ultra colourful!
Sico has an exterior stain for every application,from walls to decks,from solid to silky transparent.Show off your wood in its best light and protect its value for years to come. Sico 210 Solid Color Acrylic,for excelent durability on vertical surfaces, is high hiding and resists chalking. Sico 212 Semi-Transparent Alkyd Stain enhances the beauty of natural wood without concealing the grain.Durable protection for all vertical surfaces. Sico 211 Semi-transparent Deck Stain offers durable protection while showing off the natural beauty of your wooden deck. Sico 215 Solid Colour Deck Stain is easy to apply and offers great protection against weathering. Sico 218 Translucent Alkyd has excellent resistance to cracking,peeling and fading.Your wood will come alive with the richness and depth of this product. Sico 214 Solid Latex Wood Stain is our best quality.It can be used on both vertical and horizontal surfaces and on all types of wood. Finally there is no need to change product for siding,deck and fences.214 is formulated to hide well and offers a great satin ﬁnish.
For all of your priming and undercoat needs Polyprep is the best solution,even in problem areas and over tough to paint surfaces. Polyprep 1 Is ideal for porus surfaces,seals gypsum
board,wood,plywood,brick and masonry.It can be applied over old oil or water based coatings and prevents spotting of your ﬁnished work.
Polyprep 2 is the ideal primer for deep colours,is tintable and usable in any room in the house.Polyprep 2 improves the hiding power of your ﬁnished coat.
Polyprep 3 is the ideal primer for glossy surfaces,including,
melamine, laminates, plastics, even use it over ceramic tile! It is super fast drying.
Paints & Coatings ENDURA COATINGS Endura EP-521 Epoxy Primer
Endura EP-521 Epoxy Primer is a high solids, two-component primer formulated for use where high impact and abrasion resistance is required. It provides excellent adhesion, hardness, and corrosion resistance over a wide range of substrates. It is designed to ﬁll a sandblast proﬁle of 2.0 to 3.0 mils in one coat. This is our most durable primer for equipment, providing excellent adhesion, hardness, and corrosion resistance. •No induction time required •Up to a 3 day topcoat window •50 Standard colours available .473 litre 946 litre 3.78 litre
Endura EP-221 Epoxy Primer
Endura EP-221 Epoxy Primer is an increased solids, two-component primer providing excellent adhesion, hardness, and corrosion resistance over a wide range of substrates. It is specially formulated as a higher build primer. It ﬁlls a sandblast proﬁle in one coat. It features a prolonged pot life and topcoat window without sanding. •Can be top coated in 3 hours •Extended topcoat window - can be top coated up to 7 days later •Can be used as a sealer over existing ﬁnishes •For use as a basecoat for colours with poor hiding •Prolonged pot life reduces waste •50 Standard colours available. .473 litre 946 litre 3.78 litre
Endura EP-2C Primer/Sealer
Endura EP-2C Primer/Sealer is a two-component, epoxy urethane designed for use on a variety of substrates. Contains Zinc Chromate to provide excellent rust inhibitive properties over sandblasted steel, bare steel and other ferrous metals. It provides an excellent blend of adhesion, hardness, and corrosion resistance over: aluminum, bare steel and other bare metals, ﬁberglass, and reinforced plastics. Can be used as a sealer over existing ﬁnishes. •Provides high temperature service •No induction time required •Excellent adhesion to a wide variety of substrates •Inter-coat adhesion greater than 2000 psi •A non-sanding sealer •Suitable for sealing HS-421 Primer .473 litre 946 litre 3.78 litre
EP-FD Epoxy Primer
Endura EP-FD Epoxy Primer is a two-component primer providing excellent adhesion, hardness, ﬂexibility, and corrosion resistance over aluminum, bare steel and other metal surfaces. It features a prolonged pot life and topcoat window without sanding. It can be used as a sealer over existing surfaces. •When used in thin ﬁlms as a sealer, it can be top coated in one hour •When used in thicker ﬁlms as a primer, it can be top coated in two hours •Extended topcoat window - can be top coated up to 7 days later •A good sealer for HS-421 Primer •Prolonged pot life reduces waste •50 Standard colours available .473 litre 946 litre 3.78 litre
MC-ZN Zinc Rich Primer
Endura MC-ZN Zinc Rich Primer is a two-component, low VOC, moisture cure, zinc-rich primer. A 90% zinc content in the dry ﬁlm provides the highestcathodic corrosion available in a sprayable coating. MC-ZN Zinc Rich Primer isa superior primer ideally suited for industrial and marine applications. .473 litre 946 litre 3.78 litre
EP-Mastic Epoxy Primer
Endura EP-Mastic Epoxy Primer is a low VOC, surface tolerant epoxy primer. It has a semi-gloss ﬁnish which makes it an ideal self-prime coating. It is typically used on structural steel and concrete. * High Solids * Self-prime coating .473 litre 946 litre 3.78 litre
EP-Hi-Build Epoxy Primer
Endura EP-Hi-Build Epoxy Primer is designed as a multi-mil coating for use on bare metals and ﬁbreglass reinforced plastics. It can be used over properly sealed existing ﬁnishes. It can be employed as a self-prime coating or topcoated with Endura EX-2C coatings. Proven for heavy industrial applications such as offshore drilling rigs, ships, chemical plants, pulp mills, reﬁneries and bridge work. This primer is waterproof at 10 mils Dry Film Thickness. * High Solids provide a quick ﬁlm build * Excellent alkali and salt spray resistance * Available in white, grey and black. .473 litre 946 litre 3.78 litre
Endura EP-PA Primer is a two-component polyamine primer designed for use on smooth aluminum. The hardness and ﬂexibility of this product are rated as excellent. It is ideally suited for aluminum aircraft and boats. * Superior primer for aluminum * Excellent corrosion resistance. .473 litre 946 litre 3.78 litre
Endura HS-421 is a two-component acrylic urethane primer designed for spray application. It is designed as an automotive primer for previously painted surfaces. It has high build capability, and is easily sanded. HS-421 Primer can also be used directly over properly prepared wood, ﬁberglass, and polyester ﬁllers. * High build - up to 10 mils Dry Film Thickness * Easy sanding after as little as two hours * Formulated to ﬁll imperfections in rough or porous surfaces .473 litre 946 litre 3.78 litre
Paints & Coatings ENDURA TOPCOATS EX-2C Topcoat
Endura EX-2C Topcoats are durable, high performance polyurethane coatings for protecting all surfaces. High gloss, high colour retention, and outstanding resistance to chemicals, abrasion, and impact, provide maximum protection. A library of over 40,000 colours based on standard industrial, automotive, corporate, and ﬂeet colours Colour matching service avaiable throught all stores. Available in high-gloss and reduced gloss .473 litre 946 litre 3.78 litre
EX-2C Clear 100
EX-2C Clear 100 is for use over Endura EX-2C Topcoats. It is an aliphatic, polyurethane clear coat designed to provide additional protection from ultraviolet light, and acids. The UV light absorber contained in EX-2C Clear 100 provides exceptional ultraviolet light protection and increases the service life of all colours. This clear coating is used over solid, metallic, and pearl colours. It is suitable for use in many harsh chemical environments, providing extra protection against the attack of acid rain. It can be used as a durable, self-prime coating for wood ﬂoors. * Exceptional abrasion resistance * Excellent protection. .473 litre 946 litre 3.78 litre
EX-2C Anti-Grafﬁti Coating
Endura EX-2C Anti-Grafﬁti Coating is a modiﬁed aliphatic-polyurethane coating with enhanced abrasion resistance. It provides outstanding resistance to chemicals, excellent colour retention, and a slick, highly abrasion resistant surface. EX-2C Anti-Grafﬁti Coating is ideal for use in public areas or on whiteboards. .473 litre 946 litre 3.78 litre
Clear 100 Floor Finish Clear 100 Floor Finish is a tough and durable polyurethane that will resist marring, chipping, and household stains. It is extremely durable and abrasion resistant. Designed as a self-prime coating for hardwood ﬂoors in gymnasiums and bowling alleys, and concrete ﬂoors in warehouses. * Excellent protection against acids and alkalies * Exceptional UV light protection * Available in high gloss and reduced gloss .473 litre 946 litre 3.78 litre
Endura EX-2C FC Topcoat is a ﬂexible, two-component, polyurethane coating formulated for game lines on vinyl and linoleum ﬂooring. Outstanding resistance to chemicals, abrasion, and impact, offers maximum protection. * High gloss and colour retention * A library of over 40,000 colours * Colour matching service available * Available in high-gloss and reduced gloss .473 litre 946 litre 3.78 litre
Endura EX-2C SFC Topcoat is a two-component, Super Flexible Coating formulated for game lines on rubber ﬂooring. Outstanding resistance to chemicals, abrasion, and impact, offers maximum protection. * High gloss and colour retention * A library of over 40,000 colours * Colour matching service available * Available in high-gloss and reduced gloss .473 litre 946 litre 3.78 litre
Paints & Coatings ENVIRO-POXYFLOOR EPOXY PAINT Enviro-Poxy™ is two component 100% solids epoxy ﬂoor coating An advanced, environmentally friendly two component 100% solids epoxy coating system which contains no VOC’s (Volatile Organic compounds), no solvent, no water and virtually no odor. Enviro-Poxy™ has been designed to provide superior functional and decorative properties by providing high chemical resistance, high mechanical strength, excellent durability and adhesion which protects the substrate from wear, chemical attack, stains and mechanical stress while offering a beautiful porcelain like high gloss ﬁnish. Available In: Beige, Black, Blue, Brown, Chr Blue, White Clear, Green, Grey, Pap White, Saf Yellow, Tile Red Where To Use:Enviro-Poxy™ is ideal for high trafﬁc areas and can be used in a variety of facilities, including Heavy industry, manufacturing facility, warehouses, hospitals, laboratories, institutions, dairies, breweries, schools, aircraft hangars, chemical plants, pharmaceutical plants, commercial ﬂoors and dealerships. Enviro-Poxy™ is also approved by CFIA ( Canada agricultural food) for use in food and food related facilities. Where Not To Use:-vertical surfaces and exterior surfaces. -Not recommended for use on wood, metal, glazed surfaces Surface preparation: Enviro-Poxy™ should be applied only on clean, sound surfaces free from oil, grease, was, foreign materials and paint subject to ﬂaking or peeling. Clean and prepare concrete surfaces mechanically or clean surfaces with a degreaser, rinse thoroughly and allow to dry before applying the coating. A clean, dry, solid, uncontaminated substrate SHOULD BE provide. Concrete: Freshly poured concrete must age a minimum of 30 days before coating is applied. Mixing Directions: Do not mix the two components until you are ready to begin application. Once mixed, the coating must be applied within 45 minutes. To mix, pour contents of PART-B container into the PART-A container and mix thoroughly.
- Do not apply over wet, glistening surface, - Apply coating to dry, clean, well prepared surfaces using squeegee, high quality lint free low pile roller or a standard brush. Allow 20 hours before applying a second coat. Clean Up - Clean skin with soap and water or a standard hand cleaner immediately. Do not let coating dry. Precautionary - Paint only in dry weather. Avoid painting in extremes of temperature or late in the day when dew or condensation are likely to form or when rain threatens. Avoid contact with eyes.
GARAGE GUARD WATER-BASE EPOXY
A new generation, water based catalyzed epoxy, which offers performance equal to traditional solvent based epoxy systems. Long lasting abrasion and impact resistant formula won’t crack or peel. Even hot car tires won’t affect the ﬁnish - No lifting of the ﬁnish. Resists many solvents, acids and salts so that your ﬂoor continues to look great for a long time. It has a semi gloss ﬁnish so it’s easy to keep clean. Your garage ﬂoor will look like a showroom ﬂoor from now on. It’s fast drying - Low odour, and not toxic.
Penoﬁn Concrete & Masonry Stain
Made with the highest quality resins and pigments available, PENOFIN Concrete and Masonry Stain will add long-lasting durable beauty, color and interest to any concrete or masonry application around the home. It is an inexpensive way to add beauty to your home both inside and out. • Low VOC • Quick-Drying • Easy Soap-and-Water Cleanup • For Concrete, Fiber Cement, Stonework • Eight Concrete & Masonry Stain Colors: Sandstone, Slate, Bluestone, Egytian Alabaster, Serpentine, Dolomite, Soapstone, & Terracotta
Paints & Coatings RAPTOR TRUCK BED LINER Tough, durable 2 pack urethane coating Available in Black Beneﬁts: •Easy to use - simply ﬁll - shake - spray •Choice of pot life/dry times controlled by the speed of the hardener •Enough material to re-spray the largest truck beds •Dries rapidly & UV resistant •Scratch & stain resistant •Protects against rust, corrosion salt, damp & extreme temperatures •Waterproof, ﬂexible, helps deaden sound & vibrations •Apply with spray gun, roller or brush to obtain different textures •Provides excellent adhesion
teraGRIP is a water based sigle component, acrylic urethane copolymer with an aggregate of recycled rubber crumb. teraGRIP contains no VOCs, is odorless and provides an attractive, highly durable, impact resistant noskid surface. It is also available with reduced aggregate for commercial kitchen applications Coverage: two coats of 50-60 sq.ft. per 3.78 litre. Available in 18 colors. (check store for current selection)
LIQUID STAINLESS STEEL Thomas’ Liquid Stainless Steel TM is made with 100% stainless steel. Thomas’ Liquid Stainless Steel TM will transform the exterior of any colored, new or old: refrigerator, range, dishwasher, and microwave. We do not use any colorants - what you see is stainless steel. It looks like stainless steel because it is stainless steel! It is a new micrometal technology which combines microscopic particles of stainless steel with a hybrid polymer that allows the stainless steel to ﬂow. A brushed satin stainless steel ﬁnish is ideally suited for kitchens because its satin texture prevents ﬁngerprints. You will see the ﬁnish brighten as it dries. An average size refrigerator, range and dishwasher can be transformed with Thomas’ Liquid Stainless Steel TM in a weekend. It is very important to apply per our instructions. Total time to completion is 7 - 10 hours.
KRYLON PAINTS Fusion
Discover this revolutionary paint for plastic - Fusion. This top-selling paint is the ﬁrst of its kind that bonds directly to most plastics. Turn a treasured toy into something new again. Get many more years of enjoyment out of your outdoor patio furniture. And don’t waste that waste paper basket - simply give it a new coat of paint. •No sanding, no priming, no fuss •Dries in 15 minutes or less •Features the EZ Touch Fan™ Spray Nozzle
This glow in the dark paint really makes your projects stand out! It’s highly visible at night, making it perfect for items from camping equipment to your car keys. Best if used over white base. High night visibility Produces glowing effect Recharges with exposure to light Perfect for bikes, sporting equipment, camping gear, kids roomaccents, light switch plates, holiday decorations, costumes and porches& railings. Convenient spray or brush-on
Krylon H2O is an exciting breakthrough in spray paint technology. Its patented low-odor water-based latex formula allows the user to paint indoors and the soap and water clean up makes messes a thing of the past. Fast dry, durable ﬁnish. Spray able indoors and outdoors. Use on wood, metal, wicker, paper, masonry, drywall, wrought iron, and rubber. One can covers up to 25 sq. ft. on a solid, primed surface.
From a football ﬁeld to the perfect spot for your garden, mark up just about anything with Krylon® Mark it!® Inverted Sprays.Available in a wide variety of high visibility colours. Features a spray-thru cap for inverted applicators Creates crisp clean lines Durable formula with clog-resistant applicator Dries in 15 minutes
Paints & Coatings INSL-X SWIMMING POOL PAINTS
CHLORINATED RUBBER POOL PAINT
Insl-x Chlorinated Rubber pool paint is a premium quality coating that offers excellent chemical and abrasion resistance and can be applied over most existing chlorinated rubber or pliolite based pool paints in good condition. This paint may also be used on bare concrete, marcite, gunite, and other masonry surfaces. A highly chemical resistant, fast dry, fungus and moisture resistant coating. RB-1600 will cure at low temperature, and provide a hard, low permeability corrosion resistant ﬁlm.
WATERBORNE POOL PAINT
A new generation of waterborne, acrylic emulsion pool paint which can be applied over most types of pool coatings in good condition, as well as bare concrete or plaster surfaces. Environmentally friendly, low VOC, WR-1000 Series pool paint can be applied to damp surfaces, dries quickly for recoating and withstands continuous submersion in fresh and salt water.
EPOXY POOL PAINT
Insl-Guard Epoxy pool paint is a high solids, two componant coating that offers excellent chenical and abrasion resistance and can be applied over most existing expoxy pool paints in good condition. It can also be applied over steel and ﬁberglass.
RHINOHIDE Rhinohide is excellent to use on all wood, masonry, brick, stucco and cinderblock. The acrylic water base offers superior surface adhesion. High hiding, easy application and rapid drying are other characteristics that make Rhinohide the ﬁrst choice with many homeowners. This product can be used on new, unﬁnished, previously painted or stained surfaces. It has been formulated to resist cracking, peeling and blistering. The stain provides an opaque uniform ﬁnish for a “painted” look, yet it allows the grain texture to show through. Availible in White, Pastel Tints, Chocolate Brown and Black
Mobile Coat Brings the beneﬁts of our professional-grade elastomeric roof coatings to your mobile home or RV. Chase pesky leaks and shrink cooling costs in style. •High quality, 400% elastomeric roof coating, acrylic, white liquid •Used to waterproof and maintain Mobile Home and RV roofs •Reﬂects 85% of the sun’s heat rays. Keeps mobile homes cool inside during the summer •Cures to form a highly elastic, long lasting, tough seamless membrane that outlasts other petroleum based and latex acrylic products •Renews, seals, protects and prolongs life of roof •Durable and ﬂexible over wide range of temperatures, to resist cracking and peeling •Protects against damaging effects of the sun, wind, snow, rain and ice •Dramatically lowers roof and interior temperatures, reducing energy costs •Environmentally friendly •Soap and water clean up, immediately after use
Extremely elastic and highly reﬂective, Snow Roof protects your building from both leaks and the sun’s rays. It expands and contracts with your roof, and ﬂows into cracks and crevices during application to seal them up. •Seals and protects •Bright white, premium grade, 100% elastomeric, water-based, liquid roof coating •Bonds directly to most existing roof systems •Cures to form a tough seamless membrane, which seals and protects the roof•Protects against damaging effects of the sun, wind, snow, rain and ice•Reﬂects 90% of the sun’s rays •Dramatically lowers roof and interior temperatures, reducing energy costs •Durable and ﬂexible over wide range of temperatures•Resists mold and mildew•Safe and easy to use• Environmentally friendly•Prolongs roof life
Paints & Coatings
Ultra was designed as an ultra-versatile family of products; they combine anti-rust and plastic enamel functions and are as good on wood as on metal, both in-doors and out. This family includes the following highperformance products: anti-rust paint and plastic enamel, specialized sprays, priers, a metal conditioner and rust remover and a wide selection of over 1,000 colours. 1 liter 3.78 litre
FREEZER-KOTE •Self Priming •Can be applied in sub-freezing temperatures •Heavy Duty •Excellent abrasion resistance •Ideal for use on wood, metal, plasterboard and masonry A high gloss, non-yellowing white coating designed for application from ambient to sub freezing temperatures. Freezer-Kote is perfect for use on interior frozen food lockers, ice cream hardening rooms, cold storage facilities and deep freeze units. This product is made to be applied in sub-freezing temperatures eliminating the need to shut down the freezer. FreezerKote is self priming and exhibits excellent adhesion on masonry, wood, plasterboard and metal..
KLENK’S BATHTUB REFINISH Fibreglass & Plastic
Water-based, 2-part epoxy coating restores a durable, like-new gloss ﬁnish on plastic and ﬁberglass surfaces, like tub surrounds, without the fumes and mess of solvent-based epoxy ﬁnishes. 2- to 3-hour dry time between coats, 3- to 5-day complete cure time. Includes 1quart epoxy coating, surface cleaner, non-latex disposable gloves, stir stick, tack cloth, roller and brush, 220-grit wet/dry sandpaper, and illustrated instructions.
PLASTI DIP A ﬂexible synthetic rubber coating that exhibits excellent moisture, acid, alkaline and abrasion resistance. Won’t crack or chip. Insulated from electricity, heat and vibration and provides a durable weather resistant grip Adds grip/color codes tool handles,Prevents corrosion of battery trays, Weatherproofs/ seals clay pots, arts/crafts, Protects lawn care equipment, Seals frayed rope and cable ends,Use as chip-guard on painted trailers.
RustGrip KLENK’S BATHTUB REFINISH Tub Tile & Sink
2-part epoxy coating creates a durable, hard, high-gloss ﬁnish on old porcelain and ceramic surfaces that looks and performs like new porcelain to avoid replacement. 1- to 2-hour dry time between coats, 5- to 7-day complete cure time. Contains everything needed to reﬁnish 1 average-size tub, 2 sinks, or 80 to 150 sq.ft. of tile. Includes 1-quart epoxy coating, porcelain prep, surface cleaner, non-latex disposable gloves, stir stick, tack cloth, roller and brush, 220grit wet/dry sandpaper, and illustrated instructions.
Rust Grip is made with special solvent carriers that allow the coating to penetrate into the pores carrying the body of the coating with it. Once the body of the coating is in the pores, it begins to absorb the moisture from the atmosphere and gases itself or does a microscopic swell inside the pores that anchors it into the metal or any other surface. This action does allow the coating to become part of the actual surface with is different than all other industrial coatings. Also, its high molecular weight allows the coating to become extremely tough.
STRIPPERS AND CLEANERS REMOVALL PRODUCTS No matter what you are painting, you will require some sort of surface preparation before you apply the paint. You may need to remove rust, clean off dirt and grease, etch the concrete or remove gray wood ﬁber. RemovALL offers a product for each surface prep situation. Each product in the range is highly effective, safe for the user and environmentally friendly. RemovALL products are being used in many different industrial markets. For example, the paint strippers are being used to strip aircraft all over the world. These same industrial strength products are now being offered to the “Do-it-yourself” market for the ﬁrst time. The RemovALL products are conveniently packaged, appropriately named, easy to use and widely available. The paint removers are based on the SARA (Selective Adhesion Release Agent - technology and most of the products also meet the criteria of the Environmental Choice Program - that certiﬁes them as environmentally responsible.
Concrete Oil Stain Remover
Concrete Safe-Etch Literally a breath of fresh air to anyone who etches concrete - no smell, won’t burn your skin, won’t damage your clothes, plus it does a better job than harsh chemicals. Features and Beneﬁts Easy to use, clean up with water Safe - not regulated for worker health & safety NO MURIATIC ACID No toxic or hazardous air pollutants Biodegradable, water-based formula 1 gal. and 5 gal.pails.
Flooring Adhesive Remover
Finally a product that quickly, safely, and easily removes oil stains from your driveways, patios, garage ﬂoors, and basement ﬂoors.
Why mess with the nasty smell of solvents? Here’s the easy way to get rid of the black mastic, carpet underlayment, contact cement, foam tape, or even adhesive label residue.
Features and Beneﬁts Safe & easy to use, cleans up with water Industrial strength Non-toxic Biodegradable Environmentally friendly 1 US Gallon
Features and Beneﬁts Works on the toughest adhesives including black mastic Easy to use, cleans up with water Low odor - NO METHYLENE CHLORIDE Non-abrasive, water based formula Safe - NON FLAMMABLE, NO PHOSPHATES, NO CHLORINE 3.8 liter
Grafﬁti Remover Concrete Stripper A new and better way to strip paint - no harsh chemicals. Simply apply a thick coat, walk away, and let our stripper do the work. This unique patented product has even been featured on national TV because it is capable of removing the toughest industrial coatings even though it is safe for the user and the environment. Features and Beneﬁts Easy to apply, easy to remove & clean up Paint wrinkles when job is done Odorless & won’t burn your skin NO METHYLENE CHLORIDE OR CAUSTICS Thick gel that clings to vertical surfaces Strips multiple layers of paint at a time Biodegradable, water-based, safe for the user 1 US Gallon
This unique patented product removes spray paint without harming the underlying paint. It is also very effective on permanent marker, lipstick, crayon, tape residue, ink, scuff marks, label residue, chewing gum and more! Easy to use, cleans up with water Won’t damage the underlying coating Safe - low odor, non-carcinogenic, non-toxic, will not burn skin Environmentally friendly Will not fog or streak Plexi-Glass, Lexan or glass 12 oz.
STRIPPERS AND CLEANERS Metal Paint Stripper
A new and better way to strip paint - no harsh chemicals. Simply apply a thick coat, walk away, and let our stripper do the work. This unique patented product has even been featured on national TV because it is capable of removing the toughest industrial coatings even though it is safe for the user and the environment.
SIMPLE WASH™ cleans and brightens any outdoor surface including wood decks, plastic decks and treatments, vinyl siding and gutters, stucco, concrete and ﬁberglass. SIMPLE WASH™ removes grime, mildew, water and rust stains. It rinses easily with water, and can be used on all coatings and treated lumber at recommended use dilutions.
Features and Beneﬁts Easy to apply, easy to remove & clean up Paint wrinkles when job is done Odorless & won’t burn your skin NO METHYLENE CHLORIDE OR CAUSTICS Thick gel that clings to vertical surfaces Strips multiple layers of paint at a time Biodegradable, water-based, safe for the user 1 US Gallon
* Will not harm surrounding vegetation if prewetted* Contains no bleach* Works quickly * Biodegradable, water-based formula * Concentrated - 1 gallon makes up to 10 gallons * Cleans wood, metal, plastic, concrete and more * Safe on treated lumber and wood stains * Rejuvenates removing chalky oxidized surface buildup* Removes grime, mildew, water and rust stains * Water rinse clean up * Easy to use* Will clean and etch concrete if used full strength 1.9 litre
RemovAll 610 RemovALL™ 610 is a water-based paint stripper designed speciﬁcally to remove anti-fouling and other paints from ﬁberglass surfaces. This makes it the perfect choice for pleasure boats. It is biodegradable, safer than conventional strippers, userfriendly and environmentally safe. Features and Beneﬁts... Waterbased, Fully biodegradable, Nonﬂammable, Contains no TAPs or HAPs (Toxic / Hazardous Air Pollutants) Non-carcinogenic, Safer to use than conventional strippers, Easy clean-up with running water. Low VOCs Non-ozone-depleting, Not regulated by authorities for transportation / storage, Low and inoffensive odor, Will not burn skin, Does not damage the gel coat.
Features and Beneﬁts
Removall 610 sprayable (for anti-foul) is now available as a Brush grade product called Removall 620. It is available in 1 gal. and 5 gal.pails.
Stripex Bio-Wash Stripex®-L has been proven to effectively remove oil-base wood stain sealers, semi-transparent pigmented stains, as well as gray weathered wood, mold, mildew, tannin bleeding and water stains. The water-based formula will not harm surrounding vegetation (if pre-wetted) and is quick and easy to clean up. Features and Beneﬁts Water-based formula,Quickly removes oil and water-based wood ﬁnishes, gray weathered wood, water stains, mold and mildew,Restores the natural beauty of wood •Biodegradable •Water rinse clean up •Easy to use •Safe for use around ﬂowers and shrubs if pre-wetted prior to application 1US Gallon
ADHESIVES & TAPES EPOXY STICKS
Contains resin and hardener in an easy to mix tube form. Break off a piece of the Putty Stick; kneed it and apply to the area desired. Much of the shaping can be accomplished during the working time (10 minutes). After 20 minutes the putty is cured and ready to be sanded, drilled, stained, ﬁnished or carved. Description 4 oz FastSteel ,QuikAluminum ,QuikWood,QuikPlastic InstaCrete , AuaMend, QuikCopper, QuikTitanium
Marine Tex Marine-Tex is a paste consistency that can be applied on vertical or horizontal surfaces, easily ﬁlls gaps, and can be shaped to rebuild damaged components. Marine-Tex paste provides waterproof repairs that can be used with ﬁberglass tape or cloth to bridge holes and reinforce structural repairs as needed. Emergency and permanent repairs to machinery and equipment, hulls, decks, stripped fasteners, piping and tanks are all easily accomplished. MarineTex can be sanded or ground to shape, tapped and drilled, and ﬁnished with most common paints and coatings.
Anti-Skid Tape Helps prevent slip-related injuries! Ideal for machine shops and other high-trafﬁc areas where water or grease present traction problems.Peeloff backing sticks to clean surfaces. Shown on the right as a strip/
Double Face Tape
This broad line of tapes features pressure sensitive adhesive on front and back for bonding a wide variety of surfaces in many applications, including carpet and cable hold down, materials bonding and temporary fastening.
Works well with most paint applications. Removes quickly and easily.Provides a superior paint line. Prevents seepage and paint bleedthrough.Good for general purpose apps such as sealing, bundling, where a pressure-sensitive tape is needed.
3M Spray Adhesives 3M 72 Spray Common Uses: •Bonding polyethylene sheeting •Film to ﬁlm bonding for vapour barrier protection over insulation, eliminating the use of staples •Bonding vapour barrier plastic in construction applications •Bonding carpet padding •Temporary positioning to hold ﬁlm, fabric, foam, or heavyweight paper 3M™ Blue 72 Spray Adhesive Very tacky, pressure-sensitive adhesive featuring a blue tint that helps you see where and how much adhesive is applied to a surface. It is an aggressive, yet repositionable adhesive, ideal for bonding polyethylene sheeting, ﬁlm, and foam substrates. It can handle irregular or nonlinear applications. Its variable valve provides a precise spray pattern width of 1” to 4”.
3M 74 Spray Common Uses: •General upholstery foam bonding •Bonds fabrics to foam, wood, plastics, metal or fabrics 3M™ FoamFast 74 Spray Adhesive A fast tack adhesive available in an orange and clear formula. Its high content of adhesive solids provides high coverage. It quickly bonds many soft foams and fabrics. The non-dimpling glue line provides an ideal bond line for many upholstery applications. Its variable valve provides a precise spray pattern width of 1” to 4”.
3M 80 Spray Common Uses: * Bonding ﬂexible vinyl This neoprene-based contact adhesive is fast drying and fast bonding. Featuring exceptional resistance to plasticizing oils, it forms durable, high-strength bonds to vinyl, leather, laminate, wood and most rubber and plastics.Resists temperatures over 200°F (93°C).
ADHESIVES & TAPES 3M 76 Spray
Common Uses: •Bonds fabrics and felts in industrial manufacturing •Bonds fabrics for pool tables •Bonds pipe insulation •Bonds fabrics for some vehicle “headliner” applications (not recommended for vinyl headliners) 3M™ Hi-Tack 76 Spray Adhesive A clear, fast tack adhesive with high temperature resistance, able to provide strong one-surface bonds. Its variable valve provides a precise spray pattern width of 1” to 4”.
3M 77 Spray Common Uses: •General decorating and crafts, including wreaths, silk ﬂower arrangements, models and many other projects •Home improvement and repair projects •Attaching ﬁberglass insulation and drywall corner beads •Bonding thin ﬁlms, foils and fabrics •Scrapbooking, picture framing and mounting presentations (photo safe) 3M™ Super 77™ Multipurpose Adhesive is an extremely versatile, fast-drying adhesive that bonds a wide range of lightweight materials. Its fast, aggressive tack and low soak-in make it ideal for projects all around your home or business. It forms strong bonds with everything from paper, cardboard, fabric and cushion foam to plastic, metal, wood and much more. If you can think it up, 3M™ Super 77™ Multipurpose Adhesive can probably glue it down.
Gorial Tough now on a roll. Bonds to things ordinary tapes can’t, including brick, stucco, wood and more. Made with double thick adhesive, strong reinforced backing, and a tough all-weather shell. It’s the biggest, strongest thing to ever happen to tape. Gorilla Tough is now available on a roll, and this tape is truly The Toughest Tape on Planet Earth! More than just duct tape, Gorilla Tape bonds to things ordinary tape can’t, like stucco, brick, wood, metal, smooth shiny surfaces and more. Doublethick aggressive adhesive ﬁlls in gaps for a stickier grip, especially in applications involving rough, porous or imperfect surfaces. Strong reinforced backing resists weather and rough use, offers a tighter barrier against moisture and higher UV qualities, yet can be ripped by hand. U.S.A. 2in. wide x 35 yards long
3M 90 Spray
Common Uses: •Bonding decorative laminate to tables, cabinets and shelving •Adhering kick plates to ofﬁce desks •Bonding polyethylene and polypropylene to wood, metal and other materials 3M™ Hi-Strength 90 Spray Adhesive A very strong, fast-drying, contact-like adhesive, 3M™ Hi-Strength 90 Spray Adhesive is ideal for bonding decorative laminates. Its variable valve provides a precise spray pattern width of 1” to 4”.
3M URETHANE CONCRETE REPAIR Cracks and spalls in concrete ﬂoors are an eyesore as well as a potential safety risk. Fixing them has meant either hiring and waiting for an outside contractor or doing it yourself with a repair method that takes the ﬂoor out of service for up to 24 hours. Now with 3M™ Concrete Repair, you save money and time. Easy to use. Just clean damaged area and ﬁll 1. Clean Remove all loose materials from area to be ﬁlled. Concrete should be dry and grease-free. 2. Fill Dispense product into deepest part of repair area, slightly overﬁlling. Product self-levels and is tack-free in as little as one minute. 3. Finish In as little as 15 minutes, product can be sanded to remove rough edges. It can be painted within one hour.
Gorilla glue, one of the new generation polyurethane adhesives, is amongst the most versatile glues around today, capable of gluing wood, stone, ceramics and metal. There is little that challenges its strength. It also has the added bonuses of being 100% waterproof and odourless. The glue is dark when applied but dries neutral and the timber can be varnished, stained or waxed after use and the glue line will not show: the glue accepts the ﬁnish just as effectively as the base timber will. It is also long lasting, with a 3 year shelf life and one year life once opened. Gorilla glue is heat, shock and solvent resistant and has a long open time allowing parts to be positioned before the glue “sets up”. Excess glue can be easily sanded or pared away with a chisel when dry. 2-4-8-18 and 36oz
ADHESIVES & TAPES Devcon Repair Compounds Metal Repair
High-performance, metal-ﬁlled epoxies permanently repair or rebuild critical equipment and quickly return it to service, minimizing expensive downtime and reducing costs. Metal-ﬁlled epoxies offer excellent resistance to a broad range of chemicals, good temperature resistance to 350°F, and a room temperature cure. All can be effectively applied by plant personnel without special training.
Floor Savers™ are a broad line of ﬂoor preparation products, including highperformance epoxy patching compounds and chemical-resistant coatings and anti-skid epoxies to protect plant ﬂoors, walkways, ramps, and platforms. All provide for easier maintenance, and contribute to a safer, more attractive working environment. They offer protection from harsh chemicals, solvents, alkalis, and acids, and are engineered to be 100% solids in formulation, meeting Volatile Organic Content (VOC) regulations.
Flexane®, versatile urethane compounds are used to make fast, economical, long-lasting rubber repairs to equipment such as conveyor belts and rubber rolls, and is also used to create non-damaging holding ﬁxtures, mold rubber parts, and pot electronic components. Flexane is available in liquid or putty form and its durometer is adjustable with the addition of Flex-Add™ Flexibilizer.
Gasketing - RTV
Permatex® the leader in form-in-place gasket makers, gasket dressings, and general-purpose sealants has and extensive selection of anaerobic gasket products designed to handle high temperature applications to 600°F. These products cure quickly and we offer multiple RTV technologies for your speciﬁc applications.
Threadlockers - Gel
Permatex® Threadlocker Gels are the true innovation in threadlocking! Available in Medium Strength BLUE Gel and High Strength RED Gel, the unique GEL TWIST™ and GEL SQUEEZE™ applicators leave the threadlockers where you want it…on the part. No more liquid drips or solid stick globs to deal with. No more mess to clean or costly waste to worry
Complete kit contains everything required for making professional-quality repairs in just minutes. Includes easy-to-follow instructions with photographs. Formulated to repair all plastic and metal radiator tanks. The repair resin is designed to harden within 8 - 10 minutes and cures in 30 minutes. Repairs can be made on cracks up to 4 inches (10cm) long and holes up to 3/8 inches (9mm) in diameter.
Plastic Tank Repair
Complete kit contains everything required for making professional-quality repairs in just minutes. State-of-the-art components and easy-to-follow instructions with photographs. Repairs all types of plastic tanks. The repair resin is designed to harden within 8 - 10 minutes and cures in 30 minutes. Repairs can be made ideally at temperatures from 50°F to 75°F (10°C to 24°C). Repairs cracks up to 4 inches in length and holes up to 3/8 inch in diameter. Permanent. Suggested Applications: Ideal for cars, trucks, boats and RV’s; windshield washer reservoirs, radiator overﬂow tanks, coolant reservoirs, water tanks,
Makes professional-quality repairs to most types of damaged laminated windshield glass, including bullseye’s, star damage and cracks not exceeding 12 inches (30cm) in length, in just a few minutes. No mixing is required and it cures by natural daylight. This complete kit provides everything needed for the repair including easy-to-follow instructions with photographs. Suggested Applications: Repairs bullseye’s, star damage, small spider webs and cracks (up to 12 inches long) in laminated automotive windshields
Fuel Tank Repair
Eliminates dangerous welding. Complete kit contains everything required for making professional-quality repairs in just minutes. Includes state-ofthe-art components and easy-to-follow instructions with photographs to make quick permanent repairs to leaks in all types of metal fuel tanks (NOT for use on PLASTIC fuel tanks). It repairs cracks up to 4” (10cm) long and holes up to 3/8” (9mm) in diameter. Repair will be complete when the resin cures in 30 minutes. Tank may be reﬁlled after 30 minutes or when the repair is tack free. The repair resin is designed to harden within 8 - 10 minutes and cures in 30 minutes. Repairs can be made ideally at temperatures from 50°F to 75°F (10°C to 24°C). Repairs made at lower temperatures will take longer to cure. Repairs can be made on slow leaking cracks up to 4 inches in length and holes up to 3/8 inch in diameter. Permanent. (THIS PRODUCT IS NOT FOR USE ON PLASTIC FUEL TANKS).
PLASTICS Mechanical Plastics Acetal
Acetal, ﬁrst developed in the late 1950s, is available as a homopolymer (such as DuPont Delrin®) or copolymer (suchas Ticona’s Celcon®). Delrin® resins offer superior mechanical properties including high strength and rigidity over a broad temperature range, toughness and resistance to repeated impact and good electrical insulation. The resins are used extensively in injection molding and offer excellent thermal stability, fast cycle time and low mold and screw deposit. The resins have superior dimensional stability, longterm creep resistance,long-term fatigue resistance and excellent resistance to moisture,chemicals, solvents and fuels.
High Density Polyethylene is the material used for premium cutting board used in many industrial and commercial applications, from meat packing plants to the kitchens of many of the ﬁnest restaurants. This premium thermoplastic board ispreferred in many other commercial food applications where meeting government regulations and food safety is critical.
The nylon ﬁber industry was born in 1939 when 64 million pairs of nylon stockings were sold--and to this day, most people still associate nylon with ﬁbers. However, in the 1940s and 1950s work continued on developing nylon compounds that could be molded and extruded or otherwise processed like plastics. Typical applications for nylons are in automotive parts, electrical/electronic uses, and packaging. The generic name for all synthetic ﬁbre-forming polyamides, they can be formed into monoﬁlamnets and yarns characterised by great toughness, strength and elasticity, high melting point, they also exhibit good resistance to water and chemicals. The material is widely used for bristles in industrial and domestic brushes, and for many textile applications, it is also used in the injection moulding gears, bearings, combs etc.
POLYURETHANE SHEET Polyurethane Sheet is a tough, resilient, abrasion resistance Sheet that can stand up to some of the most demanding applications from agregate chute liners to shock pads. Polyurethane sheet is available in a wide variety of size, hardness and colors in both open and precision cast forms.
PVC is extremely cost effective in comparison to other plastics with a high degree of versatility in end-use and processing possibilities. It is durable, easily maintained, and can be produced in a large range of colours. As a result PVC ﬁnds use in an extensive range of applications in virtually all areas of human activity, including medical equipment, construction applications such as ﬂexible roof membranes, pipes and window proﬁles, toys, automotive parts and electrical cabling.
Although PTFE is classed as a thermoplastic, it is not processed by conventional moulding or extrusion but by sintering PTFE powder compacted to the required shape under pressure. Applications generally exploit one or more of its unusual combination of properties; resistance to high temperatures, resistance to low temperatures, low loss dielectric properties over a wide frequency range, chemical inertness and antistick properties. The most well-known examples of its use include non-stick cookware (non-stick Teﬂon coated frying pans were introduced for Christmas 1961) and plumbers’ thread tape.
UHMW is 6 times more abrasion resistant than steel. Non-marking and nonabrasive. Low friction coefﬁcient makes it slick in any weather. Simple to install and requires virtually no maintenance. Material easily machined using standard woodworking tools. Impervious to marine borers and barnacle resistant. Doesn’t chip, peel, crack or rot. UV stabilized colors. Renders non-skid tape and paint obsolete Perfect as a walkway, platform or incline. Absorbs no water and is impervious to most chemicals. Environmentally friendly, contains no harsh chemicals. Nonconductive, nonmagnetic, and nonﬁbrous.No cold embrittlement, works from -155F to + 200F
PLASTICS HICore Sheet
Hi-core is a proﬁle sheet with 2 skins separated by vertical ribs. These ribs create a series of “ﬂutes” that run the length of the sheet. The square box shape of the ﬂutes makes the sheets rigid and strong. The skins and ribs are very thin making the sheets very lightweight, especially compared to solid sheets. This lightweight strength combines with excellent weather resistance, chemical resistance and durability to create products that can satisfy many needs in packaging, signs and glazing applications. 2x4 4x4 and 4x8 sheets
High Impact Polystyrene (HIPS)
HIPS is a low cost plastic material that is easy to machine and fabricate. HIPS is often speciﬁed for low strength structural applications when impact resistance, machinability, and low cost are required. It is frequently used machining pre-production prototypes since it has excellent dimensional stability and is easy to fabricate, paint and glue. Natural (translucent white) HIPS is FDA compliant for use in food processing applications.
Sintra: Material is closed-cell, expanded plastic, high-density poly vinylchloride sheet. It is acid free and has minimal out gassing for Archival use. Sintra is a homogeneous material that allows the ease of cutting without regard for grain. At half the weight of solid PVC, may be stapled, nailed, riveted, glued, and thermoformed. Forming may be done on conventional forming machines.Sintra is available in 9 thickness’ 1mm-13mm all thickness’ are available in white, some thickness’ are also available in black & colors.See the graphics section of your local store.
ABS sheets is the most widely used engineering thermoplastic today. ABS is formed by the polymerisation of styrene and acrylonitrile on to thermoplastic rubber which is then melt compounded with styrene acrylonitrile. The combinations of the copolymers gives ABS excellent surface appearance, stronger, stiffer and tougher than high impact polystyrene and is also superior to it in its resistance to high temperatures and chemicals. ABS can be process with ease and versatility. Can be machined, turned, drilled, milled, sawed, bored, die-cut, routed and sheared using high speed carbide-tipped tools. ABS can be machined ﬁnished by ﬁling, grinding,
Acrylic Sheet You meet acrylic sheet materials every day, all your life.it provides a clear view, lends shape and brilliance to a variety of objects, protects against rain, hail and stormy weather, withstands extreme pressure and heat, is break-resistant and faithfully reﬂects the world in all its colors. From aircraft construction and aircraft cabin windows to structural glazing, in noise barriers or in advertising. acrylic sheet materials offer the tailormade, durably brilliant solution you are looking for. Our premium acrylic sheets comes in wide range of sizes and thickness. Its characteristics include: durability, clarity, consistent quality,versatility, and outstanding performance. Optical Clarity: Our acrylic sheets have excellent lighttransmission. Clearer than glass! Will not yellow after prolonged sunexposure. Weather Resistance: Despite heat, cold, sunlight, and humidity our acrylic sheet maintains its original appearance and color.Shatter-resistant, earthquake safe, and burglar-resistant. Increase safety with windows glazed of acrylic. Light Weight: Even with its strength and durability, our acrylic sheet is only half the weight of glass.
Thickness Available Sheet Sizes 2.0 mm 49” x 97”; 51” x 97”; 61” x 97” 3.0 mm 49” x 97”; 51” x 97”; 61” x 97” 4.5 mm 49” x 97”; 51” x 97”; 61” x 97” 6.0 mm 49” x 97”; 51” x 97”; 61” x 97” 9.5 mm 49” x 97”; 51” x 97”; 61” x 97” 12.0 mm 49” x 97”; 51” x 97”; 61” x 97” WE CUT TO SIZE - CALL FOR A QUOTE
Arena Board is ideal for hockey rink applications including dasher boards, kick plates and ofﬁcial lines. Densetec Arena Board exhibits the properties of high impact strength, abrasion-resistance, and low coefﬁcient of friction. The material is also moisture, stain and abrasion-resistant. The material’s durability and UV stabilization make it ideally suited for the rigors of harsh hockey rink environments.Arena Board is available in 1/2”, 3/4” and 1” thicknesses. It is available in 50” x 100” sheet sizes. Arena Board is an extruded virgin HDPE co-polymer.It is designed for interior applications that require a product with a high gloss ﬁnish,consistent colour and a range of guages and dimensions.Arena board is ﬁnding new use in horse stable construction for its durablity.
PLASTICS SANIBOARD HDPE
Traditional wooden cutting boards are no match for boards fabricated with SaniBoard HDPE from Industrial Plastics & Paints. Wood and other materials absorb bacteria, splinter, chip, swell, peel, rot , warp bend and crack. SaniBoard HDPE eliminates those problems, substantially outlasting cutting boards from other materials. SaniBoards HDPE Cutting boards are engineered for durability, low maintenance and safety. The textured surface safely holds food in place without slipping. The natural bright white colour is favoured for its sanitary look. Knives stay sharp when cutting on SaniBoard HDPE. Instead of contacting a rigid surface that dulls the blade, SaniBoard HDPE gives on contact and because of its unique molecular structure, cuts in the board self heal and become indiscernible.
Glasbord FRP (Fibreglass Reinforced Panels) is the only FRP panel to feature Surfaseal,a sealed protective ﬁnish. Glasbord with Surfaseal is resistant to scratches, abrasions, staining and damage due to harsh chemicals. Glasbord is available in different colours and ﬁnishes and can be easilly cut and drilled for easy installation. Glasbord is perfect for a wide variety of applications where ease of cleaning, sanitation or abuse resistance is required. Glasbord is ideal for use in for foodprocessing plants, refrigerated warehouses, locker rooms, public bathrooms, daycare centres, breweries and laboratory installations. Glasbord is easy to install, tough and easy to clean wall and ceiling panel. Ask your local store for details for your project. Accessories such as colour coordinated moldings are also available to complete your installation.
Polycarbonate Sheet Polycarbonate sheet is a tough and highly impact-resistant material. It is light weight with exceptional clarity and light transmission properties. Since it is difﬁcult to break, it is useful wherever safety, security, or impact-resistance is important. Polycarbonate sheets will expand and contract with temperature changes, but will not shrink with age. Some shrinkage occurs when it is heated to forming temperature, but post forming stability is excellent. # Weatherability - It provides excellent clarity, light transmission and UV Stability for added durability. # Energy Savings - It can lower heating and air conditioning costs because it insulates better than glass.
King StarBoard® is the original marine-grade polymer and the industry standard. It is the product of a proprietary process called K-Stran,™ the most advanced manufacturing process available for producing consistently ﬂat continuous sheets. King StarBoard is environmentally stabilized to withstand the harshest marine conditions. It will not rot or discolor like teak and other solid woods, and it will not delaminate like wood laminates. StarBoard is easy to work with using standard woodworking tools, and design changes are a snap. In addition, the installed cost of King StarBoard is less than teak, other common marine woods, and ﬁberglass. Plus, our large sheet sizes maximize your yield. Boat buyers appreciate King StarBoard’s low-maintenance ﬁnish. Repair and reﬁnishing due to weathering and decay are eliminated, and cleaning is easy. King StarBoard has a handsome matte ﬁnish on both sides to hide scuffs and scratches that would show on glossy textured sheets or acrylics. # Environmentally stabilized for harsh sun and tough marine environments. # Will not rot, swell, splinter or delaminate when exposed to humidity or water. # Precise tolerances ensure consistent color, thickness and density, even for special thickness gauges and custom order colors. # Easy to fabricate with standard woodworking tools and requires little or no ﬁnishing. # Available in eight standard colors to match or accent any gelcoat. # Unlimited custom/proprietary colors. # Durable matte-textured surface on both sides. # Easy to clean and never needs reﬁnishing. # Edges ﬁnish cleanly and easily. # Forms easily for smooth curves. # Has passed the Federal Motor Vehicle Standard 302 ﬁre test required for use in motor vehicles, including motor homes. # Available in large sheets up to 54” x 96” or 48” x 96”. # Custom sheet sizes available. # Shipped with a protective masking on one side. # Proven on thousands of boats and yachts. # Experienced boat builders and boaters know the King StarBoard brand and trust it more than any other.
PLASTICS Mirroﬂex Panels
Mirroﬂex’s line of 3-D panel structures are available as ﬁre-retardant ceiling tiles or full 4-feet-by-8-feet sheets (only .032thick-similar to HPL). All products are constructed from decorated,high-impact and extremely lightweight thermoplastic. All structures are available in Mirror, Gold, Argent Silver, Cherrywood, Maple, Mahogany,or Copper ﬁnishes. The sheets can be laminated with techniques used for HPL’s, such as contact cement, or can be supplied with apressure-sensitive adhesive backing. All new designs feature bolder embossing techniques than the standard Mirroﬂex structure collection.See your local Industrial Plastics and Paints store for the full selection of Mirroﬂex products.
Polycarbonate twinwall sheeting is the perfect glazing alternative for any greenhouse application and many other construction applications. This material translates its many unique features into cost saving beneﬁts for you.This is one of the heaviest sheets of this type in the industry and is manufactured in North America by the leaders in polycarbonate extrusion research and technology. The surface of this material is protected from the degradation effects of UV radiation by a proprietary co-extrusion process. Beneﬁcial infra-red light passes through the material promoting an ideal growth environment. In addition, the resins used to make this polycarbonate are specially developed for excellent ﬂame retardant properties. Effective heat loss reductions from polycarbonate when used instead of regular glass. Savings of up to 50% have been documented while using this glazing.
Acrylic Rod Your local Industrial Plastics and Paints is your source for all of your Acrylic Rod needs,for fabrication or hobbiest alike,we have the rod stock you are looking for. Acrylic is an extremely versatile material which lends itself to a range of semi-ﬁnished products, one of which is extruded acrylic rod and tube. Primarily available in clear, its uses are as diverse as sight gauges and cake stands. The fabrication options for clear extruded acrylic rod and tube are only limited by your imagination.
Our ﬂexible tubing section offers clear and braided PVC,Polyethylene,Nylon and Micro Fuel tube in a wide variety of diameters. Our rod and tube inventory is sold priced by the foot or by the piece. See your local Industrial Plastics and Paints store for your needs.
Flexible PVC tubing offers a broad range of chemical and corrosion resistance, excellent abrasion and wear resistance, rubber-like ﬂexibility, visual contact with the ﬂow (clear pvc tubing and hose styles), and outstanding ﬂow characteristics. These include general industrial, food, pharmaceutical and medical, chemicals, fuels, oils, and mechanical applications including protective coverings and insulation sleeving.
Polycarbonate Tubing For the clarity of glass and the impact strength of metal, specify Polycarbonate Tube.Made from FDA-approved ingredients, PC tube gives extraordinary design and fabrication opportunities. It can be machined, drilled, cut and sawed, and is easily joined with solvents and adhesives. Weather Resistant, Underwriters Laboratories (UL) Ratings and Food and Drug Administration (FDA) Compliant.
PLASTICS Corner Guards - Polycarbonate
Polycarbonate corner guards are crystal clear,which makes them adaptable to any decor.They can be placed over wallpaper,paint,or hardboard without obscuring the colour and pattern. This is a great solution to minimize wall and corner damage in high trafﬁc areas and they are ideal for use in apartment buildings,care facilities and schools. Our corner guards are available in 4 and 8 foot lengths and a number of width proﬁles to suit your application.
Is your boat cockpit getting tired looking,lost the non-slip feeling.We have marine grade deck vinyl for your replacement project in 72 inch width and it’s sold by the foot,buy just what you need for your job. Our vinyl is UV stabilized for long life and mildew resistant too! Drop in and see a sample today.
Looking for a tough, durable and efﬁcient contractor trash bag that can handle all of your construction debris from wood embedded with nails to chunks of cement and plaster dust? The Demobag® is a poly-woven plastic ﬁber strengthened with ten strands per one square centimeter. Made of Polypropylene, this professional contractor cleanup bag is extremely strong and virtually tear resistant compared with conventional 6 mil plastic contractor trash bags. Need to handle heavy trash? Not a problem! Each Demobag® can handle 110 pounds of building waste and rubble. You can even overload these contractor cleanup bags, drag them over 75 feet or drop them off a building and they won’t break!
STYROFOAM* extruded polystyrene Buoyancy Billets are an excellent choice for ﬂoating structures such as docks, and rafts. STYROFOAM Buoyancy Billets consist of millions of tiny closed-cell air bubbles, each one acting as an independent buoyancy chamber. STYROFOAM Buoyancy billets are lightweight and easy to install. Each billet is 96” x 20” x 10” and will support 610 lb.
DuraFloat DuraFloat is a Floatation Foam encased in Polyethylene Sheet. This tough, durable plastic encapsulation ensures dependability and durability by preventing the foam from breaking down from exposure to the elements. Unprotected Flotation foam is susceptible to gas, oil and other contaminates that appear around docks and marinas. The natural slippery surface of the Polyethylene wrap prevents marine life such as Barnacle, Muscles and Otters etc from attaching or nesting in the foam causing loss of ﬂoatation.
Wherever there’s water, there’s an increased danger of slips and falls. Indoors or out, Our interlocking tile provides superior protection against slips and falls caused by wet ﬂoors by literally lifting foot trafﬁc above the wet, slippery surface. These tiles are constructed out of 100% recycled PVC plastic, the tile’s open grid conﬁguration generates maximum drainage and aeration and helps to retard the growth of infectious mold, mildew and bacteria. Their modular design features interlocking tabs for fast, easy installation and can be trimmed to ﬁt any shape or area.
Our panels come in a standard lightbox size,23.75 x 47.75 Industrial Plastics and Paints offers a wide variety of acrylic and styrene lighting panels for residential and commercial applications.Our selection includes panels in cracked ice, prismatic,ﬂat white mist,and egg crate louver patterns. On a work space design note,metalized parabolic louvers provide an elegant light and greatly reduce glare on computer screens.
Polyethylene bags,Polyethylene in various widths and guages on a roll,Polyethylene carpet protector strips,the list is endless.We are your Polyethylene source.
PLASTICS Cleaners & Polishes
Industrial Plastics and Paints offer three weights of Polyweave Tarps, Regular (8x8 weave), in Blue and Green, Heavy (10x10 weave) in White, and Contractors Grade (14x14weave) in Black. We have standard sizes ranging from 5x7 ft to 40x60 ft.
Novus is a great family of cleaners and polishers for the maintenance and restoration of thousands of plastic products,from motorcycle windshields,ﬂexible convertible windows, acrylic display cases, hot tubs and spas and even CD’s and DVD’s. You can also use Novus on acrylic,ﬁbreglass or cultured marble tubs,sinks,counter tops and showers
Novus 1 - Gently cleans all plastics
without scratching and leaves a shine that resists fogging.
Novus 2 is made for the removal of
ﬁne scratches haziness and light abrasions.With repeated use Novus 2 restores faded and discoloured plastics.
Novus 3 Is thebig gun,removes
heavy scratches on most acrylic surfaces that are too severe for Novus 2. (should be followed by an application of Novus 2 for ﬁnal ﬁnishing). Novus polishes may also be used with power buffers for areas that are llarge or badly damaged. 2-8-and 64 oz sizes
Farecla - Advanced Finishing System.
Polyethylene tarps are an ideal lightweight, economical covering product. Much easier to handle and less expensive than canvas, poly tarps are constructed by cross weaving strands of polyethylene yarn then laminating the material on both sides. When comparing tarp quality consider that more cross weaves per square inch results in a tighter weave which adds strength and durability to the ﬁnished product. The edge hem is reinforced with a sewn in polypropylene rope on all sides and aluminum grommets are added for tie down convenience. Poly tarps are commonly used for pool and boat coverings as well as storage and construction coverings. Designed to be lightweight yet strong, poly tarps can be susceptible to pre-mature failure from wind damage if not properly secured. Whether using a tarp to cover a roof or a log pile, remember to use as many tie down points as possible and minimize any slack
Farecla have been making world class automotive surface ﬁnishing products for over 50 years.The Farecla system is designed to produce the best result in the most efﬁcent manner,while keeping the process simple to save time and money.
Our general purpose tarps are all waterproof and are great rain covers. All our polyethylene tarps are made with high density resin with heavy duty grommets surrounding the entire perimeter of the tarp.
From preparing your surface for paint, polishing out swirls and surface scratches or giving your older vehicle a serious cut-polish,there is a Farecla product and purpose designed applicator for the job.
Our new line of Camo tarps have army Camo printing on one side and dark green on the other.Camo tarps are ideal for camping, ﬁshing, hunting, paint balling and other outdoor pursuits. They are made to the similar speciﬁcation as our economy tarpaulin with grommets at every 1 yard interval.
Farecla products clean up with water,are silicone free and won’t stain plastic or rubber trim.
Not all sizes are available at all times ,please check your local store for price and availability.
Vinyl Strip Doors Vinyl Strip Doors help to control temperature,noise and dust in an area while allowing easy access to people and vehicles. Designed to help save energy and reduce dust and noise, our strip doors are made of clear PVC and are available in 8 and 12 inch width to suit your speciﬁc application.
PLASTICS Window Film Residential - Commercial - Auto.
Industrial Plastics and Paints has access to a wide variety of Specialty Window Films that can address speciﬁc needs for privacy,decor and UV protection. Frosted ﬁlms difuse light without cutting down the ambient light levels while tint ﬁlms in light, medium, or heavy tint values that range from from 5% to 50% reduce the amount of light penetration and add a level of privacy. Now,any ﬂat glas surface can be turned into a work of art, be it an ofﬁce,restaurant,den or childs room.
Whatever your packaging need,we have a bag that is right for the job,from beads to construction waste. We stock T-shirt bags,produce bags in multiple sizes,layﬂat tubing and sealers,parts bags and we can custom print bags and banners too! Ask about case price discounts... Not all bag types and sizes are stocked in all locations.Please call your local store for availability
Moving & Storages Bags
It pays to protect what you move,store and ship.These handy Poly Mattress Bags ﬁt standard mattress and box springs for protection during moving and storage. Durable plastic slipcovers protect against dirt,soil,mildew and water damage.
Mattress bags are available in Twin, Full,Queen and King sizes.
Our new food grade drums have a removable top for cleaning and ﬁlling.They are ideal for drinking water and secure storage of dry feed. We can also install standard ﬁttings for taps and spigots.
These used barrels have been reconditioned from their original use and are ideal to non-food grade use. USe for Rainwater collection, chemical storage or ﬂotation These barrels are not food safe and can not be used for storage of drinking water or anything that will be consumed by either humans or animals.
It pays to protect what you move,store and send. These versatile Poly Sofa Protectors protect sofas up to 116 inches long during moving and storage.Waterproof one piece construction easily slips on and off... tough Polyethylene resists tears. Sofa cover is 45” x 152”
Shoe Guard One size ﬁts all shoe covers.Prevent spreading paint over ﬂoors and carpets.Great for protecting ﬂoors from debris and dirt when worn over soiled shoes.Elastic at the ankle slips on easily over all shoes and stays on snugly.
Perfect for selling, shipping and storing lightweight products.Zipper closure can be opened and closed repeatedly. Available in sizes from 2x2 up to 16x20 Not all sizes stocked in all locations. Please call your local store for availability.Some minimum sales quantities may apply
PLASTICS Bottles & Jugs
Sandbags can prevent immeasureable property damage. These strong inexpensive bags can store ﬂat and be rushed into service as soon as they are needed. Be prepare for the worse stock up now!
These HDPE Cylinder Bottles are great for hair gels, household cleaners, industrial cleaners, lab chemicals…..and countless other applications. Round Natural Polyethylene bottles from 1/2 oz. to 4 litre in size. Ask about case quantity pricing on bottles. Specialty caps : Yorker - Flip top, and Sprayers available. We also stock clear PVC Rounds in 250 ml,500ml, and 1 litre sizes.
With a multitude of closures like lotion pumps, sprayers, droppers, ﬂip top caps, etc, the round bottle selection is great for packaging products like cosmetics, hair care products from dyes to shampoos, product samples, and even water bottles. The different round container styles can be purchased in a variety of sizes and offer an easy handling shape. .
These heavy-duty and chemical resistant hand sprayers will take care of all your spraying and misting needs. Precision opaque construction with a high volume trigger sprayer that adjusts from a single stream to an almost fog like mist. Great for misting plants,feeding, etc. Buying your household chemicals in reﬁll size containers or in concentrated forms uses less packaging, saves space in our landﬁlls and saves you money!
Our Grab-N-Go Jugs combine the durability of HDPE with the convenience of a handle making transporting and pouring easier than ever.Ideal for cleaners,chemicals,concentrates and premixed liquids.
Pill bottles and vials in all sizes,individualy or by the case.We have your storage solution for all of your small bits and pieces,great for beads and crafts storage too!
We have polyweave sandbags complete with attached tie string in singles, in packs of 100 or case lots.
If you are looking for a large capacity storage tank,look no further than your local Industrial Plastics and Paints store! We have storage tanks from 225 gallons. to over 1000 gallons,that can even be truck mounted with optional support bands.They are bafﬂed to reduce sloshing too..
From organizing a hardware store to tidying up your workbench or storage closet,we have the solution for you. We have shelf bins in all shapes and sizes and racking and labeling supplies too.Put your small parts in order today! Bring us your storage problems, at Industrial Plastics and Paints.”Solutions are Possible”.
Suncast Recycle sorters
Stackable plastic sorters for your paper,tins and plastics recycling.Hinged lid locks in the open position for ease of ﬁlling.Comes with contrasting colored lid.
Handy portable, stackable storage.A great all purpose storage solution.Available in Basic Black in 16 and 24 litre sizes
ANTIFATIGUE RUBBER MATS ANTIFATIGUE & RUBBER MATS Truck Mat
A best seller in all of our locations,this rubber truck bed mat is 4x6 and ﬁts most truck boxes and protects your paint from damage and scratches.Also useful in workshops,home gyms and garages to protect ﬂoors from damage. 4x6x1/2
Bubble mats are a great anti fatigue application for small areas where there is a lot of standing in one area,in front of power tools,sorting stations and workbenches.Their 2 x 3 size makes them a good ﬁt anywhere space is at a premium and offers all of the foot and leg comfort of larger anti fatigue mats. 2x3 and 3x4
Starlite 1/8 inch
Tough, Innovative and Durable The perfect choice for your most demanding resilient ﬂooring applications. Single-ply high density sheet ﬂooring made of recycled ground rubber with 20% content of coloured EPDM rubber chips. slip-resistant, easily cleaned. Excellent sound insulation. A good selection of colours is available. Starlight is not recommended for interlocking. Recommended Applications: Fitness rooms, common areas, retail stores etc.
ScootgardT Non-Skid Mat Special PVC compound gives Scootgard superior non-skid “gripping” power. Easy to cut - custom ﬁt Scootgard for any application. Hand washable in warm, soapy water. Great for use as: Cabinet and drawer liners, tool chest liner, placemats and coasters, nonskid mat under rugs, stereos, TVs, radios, cooler, etc.
Available in both Grease Proof Nitrile (burnt orange) and Standard Rubber (black) qualities. These products come with a range of features such as: bevelled and non-bevelled edges, interlocking connectors and individual mats. Applications: Heavy duty - work stations, behind counters and general utility applications. From the kitchen to the training room, these tiles will perform under the harshest conditions.
Fingertip Entrance Mats Over 2700 rubber ﬁngers per square foot!. Traps dirt and grit in extra deep reservoir. Shake, vacuum or hose out to clean Applications: Medium to heavy trafﬁc areas. Entrance scraper mat,work station antifatigue mat, commercial or industrial applications. Roll Matting Durable Economic Protection Ribbed rubber and vinyl runners provide economical ﬂoor protection designed to give increased longevity to existing ﬂooring along with ease of maintenance The rubber runner is available in wide rib and ﬁne rib. The grease proof vinyl runner is available in wide rib only. Recommended Applications: All runner applications, light to heavy.
Sportﬂoor Lots of colour choices combined with the durable performance of resilient rubber. Décor Series offers awesome choices with the durable performance of resilient rubber. Slip-resistant textured ﬁnish combined with a solid colour and marbleized accents satisﬁes most stringent design requirements. Manufactured using a virgin rubber top-layer vulcanized to a recycled rubber base ensures a very durable, non-porous ﬂoor ﬁnish providing ideal protection and safety. Slip-resistant, easily cleaned. Excellent sound insulation. Available in a variety of colour styles. Recommended Applications: Community Centres, Hotels, Arenas, Gyms, Fitness Centres, Residential Buildings, Schools,
Long Lasting, Easy Cleaning, Non-Absorbent, Protects both Horse & Trailer. Provides Sure Footing on Ramp & Floor * Protects trailer ﬂoors and ramps * Solid 1/2” rubber * Factory cut to ﬁt most trailers * Doesn’t bunch up or curl * Lifetime OEM trailer manufacturer warranty - No wonder it’s the choice of all leading trailer manufacturers
Jan/San Products Concrobium Mold Control
Concrobium eliminates and prevents mold problems in vulnerable areas such as basements, bathrooms, kitchens, closets, laundry rooms and around windows - anywhere mold is apparent or suspected. The breakthrough solution can also be used to control mold in buildings,boats, cars, RVs - wherever mold takes hold. Application is easy. Simply apply Concrobium onto the surface, wipe off any excess and allow to dry. Because Concrobium contains no bleaches, peroxides or ammonias, it can be used on virtually any surface. And Concrobium has no odour, meaning you don’t have to open windows or vacate the area after using the product. Mold and fungal growth can damage possessions and discolour the walls, ﬂoors and ceilings in a home or building. In extreme cases, it can compromise the structural integrity of the building as it eats away at wood and drywall, causing it to disintegrate. Remediation costs to correct mold problems are signiﬁcant and growing. According to U.S. insurance industry statistics, the insurance industry paid out $3 billion in moldrelated claims in 2002, up from $1.3 billion in 2001. Canada has not been immune. Ten thousand mold related lawsuits are now in the courts in Canada. Given the losses the insurance industry has experienced with mold, there now exists a standard mold, mildew and fungi exclusion in property and commercial liability policies. As a result, homeowners and commercial property owners are often left to address mold problems at their own expense. Concrobium offers an additional level of protection against mold growth by leaving surfaces with an invisible yet durable antimicrobial coating that continually prevents fungal and mold spores from attaching and colonizing on the surface. Whether using Concrobium to clean and disinfect surfaces or pretreating vulnerable areas, this patented encapsulating action helps to ensure that harmful mold will not grow back.
A Lotion formula Hand Cleaners offer a broad range of light to medium cleaning with or without pumice. Gojo Lotion with or without pumice, provides effective soil removal with a petroleum-free citrus ingredient. Good cleaning formulas for general automotive repair facilities or DIY-er clean-up at home where a lotion-based product is preferred. 1 US Gallon
Boston building contractor Bruce Williams is one happy guy.
For years the 25-year construction industry veteran was frustrated by the fragile quality of contractor trash disposal bags. Only marginally stronger than the household garbage bag, they ripped easily and, once torn, would fall apart quickly when loaded with debris, leaving the waste strewn about and a potentially hazardous situation. So the Boston native put his imagination to work. Result: the Demobag®, a tough, durable and efﬁcient addition to the worksite. The Demobag® is woven out of biodegradable plastic ﬁber. This heavy duty 6 mil strength woven contractor bag has superior strength and sealing attributes “This construction trash bag has multiple household uses and can also solve packaging problems for some retailers.” Williams said. The Demobag®, a patent pending product, comes in a size that can easily handle over 110 pounds of debris with “no muss or fuss.” It is ideal for close quarter disposal situations such as urban interior contracting jobs where waste management is an important and expensive part of the project. The Demobag® provides superior sealing qualities and impact resistance. Williams demonstrates this to local contractors by dropping a Demobag® loaded with bricks from the top of a three story building. “Try that with an ordinary plastic contractor’s bag,” smiles Williams. appropriate for contractors and home improvement use alike.
Spray & Seal SPRAY-N-SEAL® is a water-based penetrating sealer that protects natural stone surfaces from staining. It is wonderful for stone countertops, ﬂoors, walls, vanities and even grout. This below surface sealer is also ideal for sealing all types of masonry, stucco, concrete and sanded grout. It has a special blend of polymers that bond to the stone and creates a water and oil repellant membrane to prevent staining, yet it allows the stone to breathe and release moisture vapors. It is safe for interior and exterior use and is UL Classiﬁed for slip resistance. Safe to use on food-handling areas. 8 oz 1 Qt and 1 Gallon
Jan/San Products Spray & Forget
Spray & Forget™is a revolutionary patent pending cleaner that removes green and black algae, mildew, fungus, and lichen stains from roofs, siding, decks, brick, concrete, and other exterior surfaces. Spray & Forget is a biodegradable, non-corrosive chemical that does not require damaging power washing and/or brushing techniques. In fact, no rinsing is required and your landscaping will not be compromised. Roof moss is very dangerous because it will grow underneath the roof shingle and act like a sponge soaking up water after a good rain. Eventually the moss will cause roof leaks if not treated. Roof moss also accumulates on the North side of the home or where shade is most prevalent. Roof algae, once attached to a shingled roof, feeds on the dead organic matter used in the manufacturing process of the shingle.As the fungus breaks down the asphalt shingle, the ceramic granules protecting the surface of the shingle are loosened and begin to fall off. This causes the roof to deteriorate prematurely and diminishes the roof’s abilities to reﬂect heat rays. If not treated, the roof algae will reduce the life of your roof, diminish your home’s curb appeal and increase your home cooling expenses. Roof.gif Unfortunately, traditional roof cleaning methods have used high pressure washing and/or hazardous chemical ingredients such as bleach, sodium hydroxide (Lye), copper, zinc, or acid. These techniques could damage the integrity of the roof, your landscaping and even cause harm to siding, brick, windows, gutters and awnings. Now, there is a safer product on the market called Spray & Forget TM that can eliminate these problems. Spray & Forget TM is a no-rinse cleaner and preventative. The initial removal of roof algae and moss is always more difﬁcult then the prevention of roof algae or moss once the roof is cleaned. A standard practice should be to clean your roof and then apply a preventative such as Spray & Forget TM every 18-24 months to keep the stains from returning. Roof cleaning and prevention has never been easier.
Bag To Nature
Bag-To-Nature certiﬁed compostible bags and cart liners have all the strength of conventional plastic bags. They are a quality Canadian made product designed to help reduce the amount of organic waste entering our diminishing landﬁlls. Bag-To-Nature is made from a blend of organic biopolymers which degrade completely leaving no residues and are made from renewable resources. Our brand of certiﬁed bags and liners are made in sizes from mini-kitchen bags to large cart liners. Bag-To-Nature has been engineered for disposal in backyard composters as well as today’s high tech fast action commercial and municipal composting systems. Bag-To-Nature has been tested by independent laboratories meeting ASTM standard D6400-99.
Hefty Clear Yard Bags
Hefty Leaf Bags carry a name that has been a leader in plastic bag products for decades, and the 39-gallon capacity is perfect for taking care of those larger amounts of this autumn’s leaves. It doesn’t matter if you are going to clean out the gutters of your house before the frost this winter or just rake up that immense layer of brown leaves, Hefty is the name brand for this years “get it done now” attitude.
Cape Cod Polishing Cloths
Cape Cod® Metal Polishing Cloths are moist cotton cloths, with just the right amount of polish on them. Rub lightly and remove tarnish on silver, gold, brass, copper, pewter, etc. and bring forth a brilliant mirror shine. Safe to use and there is no chemical odor ~ instead a pleasant vanilla scent. Revolutionary anti-tarnish formula means the shine lasts longer! Also available in single cloth foil pouches.
Many people spend countless hours and money cleaning their respective homes every year only to ignore one of the most visible and important parts of the home, the roof. Adding a roof algae/moss prevention program to your annual spring cleaning chores will result in a beautiful home that looks fresh and clean! 32 oz and 1 Gallon
Jan/San Products Holy Cow Cleaners
There’s an All-Purpose Cleaner for household use, an incredible Glass Cleaner, and a Concentrated Cleaner for the more stubborn cleanup jobs like oven cleaning, barbecue grill cleaning or even de-greasing an engine.
STARPOWER is a remarkably versatile multiple use concentrate that redeﬁnes the term “all-purpose”. Although it is water-based, not solventbased, and is truly environmentally safe and friendly, its performance still fully lives up to our company slogan, “Delivering Solutions”. Starpower is sold in a concetrate form and at full strength it is strong enough to remove grafﬁtti yet at a 40:1 delution with tap water it is gentle enough to wash you car without removing the wax ﬁnish. Click Here to see Video of Grafﬁti Removal
HOLY COW has a great line-up of products that clean great and smell wonderful!
These amazing cleaners contains NO solvents, NO VOCs (volatile organic compounds), NO toxins, NO alcohol, NO ammonia, NO harmful oxygen-based bleach cleaners, and NO citrus-based products which may dissolve rubber or plastics. Holy Cow Products are biodegradable and non-hazardous, so they’re safe for you and your family as well as for the environment. 32 oz.
Stardust has virtually unlimited uses as a dry absorbent that is safe in all applications. It is not injurious to soil, cement, asphalt, tile, plants, animals, or humans. It contains no reactive chemicals, is not toxic, ﬂammable, or biodegradable, and is environmentally safe and friendly. Stardust is wholly processed from an inert, inorganic mineral, amorphous alumina silicate. Due to their amorphous structure, Stardust particles provide a tremendous amount of surface area when compared to their volume. This structure allows for excellent surface tension, contributing to the exceptional absorption qualities of the product. In effect, Stardust turns the spilled liquid into a solid that can be disposed of easily. Because it is lightweight and so simple to use, it dramatically reduces clean up costs, as well as the ever-increasing costs of disposal. How to use Stardust. 1. Pour Stardust Super Absorbent™ in front of the spill NOT directly onto the spill partially surrounding it. If the spill is still ﬂowing, pour Stardust in front of the ﬂow, creating a dam. The amount of Stardust used will depend upon the amount and viscosity of the liquid spilled. 2. With a broom, push Stardust onto the surface of the spill. Then, using a ﬁrm swirling circular motion, with the broom’s bristles perpendicular to the surface, mix Stardust into the spill until the liquid is absorbed. If you did not use enough product, and it becomes saturated before the spill is completely absorbed, reapply Stardust to the spill area and repeat step two. You will be amazed as the spill disappears, and the area is left completely clean and dry. Stardust is available in a handy 3 lb pack and as a 25 lb bag.
TO USE STARPOWER : 1. Refer to the Dilution Chart on the container to determine the level of strength needed for the type of cleaning to be done (e.g. greasy engines, machinery, rust stains). Note that the 1:2 ratio is the most common one recommended. 2. Spray STARPOWER on the dirty area and wipe the dirt and grime away with a cloth. When cleaning a larger area, using a brisk circular motion (Turbulence) works best. 3. For hard surfaces like metal or concrete it is usually best to use a 3M-type scrub pad instead of a cloth (Turbulence). Then rinse the area with water or wipe it with a cloth to remove the loosened substance that was being cleaned. 4. For really stubborn areas, it may be necessary to let them soak in STARPOWER for a while (Time) before they can be cleaned. In some cases a less diluted solution will be necessary. 5. For painted surfaces, test a small inconspicuous area ﬁrst to determine the colorfastness of the paint. In some cases, color will show up on your cloth, but it may only be due to the removal of an outer layer of faded and oxidized old paint, revealing the bright fresh paint beneath the surface. On painted surfaced, rub gently, especially if you are using a scrub pad, because you could remove the paint from the surface if you rub too hard. If painted areas are soaked with STARPOWER for an extended period of time, it is likely that the paint will be broken down and removed. Therefore, do not let this happen unless you wish to remove the paint. 6. When removing grafﬁti from a painted surface, rubbing too hard will remove the grafﬁti, but may also remove the paint from the surface. Keep in mind that the grafﬁti and the surface will be cleaned layer by layer, like the layers of an onion. So watch the progress of the grafﬁti’s removal closely to prevent the removal of the paint underneath the grafﬁti. 1 Gallon Concentrate
TOOLS Roto-Zip * Create sink cutouts in laminate countertops * Cut openings in plaster without destroying wall integrity * Cut outlet openings in plywood * Cut receptacles for central vacuum cleaner installation in existing homes * Cut hole in jamb for strike plates and deadbolts (better than drilled holes) * Cutting old ﬂoor base to install new trim around door * Cultured and natural marble installation * Trimming and cutting odd angles in wood shakes * Cut holes in cement board and ﬁber backerboard without destroying integrity * Cut holes in light gauge aluminum sofﬁt * Cut ﬂoor registers in wood ﬂooring * Replace or repair wood ﬂooring / cut retroﬁtted pieces * Recess washers and nuts in studs (barn building) * Cut mixer valve and plumbing stubs in ﬁberglass tub surrounds * Cut clean grooves in foam board (exterior sheathing) * Coping some types of trim * Cut vent hole for stove hood fan * Cut specialty holes or odd shapes through wood forms for concrete * Cut perfect holes for vents, plumbing, rooﬁng * Alarm and central vacuum systems - all holes for installation (walls, ﬂoors, etc.)
Deck Sprayer A pump-action sprayer to apply cleaning solutions. You can buy one labeled “deck sprayer” or “garden sprayer,” but do not use it for spraying your garden once it has had deck cleaning chemicals in it.
The new Magnetic Mini Sweepers are lightweight, durable and easy to use. Ideal for homeowners and small shops. 30” handle make these sweepers perfect for clearing metal debris from walkways, garages and yards.
Ratchet Tie Down Set
Triple layer nylon webbing is more abrasion-resistant than single-layer straps. Flexible edge absorbs side impact to reduce cuts and tears. Ratchet has super-strong holding power and precise tension adjustment to hold loads steady. Set of four 6’L x 1”W straps with heavy-duty ratchets and hooks.
Earlex Spray Station
The Spray Station 3000 is designed for frequent decorators or DIY enthusiasts and is ﬁtted with a 575W efﬁcient taper fan motor supplying the spray gun with a constant airﬂow. This technique allows the sprayed paint to be distributed evenly despite varying viscosities, giving a fast professional ﬁnish with no brush marks. The Spray Station 3000 is ideal for use in the home, garden, workshop, and for model and craft making. This model includes two storage pods and carry handle for easy portability * Saves hours and easy to use * For use all around the home, garden and workshop * Gives a fast, professional ﬁnish with no brushmarks * Ideal for spraying cars, iron work, sheds & fences, decking, furniture, pots, arts & crafts * 2.7 metre hose * 1.7 metre mains cable * Can spray a wide variety of materials * Sprays as ﬁne as 1 inch/2.5cm * Fitted with variable output control and 3 spray patterns
3M Sandblaster * Last up to 7 times longer than conventional 3M sandpaper of comparable grits * 3M patented Cubitron™ mineral levels surfaces quickly and consistently * Flexible to conform to surfaces and hard-to-reach places * The ﬂexible backing resists heat transfer and is comfortable to handle * Washable and clog resistant * Fine Finish Guaranteed!
Nexcare DuctTape Bandaids
When we get cut, we bleed...we don’t get owwies and we don’t wear Sponge Bob or Pokemon band aids.Get the name DIY’ers know and trust Duct Tape A heavy duty bandage for cuts and scrapes. Latex free. Heavy duty durability of Duct Tape. Longer length for larger ﬁngers. Medical performance in a real Duct Tape construction. Seals out dirt & germs.
Cheng Concrete Countertops
TOOLS Tundra Extinguisher
Tundra™ Fire Extinguishing Spray is powerful and effective and easy to use, just point and spray. It works on household ﬁres including those involving paper, fabric, wood, cooking oils, electrical appliances and equipment. Tundra™ Extinguishing Spray is compact and lightweight and can be stored right on your countertop, in every room of your home or taken with you. Having it close by saves valuable seconds. Power You Already Know How To Use. Tundra™ Fire Extinguishing Spray is more effective than traditional ﬁre extinguishers on common household ﬁres.* Tundra™ Fire Extinguishing Spray’s discharge time is four times** greater than household ﬁre extinguishers allowing the user to react more quickly. Tundra™ Fire Extinguishing Spray’s unique, patent-pending design is as easy to use as other familiar household products and covers a wider surface area-up to three times*** greater than a typical actuator. Tundra™ Fire Extinguishing Spray cleanup is easy-simply wipe it away with a damp cloth. *Tundra™ Fire Extinguishing Spray has been tested to the qualiﬁed performance requirements of UL 711, UL 711A and KOFEIC 0108 by an independent Nationally Recognized Testing Laboratory (NRTL).
Fire Hose Nozzle
Jet sprays nearly 40ft and adjusts for wide soaking spray Perfect wash and rinse tool for the top of RV, Truck or house siding & windows Simple to attach to any standard garden hose.
Just as nature formed granite and marble, skilled artisans shape Geocrete™ into the sculptural, luminous, concrete forms made famous by Cheng Design. Artful compositions of gently sloping plains let water ﬂow naturally to the sink. Subtle contours cradle fruit or ﬂowers. Integral trivets and cutting boards fuse art with function — function into award winning design.
Pro Formula Mix
Announcing our NEW CHENG Pro-Formula Mix, the ﬂagship product in
our newly launched CHENG Concrete Countertop Products Line. CHENG Pro-Formula’s superior formulation combines rich color, strength and workability into an all-in-one concrete countertop mix -ideal for both professionals and do-it-yourselfers! CHENG Pro-Formula Performance: * No guesswork - just add sacked concrete mix and water * Creative control using palette of designer colors * Improved ﬂow of ideal mix into molds * Engineered formula to minimize shrinkage * Consistent results with pre-measured ingredients * Proven expertise - Fu-Tung Cheng’s 20+ years experience
110 minutes Instructional DVD (NTSC format)
Join Fu-Tung Cheng in this step-by-step instructional guide for creating beautiful and functional concrete countertops. Fu-Tung’s approachable style combined with his 20-plus years as master designer and craftsman offer easy-to-follow, proven methods for bringing your own concrete countertops to life.
Books Prevail Sprayer
Preval Spray Guns are simple, easy and inexpensive ways to spray paint or varnish. Just ﬁll and spray up to 16 ounces of any liquid. Excellent for gel coat and touch up jobs. This handy portable tool can spray all kinds of liquid solutions. Paint, lacquer, solvents, stains, oil, cleaners, insecticide, fertilizer, disinfectants... even clear water.
Concrete Countertops” Book by Fu-Tung Cheng with Eric Olsen Release date: March 2002 A home design and DIY bestseller. Fu-Tung guides you step-by-step in bringing concrete countertops to life, with advice on mold-making, mixing and pouring concrete, curing, polishing, and installing the ﬁnished concrete countertop. Also ﬁnd useful tips on maintaining concrete countertops.
Cheng Concrete Countertops “Concrete at Home” Book by Fu-Tung Cheng (with Eric Olsen) Release date: February 2005
In this brand new title, Fu-Tung Cheng shows you the anything-is-possible ﬂexibility of concrete. Clear and comprehensive text accompanies rich photographic illustrations of key fabrication techniques used by the author as he creates a series of beautiful architectural elements that includes ﬂoors, walls, columns, ﬁreplaces and countertops
CHENG Sealer is the ﬁnishing product everyone has been waiting for! Our non-toxic, water-based, high- performance sealer provides a streak-free ﬁnish and dramatically improves stain and abrasion resistance through a propri VideoImage.gif etary formula unparalleled in the industry . Its non-yellowing barrier provides exceptional ad hesion and durability, while maintain ing the natural luster of concrete.
CHENG Wax - a water-based (not VOC), food-safe wax - has been specially blended for use on concrete countertops. Made from the ﬁnest Brazilian yellow carnauba, our new wax helps prevent stains by forming a non-abrasive, durable protective layer, while leaving a lustrous shine and polish in one or more coats for added protection and depth.
Reinforce.gif C-GRID can be used in place of, or along with, steel wire mesh and light rebar. Unlike steel, carbon-grid can be placed just below the ﬁnished surface. By contrast, several inches of concrete would be required to protect steel mesh from corrosion and to prevent rust stains from bleeding through to the ﬁnished surface. C-GRID Features: * Will not rust * Easy to handle and fabricate * Provides increased ductility to concrete * Minimizes crack width and crack spread * 8 to 10 times stronger than steel by weight * Excellent bond and strengthening properties for thin concrete sections
Complement concrete’s natural aggregate with decorative inserts for a unique and custom look. Specially selected by Fu-Tung Cheng to mix and match with CHENG Pro-Formula and NeoMix Original System Product colors, these inserts are high-quality semi-precious stones that are suitable for grinding. Why Use Decorative Aggregates? If you intend to grind the surface of your concrete countertop, using decorative aggregates will add a unique, custom look in both color and visual texture. From semi-precious stones to brilliant colors of crushed glass, sprinkling decorative aggregates on the surface of molds is essential to achieving a terrazzo-like ﬁnish and enhancing the look and character of your project.
Cheng Design has developed several forms to create precise placements for faucet, sink, soap dish, drain board and other “knockouts” that will save you hours in building your countertop project.
Tools for the serious concrete professional-or for those who’d rather own than rent. Wet and dry grinders and polishers,Concrete vibrating tools,diamond grinding discs and table vibrator motors for the serious concrete fabricator and DIY user alike.
Concrete counter top FAQs For Do-It-YourselfersQ1:
Why should I entertain concrete as a material for interior applications like a kitchen or bathroom counter? Concrete is an extraordinary material that is practical, expressive, and aesthetic all at once. From a primal and formless slurry, you can transform it into virtually any shape that becomes a solid mass. The possibilities for creative expression are endless. You can grind, polish, stamp, or stain it. You can embed meaningful objects within it. I would love to make a concrete countertop as a do-it-yourself home improvement project, but can I afford it? We are glad you asked! Fu-Tung Cheng wrote Concrete Countertops not only to inform and educate professional designers and architects, but also to inspire everyone to have some fun and be creative. Our countertop products combine ingredients not generally available to the public (as they usually come in large volumes designed for professionals) for use with any high-quality sacked or bagged concrete mix. We calculated that a simple countertop measuring 2” thick x 25” wide x 8’ long should cost approximately $20-$30 per square foot. This cost includes everything you need to pour, grind, polish and seal a counter, mold materials, rental of a mixer, grinder and vibrator.
Moldex Mold Control Mold matters. Mold and mildew are not some unsightly inconveniences that can be eradicated with bleach and elbow grease. Toxic mold and mildew are killers and can destroy quality of life. The federal Environmental Protection Agency estimates that businesses lose $61 billion a year because of Sick Building Syndrome. Mold and mildew are high on the culprit list. Don’t take chances with the health and well being of your family, friends, and coworkers – even your pets. EnviroCare has spent the last decade developing and producing products that have proven effective in getting rid of toxic mold and mildew – be it basement mold, home mold, carpet mold, attic mold, crawl-space mold, deck mold. Builders also use our products for mold prevention. WE KNOW MOLD. And we know how to remove mold.
Mold and Mildew Basic Training Know thy Enemy. Mold comes in many forms – try more than 100,000 types. Commonly found indoors are Alternaria, Aspergillus, Cladosporium, and Penicillium. Black mold (also known as Stachybotrys chartarum, Stachybotrys atra, or SC) made headlines when a school was shut down and an unusual number of babies in Cleveland suffering from pulmonary hemorrhage were found to be living in homes hosting SC. Although known as black mold, stachybotrys may also be white or greenish-black. It grows on material with a high cellulose content (drywall, cardboard, wood, paper, drop-ceiling tiles) that has been wet for several days. Sometimes, Stachybotrys, like other molds, can produce chemicals called mycotoxins (myco from the Greek for fungus) that may cause asthma and lung diseases.
Moldex® Disinfectant cleans, disinfects, and deodorizes surfaces by killing mold, mildew, and odor-causing microorganisms. It is a no-rinse, one-step cleaner that is incredibly effective against a broad spectrum of bacteria. It also inhibits the growth of mold and mildew and their odors when used as directed. Moldex® Disinfectant cleaner is also registered with the EPA and designed for both household and industrial cleaning. It is also approved for use in hospitals. Available in 32 oz. trigger sprayer,64 ounce concentrate and one gallon ready to use mix.
Moldex® Protectant is a simple to use, spray applied invisible barrier that protects against the harmful effects of mold and mildew. It creates a Mold and Algae Proof Barrier that dries clear and fast. Moldex® Protectant was designed for both indoor and outdoor applications and is moisture resistant on most surfaces. Applications: Patio Furniture, Awnings, Shower Curtains, Walls, Tile, Grout, Plastic, Previously painted surfaces, Basements, Window frames, Sealed Wood, Tarps, Tents, Shingles, Roofs, Siding, Asphalt, Concrete, Foundations, Brick, Masonry, Walkways and Retaining Walls. Available in 32 oz. trigger sprayer and 32 oz concentrate hose end sprayer.
Moldex® Deep Stain Remover
Moldex® Deep Stain Remover to the rescue. It is a concentrated, multisurface cleaner that is packed with Oxygen-Power that gets rid of mold and mildew stains. It was formulated to quickly remove stubborn, embedded mildew stains that tough mold and mildew can leave behind after cleaning. Moldex® Deep Stain Remover does not contain harmful bleach, ammonia, or other harsh chemicals. It is nontoxic, has little odor, and will not harm plants or fabrics like traditional cleaners. Applications: Patio Furniture, Awnings, Shower Curtains, Walls, Tile, Grout, Plastic, Previously painted surfaces, Basements, Window frames, Sealed Wood, Tarps, Tents, Shingles, Roofs, Siding, Asphalt, Concrete, Foundations, Brick, Masonry, Walkways and Retaining Walls. Available in 32 oz.trigger sprayer and 32 oz. concentrate hose end sprayer
Moldex Paint is an interior paint designed - and guaranteed - to prevent mold and mildew growth on the painted surface for 10 years! A proprietary formulation containing FDA/EPA-compliant additives makes this unrivaled performance possible. It is so user-friendly that it is ideal for use in hospitals, food-processing plants, as well as homes and commercial buildings. Moldex® PAINT! is a premium-quality 100% acrylic paint that provides one-coat performance and exceptional wear. Applications: Kitchen, Bathroom, Tile, Showers, Carpets, Cement, Patios, Canvas, Brick, Vinyl Siding, Roofs, Counters, Sinks, Wood, Walls, Wall Cavities, Basements and Laundry Rooms Moldex paint is available in a 12 oz.spray in white and clear, 1 Gallon Can in eggshell and semi-gloss and 5 gallon pail in eggshell and semi-gloss ﬁnish
Moldex Mold Control Moldex® Deck! Cleaner
Formulated for all types of composite decking, wood decking, railings, spa surrounds, fences, siding, trim, painted / unpainted surfaces, wood, concrete, brick, stone, pavers, and more.
Use on: Composite decking; wood, OSB, and sheathing; concrete, tile, stucco, brick, and masonry; gypsum, wallboard, and other surfaces.
Moldex Deck cleaner is available as a 32 oz concentrate to make 5 gallons.
Instructions for use: When applied to patios, furniture and many other surfaces, Forsite provides a maintenance coating for mold and moisture resistance.
Moldex® Deck! Cleaner is an advanced, high-performance detergent cleaner and mildew-stain remover speciﬁcally for composite decking materials. It quickly removes dirt, grime, food stains, mold and mildew, and restores a likenew appearance. This concentrated cleaner makes up to 5 gallons and applies easily with a garden-type sprayer. It contains no bleach and can be used around plants and shrubs. Applications:
Moldex® DECK! Protector
Moldex® DECK! Protector is a 100% acrylic coating that restores natural color while providing exceptional water repellency and U.V. and stain resistance, as well as protection against common mold and mildew growth. Moldex® DECK! can be applied with a garden-type pump sprayer, brush, roller, or staining pad. And, it is backed by a 4-year limited warranty. Available in 3 natural colors plus clear. Applications:
ForSite is water-based, making it easy to apply to wood, concrete, tile, gypsum and other surfaces in a home, institution, or commercial building. ForSite is a do-it-yourself version of EnviroCare’s E-Coat technology, which is applied to wall cavities during construction to help protect from moisture and avoid costly mold remediation. Use ForSite on a new project, or around the house in areas such as crawl spaces, attics, or soon-tobe-ﬁnished basements. ForSite may also be used in conjunction with mold remediation as a ﬁnal step in restoring water-damaged building materials. Available in clear and blue.
ForSite is an easy-to-use, pemanent coating that provides long-term, residual protection against the effects of water intrusion, excessive moisture, and mold and mildew growth on surfaces. Lasts longer than any household cleaner or disinfectant. ForSite is available in 1 and 5 gallon sizes.
Formulated for all types of composite decking, wood decking, railings, spa surrounds, fences, siding, trim, painted / unpainted surfaces, wood, concrete, brick, stone, pavers, and more.
Don’t let you and your family become victims of mold and mildew. Mold is serious and health threatening. Protect your family and property by taking the appropriate steps to remove toxic mold Unlike other products, Moldex gives you professional-grade solutions that can be found in retail stores. Our products provide the three steps necessary for effective mold removal. One is to clean and disinfect mold growth. Two is removing stain and cosmetic damage caused by mold. Three, protecting surfaces from mold growth by applying an antimicrobial (mold-proof) coating. Are you plagued indoors with mold and mildew in bathrooms? Do you have basement mold? Has mold and mildew invaded your laundry room or kitchen? Moldex has the products that will work for you. And it’s nice to know that you can safely store our trigger-spray containers under the sink with other household cleaners to have on hand when you need them.
Marine Coatings SIKKENS CETOL MARINE LIGHT
A durable translucent satin protective wood treatment, formulated with a special alkyd resin and high quality synthetic UV-absorbing pigments. Identical to the Cetol® Marine but formulated with different pigments to produce a lighter appearance. For interior or exterior use. .946 litre
Sikkens Cetol Marine
Sikkens Cetol Marine is a durable, long-lasting, semi-transparent satin wood ﬁnish made of a special oil-alkyd resin combination and selected ultra violet absorbing pigments, resulting in superior weathering protection for teak and other commonly used woods found on the interiors and exteriors of boats. Cetol Marine’s use of synthetic transparent iron oxide pigments delivers maximum protection from UV rays to the wood, ensures optimum visibility of the wood grain, and enhances the appearance of the wood..946 litre
CETOL MARINE GLOSS
durable clear gloss protective exterior wood treatment, developed as a topcoat for Cetol® Marine and Cetol® Marine Light. Cetol® Marine Gloss provides all the same hard wearing and UV protecting properties of these products, as well as producing an easier to clean ﬁnish. It is used where a gloss appearance is preferred..946 litre
ANTIFOULING COATINGS BottomKote XXX
Bottomkote® XXX is specially formulated for the cost conscious boat owner requiring a good general purpose antifouling paint. Beneﬁts include: * Traditional Antifouling Protection for Most Areas * Soft Eroding Bottom Paint for Cruising Boats * Fast dry allows recoating between the tides Bottomkote XXX is particularly suited for ﬁbeglass, wood or steel boats with displacement hulls 3.78 litre
The innovative copper-copolymer formula of Micron CSC provides a controlled release of antifouling biocide at the paint surface, which means that the longevity of the coating is related to the amount of paint applied. Micron CSC will not lose its effectiveness when hauled out of the water for extended periods of time (such as winter storage). All that is needed to reactivate the paint in the spring is to wash the surface using a stiff brush or lightly powerwash.
Fiberglass Bottomkote® with Irgarol® is a hard modiﬁed-epoxy antifouling paint that provides excellent season long protection. Fiberglass Bottomkote with Irgarol® contains cuprous oxide and Irgarol®. The Irgarol® works to control weed, slime and algae fouling while the cuprous oxide works to control shell fouling such as barnacles and zebra mussels. This keeps the bottom of your boat cleaner for longer. The fast dry formula allows it to be painted and launched in the same day. Fiberglass Bottomkote with Irgarol® can be applied over any other antifouling paint and can also be wet sanded and burnished to a smooth racing ﬁnish.
Paciﬁc Sailor offers a complete line of boating ﬁnishes for both topside and bottom paints. Topside enamels protect your boat from the elements above the waterline.Paciﬁc Sailor bottom paints are specially formulated to prevent marine life from attaching onto the hull of your boat,below the waterline. Paciﬁc Sailor includes cuprous oxide formulations in three different grades that vary in their percentage of copper and a non-biocide Teﬂon bottom paint intended primarily for powerboats. Industrial Plastics and Paints is your marine coatings one-stop-shop,where “Solutions are Possible”
Marine Coatings Silent Running
Silent Running adheres to any surface and since it’s a liquid, it goes on easy like paint with a brush, roller or spray, and takes up less space and weighs less than existing sound prooﬁng technologies like mats and wraps. Just paint it on and and feel the difference. The viscoelastic properties of Silent Running liquid-based coatings absorbs the noise and vibration and converts it into low-grade heat,which is dissipated throughout the applied surface. Marine applications include bilge noise attenuation, hull vibration dampening, bulkhead noise reduction, ceiling soundprooﬁng, hatch cover noise barrier, control space sound dampening, generator enclosures vibration dampening, bow thruster noise reduction, shaft tunnels vibration dampening, and enclosure soundprooﬁng.
WR-155 Primer is a high-build, waterborne two-part epoxy primer speciﬁcally formulated as a sandable base for System Three Resins’ topcoats. WR-155 contains corrosion inhibitors and is opaque and lead-free. It will provide performance equal to its solvent-borne counterparts, in corrosion protection, ﬁlm-build and sandability. In addition, it is non-ﬂammable and contains no hazardous air pollutant solvents (HAPS) or heavy metals. It is low VOC and cleans up with water. WR-155 Primer may be used over polyester or epoxy resin surfaces, and properly prepared wood, metal, and cementitious surfaces. Use the primer to provide a smooth, uniform surface for the System Three polyurethane WR LPU Topcoat. Additionally, it may be used to help poor hiding topcoats look uniform and opaque. .946 litre
Industrial applications include superior noise reduction for vibratory sorting devices, chute vibration dampening, bin soundprooﬁng, hopper and motornoise reduction, duct work vibration dampening, mounting brackets noise attenuation, cover soundprooﬁng, and enclosure sound dampening. Architectural applications include duct work vibration dampening, trash chute noise attenuation, electrical panel noise reduction, pumps and motor soundprooﬁng, and cooling system sound dampening.Aviation applications include engine cowls vibration deadening, fuselage sound attenuation, bulkhead vibration dampening, and ﬂoor noise reduction. 1 Gallon and 5 Gallon pails
WR-LPU Top Coat WR-LPU Topcoat is a two-part linear polyurethane coating speciﬁcally formulated for maximum performance and ease of use. Available in 12 standard colors as well as clear satin and high gloss. When cured it is moisture, solvent and fuel resistant. WR-LPU contains UV absorbers and will not yellow or lose gloss for years, depending on exposure. WR-LPU product kit contains a can of paint and a bottle of crosslinking material. The paint by itself cures to a very highquality coating, without the crosslinker. However, the addition of the crosslinking material produces a tougher and more durable ﬁlm. It will be more chemical and fuel resistant, have better gloss retention and generally last longer than a ﬁlm cured without the crosslinker. Use WR-LPU for both interior and exterior surfaces. It is not intended for continuous below waterline use. Used as a clear ﬁnish without the primer, it can beautify and protect wood from discoloration and degradation. .946 litre
Marine Coatings MARINE TOPSIDE COATINGS Perfection
Perfection is the ultimate performing, 2-part polyurethane gloss ﬁnish. It provides the longest lasting, ultra high-gloss ﬁnish that has superb colour retention, together with excellent chemical, impact & abrasion resistance. It has been formulated speciﬁcally to enable amateur users to achieve professional quality results with ease on topsides, superstructure & decks. Perfection gives you: * Ultra high-gloss ﬁnish with exceptional colour & gloss retention * Longest lasting results - contains a unique package of HALS/UV† absorbers together with a chemically cured polyurethane resin system which protect against premature ageing * Exceptional durability - gives prolonged impact & abrasion protection even on the highest wear areas * Resistance to a wide range of chemicals including fuels, mild acids & detergents
Brightside Polyurethane is the most technically advanced one-part polyurethane available. Brightside now contains Teﬂon® for better resistance to staining, abrasion and easy cleaning. Brightside uses Polyﬂow 4000®, a unique polyurethane resin, which yields excellent ﬂow and leveling characteristics as well as incredible abrasion and chemical resistance. Brightside also takes advantage of the latest in ultraviolet technology which insures longer color and gloss retention. Together these technologies create a one-part polyurethane which gives the look of a two-part polyurethane with the application ease of a onepart enamel. Application Details - Brightside Polyurethane * Area - Above the waterline * Finish/Sheen - High Gloss * Number of Coats - 2 minimum * Method of application - Brush / Roller / Airless Spray / Conventional Spray * Pack sizes - Quart / Gallon (Some colours only)
Premium Yacht Enamel
These high quality, topside alkyd-based enamels have been proven performers for over 40 years. Premium Yacht Enamels are superb for yacht applications including topsides, deck and fashion striping. They are easily applied straight from the can. A tough ﬁnish is achieved that normally lasts 2-3 years prior to recoating. Application conditions are not as critical as the high performance coatings but the temperature should be above 50°F (10°C). .946 litre
An excellent, easy to apply slip resistant polyurethane ﬁnish for decks. Interdeck contains a ﬁne aggregate and will apply easily on all substrates. Interdeck gives a low sheen ﬁnish that helps protect against dazzle from sunlight reﬂected off decks. .946 litre
Bilgekote® protects bilges, lockers and bulkheads against moisture penetration and wear and tear. Bilgekote® will resist oil and fuel spillage and cleans easily. Main features are: * High opacity for excellent covering power * Hard wearing .946 litre
Schooner® combines the very best of classic varnish craftsmanship with the newest technology to create a high gloss ﬁnish with a traditional warm golden color. It contains UV ﬁlters to screen the sun’s damaging rays for remarkable durability. * Easy to apply * Warm golden color * Excellent UV protection * Schooner has excellent water resistance * Silky application and superior self-leveling properties .946 litre
Marine Coatings Spar Urethane Varnish
Spar Urethane Varnish is a high solids ﬁnish designed for marine and exterior surfaces. This product contains ultraviolet light absorbers, which offer excellent protection from sun, salt air and water. Recommended Uses: Use on boats, outdoor furniture, doors or any surface where a clear gloss is desired. Package Sizes: Quart (1850S16) Gallon (1850S24) Five-gallon (1850S30) Available Color: Very Light Amber
SilverTip Yacht Primer
SilverTip Yacht Primer is a waterborne, two-part epoxy coating speciﬁcally formulated as a tough, below-the-waterline primer for marine topcoats. Though the Yacht Primer was speciﬁcally designed for use with System Three WR-LPU and Yacht Enamel, it is compatible with most commonly available marine topcoats. It applies easily over ﬁberglass and carbon laminates, polyester or epoxy resin surfaces, and properly prepared wood, metal, and cementitious surfaces. In addition, it provides a smooth base for topcoating over epoxy or vinyester barrier coats.
Primocon is an anticorrosive primer for all underwater metal surfaces. It provides an excellent barrier to reduce pitting of the metal from galvanic corrosion. An excellent primer for antifouling paint over sanded ﬁberglass. Also suitable as a barrier/sealer coat over incompatible or unknown antifoulings .946 litre
Interlux Viny-Lux Primewash Primer Interlux 353/354 Viny-Lux Primewash is a two-part zinc chromate, vinyl butyral self etch primer, that is used as a metal conditioner for adhesion prior to application of other paints on metal.This product is best applied by spray, but can be applied by brush. Do not apply more than one coat. .946 litre
SilverTip Yacht Primer can be applied by brush, roller, or spray. For spray application, HVLP equipment is recommended. Yacht Primer offers corrosion protection over aluminum or steel, but contains no heavy metals. When cured, it sands easily to a hard, smooth surface, to help give a high-performance topcoat, like WR-LPU, the best appearance. Detailed application instructions are available in the System Three Paint Application Guide. Package Sizes and Colors: (Each kit contains 1-part resin and 4-parts hardener) Gray, Quart kit (1710K16) Gray, Gallon kit (1710K24)
Interlux Fiberglass No Sand Primer
Do away with the need to sand before applying Interlux antifouling paint by using Interlux Fiberglass No Sand Primer YPA200. Fiberglass No Sand Primer is designed to eliminate the need to sand prior to applying antifouling paint to new or unpainted boats. * No sanding is required, before applying antifouling paint. * Perfect over Gelcoats, where sanding of the gelcoat may void hull warranties. * Less Labor intensive, only one coat of primer is required. * Strong chemical bond between primer and antifouling paint, when over coat window is meet. * Ease of application use.
Wood & Concrete PENOFIN STAINS Ultra Premium Red Label Wood Finish Sico Wood Stains
Sico has an exterior stain for every application,from walls to decks,from solid to silky transparent.Show off your wood in its best light and protect its value for years to come. Industrial Plastics and Paints carries a large selection of SICO exterior stains which are formulated to perform in Canada’s harsh exterior climate. Exceptional durability is what you can expect from Sico Stain. Available in Exterior Solid Colour Acrylic Latex For Vertical Surfaces , Semi-Transparent Alkyd, Exterior Solid Latex For All Surfaces, & Exterior Solid Alkyd Wood Stain For All Surfaces. You can count on Sico Stains to deliver quality results on your exterior wood surfaces.
Ultra Premium Red Label Wood Finish is formulated for all wood species. •99% ultraviolet protection via transoxide pigments. •Added high-grade mildewcide. •Great for decks, siding, fences, gazebos, outdoor furniture, boats, docks, or any wood structure in a harsh weather environment. •Never any sanding or stripping required! Red Label Wood Finish Colors is available in six transparent tones. Red Label Wood Finish Application Tips • SHAKE PRODUCT WELL BEFORE USING. DO NOT add thinning or blending agents. • Apply Penoﬁn to a clean, dry surface. Surface must be free of dirt and sawdust build-up. DO NOT APPLY IN DIRECT, HOT SUNLIGHT (when wood is hot to the touch). • Brush on, use a stain pad, or spray on (garden or pump airless sprayers) one coat of Penoﬁn. • For maximum penetration, wait 30 minutes, then use a nap-free shop cloth and wipe the entire surface removing any excess product. • Surface will be dry to the touch in three hours and ready for use in 12 hours • When using the one-coat formula, the application is now complete. • If using the two-coat formula, wait a minimum of three hours and apply a light second coat and again wipe any excess from the entire application area.
Caution & Warnings
Sico 210 Solid Color Acrylic,for excelent durability on vertical surfaces, is high hiding and resists chalking.
Sico 212 Semi-Transparent Alkyd Stain enhances the beauty of
natural wood without concealing the grain.Durable protection for all vertical surfaces.
Sico 211 Semi-transparent Deck Stain offers durable protection while showing off the natural beauty of your wooden deck.
Sico 215 Solid Colour Deck Stain is easy to apply and offers great protection against weathering.
Sico 218 Translucent Alkyd has excellent resistance to
cracking,peeling and fading.Your wood will come alive with the richness and depth of this product.
Sico 214 Solid Latex Wood Stain is our best quality.It can be used
on both vertical and horizontal surfaces and on all types of wood. Finally there is no need to change product for siding,deck and fences.214 is formulated to hide well and offers a great satin ﬁnish.
• Combustible - keep this product away from heat, open ﬂame, and sparks. • Beware of spontaneous combustion. Make certain all rags or other materials used with Penoﬁn are soaked in water, stored in an air-tight container, or otherwise disposed of safely. Gallon Coverage Smooth surfaces: 200-300 square feet. Rough surfaces: 125-175 square feet a gallon of Red Label Wood Finish.
Wood & Concrete Penoﬁn Marine Oil Finish Penoﬁn Marine Oil Finish is used for boats, docks, marinas, or wherever wood is exposed to harsh conditions. Good for all wood species. * 99% ultraviolet protection * Added high-grade mildewcide for marine conditions * Eliminates need to varnish * Hand-rubbed look Marine Oil Finish Colors Available in transparent, natural tone.
Marine Oil Finish Application Tips · SHAKE PRODUCT WELL BEFORE USING. DO NOT add thinning or blending agents. · Apply Penoﬁn to a clean, dry surface. Surface must be free of dirt and sawdust build-up. DO NOT APPLY IN DIRECT, HOT SUNLIGHT (when wood is hot to the touch). · Brush on, use a stain pad, or spray on (garden or pump airless sprayers) one coat of Penoﬁn. · For maximum penetration, wait 30 minutes, then use a nap-free shop cloth and wipe the entire surface, removing any excess product. · Surface will be dry to the touch in three hours and ready for use in 12 hours · When using the one-coat formula, the application is now complete. · If using the two-coat formula, wait a minimum of three hours and apply a light second coat and again wipe any excess from the entire application area. · Penoﬁn’s Marine Oil Finish seals and protects the mill- bright beauty of natural wood. · Multiple coats may be wet-sanded to build a lustrous self-ﬁlling, handrubbed ﬁnish giving it that hand-rubbed look mariners prefer.
Caution & Warnings
· Combustible - keep this product away from heat, open ﬂame, and sparks. Beware of spontaneous combustion. Make certain all rags or other materials used with Penoﬁn are soaked in water, stored in an airtight container, or otherwise disposed of safely. Gallon Coverage 200-300 square feet Marine Oil Finish Performance Expect 3-5 years on vertical surfaces, 1-2 years on horizontal surfaces depending on use and weather exposure.
PENOFIN WOOD PREP SYSTEM Penoﬁn ProTech Step1 Specially developed to effectively remove oil and latex ﬁnishes on all exterior wood, composite or concrete surfaces using New Clean Strip Technology. Pro-Tech Stripper leaves little or no residue, will not raise grain and provides double the coverage of average strippers. This product is ready to use, 100% Biodegradable, nonﬂammable and CERTIFIED NO VOCs. Pro-Tech Stripper is the ﬁrst step in preparing your wood for a beautiful Penoﬁn application. Application: Shake product well before using. Do not thin or blend with other products. Wet the surface to be stripped. Apply a generous coat with a brush, roller or garden sprayer. Penoﬁn Pro-Tech Stripper will soften and or dissolve most coatings in 15 - 30 minutes. Keep the wood surface wet by occasional misting. Scrub the surface with a nonmetallic bristle brush or long-handled push broom. Rinse thoroughly with water using a garden hose with a spray attachment (pressure washing is not recommended). To achieve best results for perfect preparation for Penoﬁn wood ﬁnish, followup with Penoﬁn Pro-Tech Cleaner (Step #2) followed by Penoﬁn Pro-Tech Brightener (Step #3).
Penoﬁn Pro Tech Step 2 The best outdoor cleaner for just about everything, this unique formula uses Super Hydrogen Power to tackle almost any cleaning job around your home. Mix these concentrated granules in varying strengths to effectively remove grease, grime, dirt, organic stains, tree sap and mineral deposits. Kills mold and mildew. For use on wood, masonry, concrete, ﬁber cement, ﬁberglass, outdoor furniture, cushions and ﬂoor coverings, glass and tile. This container contains enough Penoﬁn Pro-Tech Cleaner to produce 16 gallons. of Hydrogen Power. This product is biodegradable, nonﬂammable and contains no VOCs. Application: Pour one to two cups of Penoﬁn Pro-Tech Cleaner’s hydrogenated crystals into one gallon of clean water and mix. Mist the surface with a garden hose and sprayer. Using a pump up garden sprayer, brush or mop, apply the solution liberally. For best results DO NOT ALLOW THE SOLUTION TO DRY ON THE SURFACE. Mist occasionally and agitate with a broom or nonmetallic stiff bristled brush for ten to ﬁfteen minutes. Rinse thoroughly with water. For mildew removal, driveways, garage ﬂoors, and really big messes: Wet the surface to be cleaned and sprinkle directly with Penoﬁn Pro-Tech. Agitate the area with a broom or stiff bristle brush for at least 15 minutes. Rinse thoroughly.
Wood & Concrete Penoﬁn Pro Tech Step 3
Eliminates tough tannin stains and watermarks on all types of wood decking siding and fences; removes mill glaze. Penoﬁn Pro-Tech Brightener reestablishes the Ph balance of your wood after stripping and cleaning and brightens gray weathered wood to bring back that mill-bright color. This package contains enough Penoﬁn Pro-Tech Brightener to make 16 gallons of brightening solution. This product is biodegradable, nonﬂammable and contains no VOCs. Application: Pour two cups of Penoﬁn ProTech Brightener into one gallon of clean water and mix. Wet the surface with a garden hose and sprayer. Using a plastic pump up garden sprayer, apply the solution liberally. Wait 15 minutes and let it do the work for you. DO NOT ALLOW THE SOLUTION TO DRY ON THE SURFACE. Scrub and rinse thoroughly with water. ALWAYS WEAR RUBBER GLOVES, EYE PROTECTION, AND SOLID SHOES WHEN APPLYING. SURFACE WILL BE SLIPPERY. DO NOT INHALE POWDER. DO NOT MIX IN A METAL CONTAINER. DO NOT STORE DILLUTED SOLUTION. DO NOT MIX WITH CHLORINE BLEACH OR OTHER CHEMICALS. HARMFUL OR FATAL IF SWALLOWED. CAN CAUSE EYE AND SKIN BURNS. Average gallon coverage: Roughly 300-400 square feet depending on surface type. This container will make about 16 gallons of cleaner. Cleanup and storage: Thoroughly rinse all equipment with water. Store any Penoﬁn Pro-Tech Brightener in its original container in a dry place. Do not transfer to a metal container as it will cause a reaction. For disposal of unused product and empty containers, contact your local household refuse collection service.
PENOFIN CONCRETE STAINS STAIN INSPIRED BY NATURE TO BRING ARTISTRY TO CONCRETE AND MASONRY Penoﬁn Concrete and Masonry Cleaner & Etcher
Concrete and masonry surfaces are porous, chalky, alkaline, and need good surface preparation. Since preparation is the key to success, leave nothing to chance. Try new PENOFIN Concrete & Masonry Cleaner to remove all dirt and mildew then follow with Concrete & Masonry Etcher to ensure great results!
Penoﬁn Concrete & Masonry Top Coat
For that ﬁnal touch, ﬁnish with PENOFIN Concrete and Masonry Top Coat for extra long-lasting protection. Top Coat will provide a clear satin-ﬁnish that will add years of life!
Penoﬁn Concrete & Masonry Stain
Made with the highest quality resins and pigments available, PENOFIN Concrete and Masonry Stain will add long-lasting durable beauty, color and interest to any concrete or masonry application around the home. It is an inexpensive way to add beauty to your home both inside and out. * Low VOC * Quick-Drying * Easy Soap-and-Water Cleanup * For Concrete, Fiber Cement, Stonework * Eight Concrete & Masonry Stain Colors: Sandstone, Slate, Bluestone, Egytian Alabaster, Serpentine, Dolomite, Soapstone, & Terracotta
Wood & Concrete Penoﬁn® Concrete and Masonry Products
What is Penoﬁn’s Concrete and Masonry Stain?
Penoﬁn’s Concrete and Masonry Stain is a 100% acrylic water-based formula to add durable long lasting beauty to concrete or masonry. The ﬁnish is designed to complement the unique differences in color and texture of concrete. Perfect for driveways, patios, garage ﬂoors, sidewalks, and basement ﬂoors and other types of concrete or masonry surfaces.
What is the most important step for a successful concrete or masonry staining project?
Surface preparation, the key to any successful paint or stain application, is particularly important to concrete and masonry ﬁnishes.
How do I prep the surface?
Always start with a clean, dry, rough surface by using Penoﬁn’s Concrete and Masonry Cleaner and Penoﬁn’s Concrete and Masonry Etcher to ensure a durable long-lasting ﬁnish.
Can I use this both inside and outside?
Yes. Penoﬁn’s Concrete and Masonry Stains are perfect for both interior and exterior applications.
Will it prevent stains on my concrete?
Penoﬁn’s Concrete and Masonry Stains will help prevent stains from saltwater, brake ﬂuid, transmission ﬂuid, motor oil, bleach, and gasoline. The ﬁnish has been developed to resist hot time pick up, and has a high quality mildewcide to inhibit mildew growth on the stained surface. Penoﬁn Concrete and Masonry Stains also resists wear from foot and car trafﬁc.
How do I apply?
Stir thoroughly before and several times during application from the bottom up. Use a pump-up garden sprayer, brush, or roller. Minimum temperature for application is 45 degrees. Do not apply when the surface is hot to the touch or stain will not properly penetrate. Apply only if rain is not likely in the next 24 hours. Concrete type, texture, and color will affect ﬁnished appearance.
What’s the coverage? 250-300 square feet per gallon
Do I always need to use a sealer?
Yes. A sealer will give the ﬁnish added protection and durability.
Can I use this on new concrete or stucco?
New concrete must cure for a minimum of 28 days before applying.
What’s the best way to clean / maintain?
The best way to clean and maintain is to sweep or hose down frequently and twice a season or more often if you wish use Penoﬁn ProTech Cleaner according to the instructions on the bottle.
GREEN PRODUCTS Sico Ecosource
Designed with a formula excluding volatile organic compound, ZERO VOC, Sico Ecosource emits no offensive odour and reduces to ZERO adverse effect on the ozone layer. This new high performance 100%acrylic latex paint has minimal impact on the ecosystem. Furthermore, this paint is perfectly adequate to meet environment plans and speciﬁcations. It is the No. 1 choice to obtain LEED certiﬁcation. • Zero-VOC formula • No unpleasant odours • 100% acrylic latex formula • Washable with water • Easy to apply • Superior performance • Durable, resistant ﬁnish • Superior adhesion • Excellent hiding power (520 to 620 sq2/3.78L) • Resist to freeze/thaw cycles • In compliance with Canada Green Building Council’s standards for LEED project certiﬁcation.
Bag to Nature
Bag-To-Nature certiﬁed compostable bags and cart liners have all the strength of conventional plastic bags. They are a quality Canadian made product designed to help reduce the amount of organic waste entering our diminishing landﬁlls. Bag-To-Nature is made from a blend of organic biopolymers which degrade completely leaving no residues and are made from renewable resources. Our brand of certiﬁed bags and liners are made in sizes from mini-kitchen bags to large cart liners. Bag-To-Nature has been engineered for disposal in backyard composters as well as today’s high tech fast action commercial and municipal composting systems. Bag-To-Nature has been tested by independent laboratories meeting ASTM standard D6400-99.
All-Purpose Cleaner Over 30 years ago, concentrated Simple Green® All-Purpose Cleaner was formulated for the industrial marketplace....but it kept ﬁnding its way back home! Customer satisfaction, loyalty and demand have since put the Simple Green “family” of popular convenient sizes in retail stores nationwide! The makers of Simple Green have spent over $3 million to verify the safety claims and unique formulation. Concentrated Simple Green had it right from the start. An environmentally-sensitive non-toxic cleaner/degreaser that really works and can be economically custom-diluted for many, many different uses. From ﬂoors and walls to pots and pans, from windows to sinks and drains, from stained carpets to greasy tools, it only takes a little Simple Green to get big jobs done around the house. 16 oz 32 oz.
HOLY COW has a great line-up of products that clean great and smell wonderful! . These amazing cleaners are biodegradable and non-hazardous and contain NO solvents, NO VOCs (volatile organic compounds), NO toxins, NO alcohol, NO ammonia, NO harmful oxygen-based bleach cleaners, NO citrus-based products which may dissolve rubber or plastics. It is also biodegradable and non hazardous, so it’s safe for you and your family as well as for your animals. You’ll be amazed when you see for yourself how well they work. THAT’S WHY WE CALL IT... HOLY COW!!! 32 oz. trigger sprayer
The Wind ‘N Go
Flashlight batteries always seem to die at the worst possible times, with replacement batteries nowhere to be found. The Wind ‘N Go ﬂashlight eliminates this problem with its ingenious wind-up technology. Winding up the ﬂashlight generates power in the rechargeable battery so that you never have to change it. One minute of winding gives you about 60 minutes of light. The ﬂashlight has three super-bright LED bulbs; the off-on button allows you to use all three LEDs for high illumination or just one for low illumination. LEDs are designed to be more reliable, durable, and long-lasting than regular ﬂashlight bulbs, which means you can depend on this crank ﬂashlight in real emergencies like hurricanes and power blackouts.
Rain Barrels and Fittings
Harvesting Rainwater with Rain Barrels, an Old Idea with a New Following Collecting rainwater for use during dry months in rain barrels or other depositories is an ancient and traditional practice. Historical records show that rainwater was collected in simple clay containers as far back as 2,000 years ago in Thailand, and throughout other areas of the world after that. With the rising price of municipal water and drought restrictions now facing much of the United States during the summer months, more and more homeowners in our own modern society are turning to the harvesting of rainwater to save money and protect this precious natural resource.
GREEN PRODUCTS Gojo Orange Cleaner
Everyone has their favorite cleaner, and Gojo is ours. We like the mild orange scent, the abrasive action of the pumice, and the fact that it doesn’t leave your hands feeling either greasy or dry. We keep a small bottle at one sink, which we reﬁll from the gallon pump bottle at the other sink. One excellent design feature is that each bottle comes with a handy nail brush that clips onto the side of the bottle. Gojo is great for after you’ve packed your bearings and you’re ready to get the grease off your hands. It really shines for cleaning up after ﬁxing a ﬂat on your bicycle. It can be used for cleaning dirty and greasy parts as well. One US Gallon Pump
KLENK’S BATHTUB REFINISH
Keep your tub out of the landﬁll!
Fibreglass & Plastic
Water-based, 2-part epoxy coating restores a durable, like-new gloss ﬁnish on plastic and ﬁberglass surfaces, like tub surrounds, without the fumes and mess of solvent-based epoxy ﬁnishes. 2- to 3-hour dry time between coats, 3- to 5-day complete cure time. Includes 1quart epoxy coating, surface cleaner, non-latex disposable gloves, stir stick, tack cloth, roller and brush, 220-grit wet/dry sandpaper, and illustrated instructions.
Dynamic Paint Products Inc. proudly introduced the ﬁrst paint roller made from the world’s only polyester ﬁlament yarn originating from 100% post consumer plastic bottles - the Enviro-Roller™. The recycled fabric’s superior performance characteristics make it particularly suitable for weaving into long lasting, lint free roller reﬁlls. Carefully winding the fabric on to 100% recycled plastic cores at our Mississauga manufacturing facilities has allowed us to create the Enviro-Roller™ – a true innovation whose time has come.
The Enviro Paint Brush™
is a quality brush that can be used, cleaned (actually more efﬁciently), and re-used like most other paint brushes. However, once it comes time to replace it, its unique design allows the user to change only the bristle reﬁll. Saving the handle will typically reduce the amount of waste by over 50%. For painters who are concerned about the environment the Enviro Brush is a deﬁnite step in the right direction. 1.20”, 1.75” and 2.50”
Prolan is an environmentally friendly lubricant with amazing staying power, outlasting many other products. Prolan protects against corrosion and is great for indoor and outdoor use – Agricultural – industrial – marine –mechanical – electrical -household. Use Prolan in place of your existing industrial lubricant on chains, bolts, tools, chassis of 4WDs, quadbikes, motorbikes trailers, concrete & fertilizer machinery, sporting equipment, guns, anodized window frames, hinges, latches, sawblades, locks, lawnmowers and gardening equipment. Prolan is non-conductive, making it great for electrical work and Prolan’s anti-spatter properties make it excellent for cutting, welding, or drilling work. Our Prolan grease is an excellent anti-seize and great for bolts, nuts, threads, terminals, rubber seals, o-rings, hoses & ﬁttings, and welding nozzle dip. As a marine lubricant Prolan will protect your trailer springs and boat motors it will not eat your rubbers or wiring and salt water will not penetrate it.
Suncast Recycle Bins
These home recycling bins are stackable to save space, and covered to help keep odors in and the area immaculate. Plus, the front ﬂap is hinged for easy access--you don’t even have to unstack the bins--and the ﬂap will stay open if you want it to. Handgrips on each side make the recycle container easy to carry. Stack the recycling bins close by, or line them up side by side (with or without lids) in the kitchen, garage, or utility room. These home recycling bins come in three different colors so you can easily sort your recyclable items such as glass, plastic, and cans. You can also use these sturdy containers as colorful storage bins for pet food, toys or sports gear. The heavy-duty polypropylene construction withstands extreme temperatures, and washes clean easily with soap and water.
Boat Care Products Inetrlux Boat Care Products Interlux Wax Sealer
The best way to keep ﬁberglass, metals and painted surfaces looking new is to apply a thin coating of Interlux UV Protectant & Teﬂon Wax Sealer. This revolutionary product provides a hard, durable, low friction surface that seals, protects and prolongs the life of wax, gelcoat, ﬁberglass, metals and painted surfaces. It does this by a chemical reaction, its thin ﬁlm formula hardens over twenty-four hours to protect and lock out harsh contaminants 500ml.
Interlux Boat Soap
Interlux All-Purpose Boat Soap with Wax is an environmentally friendly concentrated wash and wax formula that leaves surfaces shiny and water repellant. It is also safe for use on all surfaces including ﬁberglass, wood, metal, plastic, glass and paint, so it can be used regularly without affecting your ﬁnish or wax protection 500ml.
Interlux Teak Oil Interlux Teak Restorer
An environmentally friendly water-based formula that safely cleans and brightens teak in one step, revealing its natural color and grain. Unique water-based formula requires no heavy rinse and will not bleach, damage or raise wood grain. Interlux Premium Teak Restores is also safe to use around ﬁberglass, wood, metal and painted surfaces 500ml.
A traditional Scandinavian blend of oils for ultimate protection against the elements. Its deep penetrating formula brings weathered teak back to life and protects against damaging UV rays. Interlux Premium Teak Oil also contains a rust inhibitor, protecting metal and deck hardware from rust. It is easy to apply, fast drying and has a warm golden color for exterior and interior use. Can be applied to damp or dry wood, for best results apply to dry wood. Safe for use around ﬁberglass, wood, metal and painted surfaces 500ml.
Interlux Rubbing Compound Interlux Stain Remover
Interlux Heavy Duty Stain Remover is a reactive gel formula so there is no need to rub or scrub the stain or grime you are working on. Just apply Heavy Duty Stain Remover and let it do the rest. Best of all Heavy Duty Stain Remover is safe and great for use on non-skid decks, gelcoat, ﬁberglass, wood, metals and painted surfaces 500ml.
Interlux Marine Wax
One step cleaner wax with Teﬂon that cleans polishes and protects. Teﬂon provides ease of cleaning and a super low friction, non-stick surface, for ultimate protection against UV rays, water, dirt, grime, oil and salt. It leaves a high gloss dirt repellent ﬁnish that can be applied by hand or with electric buffer. Safe for use on ﬁberglass, wood, metal and painted surfaces. 500ml.
Interlux Light Duty Rubbing Compound removes light scratches, minoroxidation and restores ﬁnish to topsides. Its unique formula is aggressive and safe for use on ﬁberglass, wood, metal and painted surfaces and can be applied by hand or with electric buffer. 500ml.
Boat Care Products Meguiars Bot Care Products
Meguiars Gel Wash
Biodegradable wash lifts boat scum, dirt, salt spray, grime, bird droppings and other loose contaminants. Sheeting action greatly reduces drying time. Does not strip wax.Suitable for all of your Boat and RV cleaning needs! 16 oz 1 gallon
Meguiars Quick Spray Wax
Wax your boat as you dry to create a brilliant gloss and add wax protection. Use on wet or dry surface. Quickly and easily maintains gloss between periodic waxings. Suitable for use on ﬁberglass, painted surfaces, stainless steel, clear plastic and other non-porous surfaces (Do not use on glass windows). Use wax only after the surface has been cleaned and restored to a “like new” or “average” ﬁnish.500ml.
Meguiars Cutting Pads Foam cutting action without leaving marks created by wool pads. Removes moderate surface imperfections. Exclusive foam cell structure improves air ﬂow. Quick change Velcro® backing system.
DEVCON Metal Repair
High-performance, metal-ﬁlled epoxies permanently repair or rebuild critical equipment and quickly return it to service, minimizing expensive downtime and reducing costs. Metal-ﬁlled epoxies offer excellent resistance to a broad range of chemicals, good temperature resistance to 350°F, and a room temperature cure. All can be effectively applied by plant personnel without special training
Plastic Steel® Putty
Patch and repair areas where welding or brazing would be undesirable or impossible with Plastic Steel®, the original metal-ﬁlled epoxy putty used for hundreds of routine maintenance, production, and tooling applications. KEY FEATURES * Bonds to most metals, concrete and some plastics * Cures at room temperature and forms a tough durable metallic mass that can be drilled, tapped, machined or painted * Excellent resistance to oil, gasoline, water and many chemicals 1lb. 4 lb. 25lb.
Ceramic Repair Putty
Smooth, trowelable, alumina-ﬁlled epoxy compound for rebuilding and protecting processing equipment exposed to corrosion, erosion, cavitation, chemicals, and acids. 1lb. 4 lb. 25lb.
Plastic Steel® Liquid (B)
Steel-ﬁlled liquid epoxy that can be cast over models for accurate detail reproduction when making holding ﬁxtures, light-gauge forming dies and molds. KEY FEATURES * Hardens in about an hour * Can be machined to close tolerances * Low viscosity and high compressive strength * Ideal leveling compound for machinery and equipment 1lb. 4 lb. 25lb.
Plastic Steel® 5 Minute® Putty (SF)
Fast-curing, steel-ﬁlled epoxy for dependable emergency repairs in less than one hour. KEY FEATURES * Hardens in one hour * Mixes, applies, and cures at temperatures as low as 40°F * Cures to a tough, steel-ﬁlled material * Can be machined, drilled, tapped, or sanded
High-technology, titanium-reinforced epoxy, engineered for making repairs to machinery and equipment that can be precision machined. KEY FEATURES * Excellent temperature resistance (350°F) * High compressive strength (18,800 psi) * Resistance to chemicals and most acids, bases, solvents, and alkalis * Qualiﬁes under Mil Spec DOD-C24176(SH) Type I & II 1lb. 2 lb.
Aluminum Putty (F)
Aluminum-ﬁlled epoxy putty for dependable non-rusting repairs to aluminum castings, machinery and equipment widely used in HVAC applications. KEY FEATURES * Repairs air conditioning system components * Listed under NSN Stock #8030-00051-4511; #8030-00-670-8553 * Bonds to aluminum and many other metals * Fills porosity in aluminum castings * Can be machined drilled or tapped uing conventional metalworking toolsl. 1lb. 3 lb.
Stainless Steel Putty (ST)
Stainless steel-ﬁlled epoxy putty for patching, repairing and rebuilding stainless steel food processing equipment KEY FEATURES * Non-rusting * Bonds to ferrous and non-ferrous metals * NSF certiﬁed for potable water applications * Acceptable for use in meat and poultry plants 1lb. 3 lb.
Bronze-ﬁlled epoxy putty for repairing bronze and brass bushings, shafts, castings and equipment parts. KEY FEATURES * Repairs and rebuilds areas where brazing would be undesirable or impossible * Bonds securely to bronze alloys, brass, copper, and ferrous metals * Uses conventional metalworking tools to machine, drill, tap, or grind 1lb.
DEVCON Brushable Ceramic White
Low-viscosity, alumina-ﬁlled, brushable epoxy compound, when applied to a 15-20 mil coating, provides a smooth protective barrier against wear, abrasion, corrosion, erosion, and chemical attack. KEY FEATURES * Temperature range up to 350°F * 3 colors (red blue white) to insure uniform coating * White is NSF-certiﬁed for use in potable water applications * Low-friction surface reduces turbulence, wear, and cavitation * Red and white formulas are acceptable for use in meat and poultry plants * Outstanding chemical resistance to acids, solvents, and alkalis 2 lb
Wear Resistant Putty (WR-2)
Smooth, non-rusting, all-purpose epoxy putty for repairs requiring low-friction ﬁnishes, such as machine lathe beds. KEY FEATURES * Bonds to steel, iron, aluminum, ceramic, concrete, brass, and some plastics * Contains wear-resistant ﬁllers for low friction applications * Also available in liquid form 1lb. 3 lb.
Cleaner Blend 300
Safe, multi-purpose degreaser for use on heavy grease and oil deposits on metal. KEY FEATURES * Needs no rinsing; leaves no residue * Evaporates fast * Ideal for dip tanks 1 pint.
Floor Savers™ are a broad line of ﬂoor preparation products, including high-performance epoxy patching compounds and chemical-resistant coatings and anti-skid epoxies to protect plant ﬂoors, walkways, ramps, and platforms. All provide for easier maintenance, and contribute to a safer, more attractive working environment. They offer protection from harsh chemicals, solvents, alkalis, and acids, and are engineered to be 100% solids in formulation, meeting Volatile Organic Content (VOC) regulations.
High-performance, alumina-ﬁlled epoxy for making fast, dependable emergency repairs to leaks in pipes carrying ores, coal, cement, sand, and gravel. KEY FEATURES * Hardens in 5 minutes * Economical and convenient * Applies in temperatures as low as 40°F 3/4 lb.
Fasmetal™ 10 HVAC Repair
Aluminum-ﬁlled epoxy adhesive conveniently packaged in two 6 1/2 oz. tubes. KEY FEATURES * Bonds to aluminum and other metals, ceramics, woods, concrete or glass * Repairs coils in compressors * Hardens to a rigid bond that can be ground, drilled, or tapped * Fills voids or porosity in aluminum castings 6.5 oz.
All purpose concrete patching compound with a compression strength of 8000 psi, three times the typical strength of concrete. KEY FEATURES * Easy-to-mix and apply * Excellent adhesion to a variety of substrates including concrete, brick, masonry, metal, or wood surfaces * Excellent resistance to water, oils, solvents, and alkalis * Functional cure in 8 hours; full cure in 16 hours * Acceptable for use in meat and poultry plants 10 lb. 40 lb.
DEVCON Floor Patch™ (Fast Cure)
A fast-curing version of dependable Floor Patch™ with all of the characteristics of the regular product. KEY FEATURES * 15-minute pot life allows repair to be back in service in 3 hours * Primer system allows bonding to wet surfaces and at temperatures below 40°F * Acceptable for use in meat and poultry plants 10 lbs.
Heavy-duty, premium ﬂoor patching system with excellent chemical resistance. This premium patching system includes a surface priming system for superior bonding to existing concrete or other surfaces. KEY FEATURES * Compression strength of 9000 psi * Outstanding resistance to acids, alkalis, water, oils, solvents, and most chemicals * Non-sag characteristics ideal for vertical applications * Easily trowelable for a non-porous ﬁnish* Full cure in 16 hours * Acceptable for use in meat and poultry plants 35 lbs.
Deep Pour Grout™
A ﬁlled epoxy group designed for rebuilding worn concrete or pouring equipment pads up to 6” deep. KEY FEATURES * Easy-to-mix; self-leveling * Low shrinkage maintains critical dimension * Bonds to metal and concrete * Resists most industrial chemicals * Acceptable for use in meat and poultry plants. 3.1 lbs
Epoxy Coat™ 7000 (Non VOC)
100% solids (no volatile organic compounds) self-leveling ﬂoor coating that can be applied to smooth or mildly spalled concrete, producing an extremely durable and attractive chemical-resistant ﬁnish. KEY FEATURES * Silica aggregate can be added to rebuild ﬂoors that need a “high build” coating of 1/8” or greater * Safe-T-Grit 300 or Anti-Skid Silica (food grade) can be added to the mixture to provide a nonskid surface * Acceptable for use in meat and poultry plants 2 Gal.
Epoxy Concrete Sealer
100% solids epoxy that provides a durable, chemical-resistant coating. Can be a primer system for damp surfaces. KEY FEATURES * Self-leveling; easily applied with a brush roller or squeegee * Outstanding resistance to many chemicals including acids, alkalis, oils, gasoline, and jet fuel * Can be applied at temperatures as low as 40°F * Acceptable for use in meat and poultry plants 2 Gal.
Heavy-duty epoxy compound with silicone carbide granules, for an exceptional non-skid surface on walkways, ramps, loading docks and stairs. Brushed or rolled on, silicon carbide granules are then broadcast over the surface to provide a superior non-skid ﬁnish. KEY FEATURES * Bonds to damp surfaces and exhibits excellent adhesion to concrete, brick, steel, and aluminum * Can be applied at temperatures as low as 40°F * Interior or exterior surfaces * Acceptable for use in meat and poultry plants 2 Gal.
Simple-to-apply, non-skid additive that can be mixed into any of our Floor Savers™ products. ASSOCIATED PRODUCTS Cleaner Blend 300 Concrete Primer 1000 Epoxy Coat™ 6500 (Non VOC) Epoxy Coat™ 7000 (Non VOC) Epoxy Coat™ 7000 AR Epoxy Concrete Sealer Floor Grip™ Floor Patch™ Floor Patch™ (Fast Cure) Ultra Quartz™
Flexane®, versatile urethane compounds are used to make fast, economical, long-lasting rubber repairs to equipment such as conveyor belts and rubber rolls, and is also used to create non-damaging holding ﬁxtures, mold rubber parts, and pot electronic components. Flexane is available in liquid or putty form and its durometer is adjustable with the addition of Flex-Add™ Flexibilizer.
DEVCON Flexane® 80 Putty
Trowelable, 100% solids, tear-resistant urethane compound used to line and repair process equipment exposed to impact abrasion, vibration, expansion, and contraction. KEY FEATURES
High-performance, brushable urethane coating that cures to a medium hard rubber (Hardness Shore A 86) for protection against wear due to abrasion and impact. KEY FEATURES
* Cures to a tough, medium-hard rubber (Hardness 87 Shore A) * Easy-to-mix; smoothly trowels * Service temperatures to 180°F in dry environments and 120°F in wet environments * Bonds to metal, concrete, rubber, wood, and ﬁberglass surfaces * Used with Flexane® primers for maximum adhesion to metal, rubber, and concrete surfaces 1 lb. 4 lb.
* Applies in thicknesses of 50 mils in one application * Protects hoppers, chutes, pump impellers, feeder bowls, and fans * Used with Flexane® primers for maximum adhesion to metals, rubber, wood, ﬁberglass, and concrete 1 lb
Flexane® Fast-Cure Rubber Repair Putty
Fast-curing urethane that makes fast, convenient repairs to torn conveyer belts. This product is also used to coat metal splices and repair holes and gouges in rubber belting and other equipment. KEY FEATURES * 8-minute working time * No-mess dispensing with fast, easy, 400ml reusable cartridges * Automatic mix nozzle thoroughly mixes the two components (Nozzle tip can be trimmed to regulate the ﬂow for precise application) * Light service duty in 3 hours * Thixotropic , creamy formula which thickens in time * Replaces #15046 in the Flexane line 400 ml.
Flexane® High Performance Putty
High-performance, trowelable lining for maximum protection against wear due to abrasion, gouging and impact. KEY FEATURES * Lines and protects processing equipment and repairs rubber parts in the most aggressive environments * Cures to a tough (tear strength 400 pli), resilient rubber compound (Hardness 78 Shore A) * Bonds to metal, rubber, wood, ﬁberglass, and concrete * Used with Flexane® Primers for maximum adhesion 1 lb.
Flexane® Belt Repair Kit
A rubber repair kit that is an ideal, off-the-shelf solution for making fast, permanent emergency maintenance repairs to damaged conveyor belts, rubber rollers, and many other rubber or elastomeric components. KEY FEATURES * Contains two units each of Flexane® 80 Putty and Cleaner, one unit each of FL-10 and FL-20 primers, and one applicator tool * Makes belt repairs covering up to 188 square inches at ¼” thickness * Repairs and bonds to metals, concrete, rubber, wood, and ﬁberglass
Liquid additive that shortens the cure time of all Devcon® Flexanes, even in temperatures as low as 32º F (0ºC). KEY FEATURES * Recommended for maintaining functional cure schedule when using Flex-Add™ or Flexane® Primers * ½ teaspoon (2gm) reduces the cure time of 1 lb. Of Flexane® by 50% 12 oz.
Flexane® FL-10 Primer
Liquid primer used in conjunction with all Devcon® Flexanes in order to maximize the adhesion to metals and itself. KEY FEATURES * Required for bonding all Devcon® Flexanes 4 oz
DEVCON Flexane® FL-20 Primer
Liquid primer used in conjunction with all Devcon® Flexanes in order to maximize the adhesion to concrete, rubber, wood, ﬁberglass, and itself. KEY FEATURES * Provides maximum adhesion to rubber, wood, ﬁberglass, concrete, and Flexane® * Required for bonding of all Devcon® Flexanes * Listed under NSN Stock #8010-01343-4809 4 oz.
Flexane® FL-40 Primer
Liquid primer used in conjunction with all Devcon® Flexanes in order to maximze adhesion to rubber. System dries in ﬁve minutes and takes a maximum of 30 minutes in cool conditions KEY FEATURES * Provides maximum adhesion to rubber * Required for bonding of all Devcon® Flexanes * One par which dries in 5 minutes 4 oz.
Liquid Release Agent
Silicone-type liquid release agent that prevents Devcon® epoxy and urethane compounds from sticking to patterns or mold surfaces. KEY FEATURES * Produces a high gloss ﬁnish * Facilitates the accurate duplication of intricate details 1 pint
Flexane® 80 Liquid
Castable, non-shrinking, medium-viscosity (10,000 cps) urethane compound for making rugged, ﬂexible molds, forming dies, cast parts, non-scratching holding ﬁxtures and abrasion-and noise-resistant linings, as well as for encapsulating parts. KEY FEATURES * Two-component compound easy to mix and pour * Cures at room temperature to a semi-rigid rubber material * Makes precision molds that faithfully reproduce detail * Listed under NSN#8030-00-1449756 * Returns to its original shape after 350% elongation * Ten-hour demolding time 1 lb. 10 lb.
Flexane® 94 Liquid
Castable, non-shrinking, low-viscosity (6,000 cps) urethane compound that cures to a rigid rubber material (Hardness Shore A 97). KEY FEATURES * Makes ﬂexible molds and nonscratching holding ﬁxtures * Makes cast rubber replacement parts that may have been discontinued * Requires only a ﬁve hour demolding time * Hardness rated at 97 Shore A * Listed under NSN stock #8030-01036-9228 1 lb. 10 lb.
Edge & Seal T-35
Liquid urethane for edging fabric, felt belting used in the paper making industry. The product can also be used to encapsulate parts protecting them from exposure to chemicals, moisture and mechanical shock. KEY FEATURES * Self-leveling liquid * Black in color * Cures in 3 hours * Excellent insulating characteristics 400ml cartridge
Flexane®, versatile urethane compounds, are used to make fast, economical, long-lasting rubber repairs to equipment such as conveyor belts and rubber rolls, and is also used to create non-damaging holding ﬁxtures, mold rubber parts, and pot electronic components. Flexane is available in liquid or putty form and its durometer is adjustable with the addition of Flex-Add™ Flexibilizer.
Flexibilizer used with Flexane® 80 Liquid that produces a custom-mixed urethane for creating speciﬁc hardness (durometer) requirements. 8 oz.
DEVCON Anti-seize & Lubricants Permatex® Anti-Seize Compounds and Lubricants work to protect mated metal parts against in-service rusting, corrosion, friction, and galling and lubricate a wide array of machinery moving parts and components. Made to serve the demanding needs of even the most severe industrial environments. Anti-Seize reduces wrench torque and eases assembly and disassembly of threaded, slip-ﬁt, and press-ﬁt connections. Depend on Permatex ® Anti-Seizes to reduce friction and wear. Available in a variety of temperature ranges.
A heavy duty blend of aluminum, copper and graphite lubricants in a petroleum base. Use during assembly to prevent galling, corrosion and seizing and to assure easier disassembly. Inert, will not evaporate or harden in extreme temperatures. Salt, corrosion and moisture resistant. Temperature range -60ºF to 1600ºF (-51°Cto 871°C). KEY FEATURES * Prevents galling, seizing and corrosion * Lubricates assemblies up to 1600ºF (871°C) * Permits easy disassembly of parts * Meets Mil Spec-A-907 (except for aerosol 81464) 1-2-4-8-16 oz and 1 gallon
Nickel Anti-Seize Lubricant
Protects metal parts from seizing and galling at temperatures up to 2400°F (1316°C). Copper-free, use under conditions of extreme pressure and temperature, and with stainless steel, titanium and nickel alloys. KEY FEATURES * Highest temp resistance * Lubricates assemblies up to 2400ºF (1316°C) * Permits easy disassembly of parts 8 and 16 oz. brush top.
Food Grade Anti-Seize Lubricant
A non-drying, non-metallic, PTFE fortiﬁed synthetic-based lubricant that is NSF registered H1, and Kosher approved. Protects metal parts from rust, corrosion, seizing and galling up to 900°F (482°C). Use on threaded connections to lubricate, seal and prevent galling, wear and friction. Also lubricates machine parts, press ﬁts, shafts, and more. Effective on stainless steel, aluminum, iron, galvanized copper, brass, plastic and ﬁberglass. KEY FEATURES * NSF Registered H1 * Lubricates assemblies up to 900ºF (482°C) * Non-metallic * Permits easy disassembly of parts 8 oz. brush top.
Fast Break® Super Penetrant
Heavy-duty penetrant for rusted and frozen assemblies. Works quickly to penetrate and loosen rust, tar, grease, dirt, carbon deposits and corrosion from metal parts. Frees frozen nuts, bolts and ﬁttings in all types of assemblies. Level 3* KEY FEATURES * Frees corroded nuts, Bolts and ﬁttings * Quickly penetrates * Heavy-duty 16 oz can.
Dielectric Tune-Up Grease
Provides a moisture-proof barrier that lubricates and protects electrical equipment from salt, dirt and corrosion. High dielectric strength. Good thermal, oxidation and chemical stability. 5 gram pouch 3 oz.tube
Copper Anti-Seize Lubricant
A premium quality copper anti-seize and thread lubricant that may be used to prevent seizing, corrosion and galling where high temperature conditions exist. Temperature range -30°F to 1800°F (-34°C to 982°C). Provides good electrical conductivity. Meets Mil Spec A-907. KEY FEATURES * Contains micro-ﬁne copper ﬂakes for higher temp resistance * Lubricates assemblies up to 1800ºF (982°C) * Permits easy disassembly of parts 8 and 16 oz. brush top.
These epoxy compounds cure rapidly—even under water—to form strong, permanent repairs, minimizing spills to due leaks or accidental punctures as well as remediation costs.
Magic Bond™ Epoxy Stick
Two-part epoxy putty stick seals leaks and repairs gouges in steel, aluminum, wood, ﬁberglass, concrete, and ceramics. Cures rock-hard and can be painted, sanded, machined, tapped, or drilled when fully cured.
DEVCON Zip Patch™
High-technology, adhesive-impregnated patching system that cures at room temperature and makes permanent, waterproof ﬁeld repairs to pipes, tanks, and containers. KEY FEATURES kit
* Easy-to-use, fast-setting patch
* Hardens to a tough, durable waterproof ﬁnish in minutes * Excellent adhesion to iron, steel, stainless steel, titanium, ﬁberglass, aluminum, wood, ceramics, composites, acrylics, PVC, and most other plastics * Minimal surface preparation * Listed under NSN Stock #804001-309-1064 4 x 9 patch area
Underwater Repair Putty (UW)
High-performance technology for repairing, patching, and rebuilding equipment in habitually wet environments, including under water. KEY FEATURES * Penetrates wetness to bond securely to steel, iron, aluminum, brass, bronze, concrete, wood, and some plastics * Invaluable for use in pulp and paper mills, wastewater treatment plants, and marine environments * Eliminates the need for substrate to be thoroughly dry before repair * Non-rusting; easy-to-mix and apply * Cures in temperatures as low as 40°F * Listed under NSN Stock# 8010-01-120-8753 1 lb.
Retaining Compounds are designed to bond non-threaded, cylindrical, metal assemblies by ﬁlling the voids between close-ﬁtting metal parts. Retaining Compounds harden to create a solid, one-piece assembly. Retaining Compounds can be used to lock keyways, secure splines, augment press ﬁts, and strengthen interference ﬁts. Use them to prevent wear on new components, or restore the ﬁt to worn or outof-tolerance parts. Retaining Compounds seal joints against leakage and prevent fretting and corrosion. Formulated in a variety of viscosities, strength characteristics, gap-ﬁlling abilities, and temperature ranges, Permatex ® Retaining Compounds can solve even the most difﬁcult retaining applications.
Threadlockers - Gel
Permatex® Threadlocker Gels are the true innovation in threadlocking! Available in Medium Strength BLUE Gel and High Strength RED Gel, the unique GEL TWIST™ and GEL SQUEEZE™ applicators leave the threadlockers where you want it…on the part. No more liquid drips or solid stick globs to deal with. No more mess to clean or costly waste to worry about.
High Strength Threadlocker RED Gel in the GEL TWIST™ applicator
Speciality particulate ideal of containment and cleanup of chemical, acid and hydrocarbon spills. It is not recommended for use with hydroﬂuoric acid. KEY FEATURES
The patent-pending GEL TWIST™ pin-point applicator puts the Threadlocker where you want it...on the part! Gel formula provides “liquid-reliability” without drips, globs, mess or waste. High strength threadlocker for heavy-duty applications. Especially well suited for permanently locking studs. Locks against vibration loosening. Requires extra effort or special tools for removal.
* instantly converts liquids into solids for easy cleanup and disposal * leaves no slippery residue * three sizes to contain all types of spills
25 lb bag 7 lb. dispenser 3” diameter x 42” sock
* Threadlocker Gel - Red * High Strength * No drips, spills or globs * Pin-point application * Provides * Plant Engineering Product of the Year! 10 g GEL TWIST™ applicator, carded
DEVCON Medium Strength Threadlocker BLUE Gel in the GEL TWIST™ applicator
The patent-pending GEL TWIST™ pin-point applicator puts the Threadlocker where you want it...on the part! Gel formula provides “liquid-reliability” without drips, globs, mess or waste. All-purpose, medium strength threadlocker. Ideal for all nut and bolt applications 1/4 inch to 1 inch (6mm to 25mm). Eliminates need for stocking expensive lock nuts and lock washers. Locks and seals while preventing parts from loosening due to vibration. Protects threads from corrosion. Removable with hand tools for easy disassembly.
High Performance Thread Sealant Formulated speciﬁcally for metal, tapered pipe thread ﬁttings. High Performance Thread Sealant replaces Teﬂon® tape and pipe dopes. Cures rapidly to withstand 10,000 PSI. Prevents galling and protects mated threaded areas from rust and corrosion. Contains PTFE. 50 ml 250ml 1 Litre.
KEY FEATURES * Threadlocker Gel - Blue * Medium Strength * No drips, spills or globs * Pin-point application * Provides * Plant Engineering Product of the Year! 10 g GEL TWIST™ applicator, carded
Meduim Strength Threadlocker BLUE Gel in GEL SQUEEZE™ applicator
The GEL SQUEEZE™ applicator puts the Threadlocker where you want it...on the part! Gel formula provides “liquid-reliability” without drips, globs, mess or waste. High strength threadlocker for heavy-duty applications. Especially well suited for permanently locking studs. Locks against vibration loosening. Requires extra effort or special tools for removal. KEY FEATURES * Threadlocker GEL - Blue * Medium Strength * No drips, spills or globs! * No mess applicator system * Packaged for your toolbox 5 gram tube
High Temperature Thread Sealant Locks and seals threaded ﬁttings. Resists leakage, vibration loosening, moisture, hydraulic ﬂuids and diesel fuels. Lubricates threads for easy assembly and disassembly. Won’t shred or wear like Teﬂon® tape. Parts may be repositioned up to 4 hours after application. Temperature range from -65°F to 400°F (-54°C to 204°C). Contains PTFE. 50 ml 250ml 1 Litre.
Maximum Temperature Thread Sealant A high performance, solvent resistant sealant that locks and seals metal, tapered pipe threads and ﬁttings. Speciﬁcally formulated for aluminum, stainless steel, galvanized metal and other inert metals. Temperature range from -65°F to 400°F (-54°C to 204°C). Contains PTFE. 50 ml 250ml 1 Litre.
Soft Set Thread Sealant 61 White with PTFE
NSF -61 certiﬁed pipe sealant used with potable water piping sytems. Lubricates and seals all threaded connections. Use on PVC, CPVC,ABS, polyethylene, iron, steel copper or brass threads KEY FEATURES
Thread Sealants seal and secure metal pipes and ﬁttings by ﬁlling the space between threaded metal parts. Thread Sealants prevent leakage caused by vibration loosening, tape shredding, solvent evaporation, damaged threads, and temperature cycling. Designed for low and high-pressure applications, Thread Sealants seal instantly for on-line low pressure testing. When fully cured, they seal to the burst strength of most piping systems. The high lubricating properties of Permatex ® Thread Sealants ease assembly and prevent galling of the threads. For system repairs, parts may be disassembled with basic hand tools.
* Withstands up to 3,000 psi on gases from -50°F to 400°F * Withstands upt o 10,000 psi on liquids from -50°F to 500°F * Flexible, white non-hardening non-seperating paste with PTFE * NSF-61 certiﬁed * Withstands high pressure * Lead Free non seperating formula 8 oz. brush-top 16 oz. brush-top
DEVCON Pneumatic/Hydraulic Sealant
All Purpose Spray Adhesive
Designed for locking and sealing high pressure hydraulic and pneumatic systems. Contains no ﬁllers or particles which could contaminate system ﬂuids, foul valves, or clog ﬁne ﬁlters and screens. Reliably cures on “as received” fasteners and controlled locking strength affords easy disassembly.
* Prevent leaks in Pneumatic / Hydraulic systems * Won’t foul valves or clog ﬂiters 16 oz brush top bottle
Dries clear with superior bonding strength. For permanent or repositionable applications. Unique formula resists water and humidity. Applications include porous and nonporous materials.
* Fast tack * Repositionable or permanent bond * Safe on all surfaces 16 oz. aerosol can, 10.5 oz. net wt.
Pipe Joint Compound
Universal sealant. Lubricates and seals threaded joints on water, oil and fuel lines. Temperature range -65°F to 400°F (-54°C to 204°C); resists common shop ﬂuids. Use Soft Set Thread Sealant KEY FEATURES * General-purpose sealant * Temperature range -65°F to 400°F (-54°C to 204°C) 16 ozbottle
Aids precision ﬁtting of machined surfaces. Locates high spots on bearings, valves and other close-to-tolerance components. Non-drying. Easy cleanup. KEY FEATURES * Identiﬁes high spots on precision parts * Bright blue paste .75 ﬂ. oz. tube, carded
A solvent-based activator that can be used to speed the cure of Permatex® anaerobic products. Recommended for applications with inert surfaces or passive metals and with large bond gaps. Ideal activator when temperatures are below room temperature, especially when cure conditions are below 59° F (15°C.) KEY FEATURES * Speeds cure of Permatex® anaerobics * Use with inert surfaces or passive metals * Use during cold weather 1.75 oz. pump spray bottle 1 gallon bottle
Heavy Duty Rubberized Undercoating Now with an improved formula! Rubberized for maximum durability; seals, protects and insulates. Excellent professional blend all-purpose coating. KEY FEATURES * Dries to a ﬂexible tack-free ﬁlm * Good abrasion resistance 20 oz. aerosol can, 16 oz. net wt.
DEVCON Hand Cleaners
You need a waterless hand cleaner that really cleans - without turning your hands into sandpaper. You need the strength to remove grease, grime, paint, adhesives and all other soils your working hands get into - plus conditioners to prevent your hands from cracking and drying out. Permatex® hand cleaners are the choice of working hands. For over 50 years, Permatex has offered high-quality hand cleaners and has maintained a leadership position through innovation and a concern for users’ needs. Choose from industry leading brands such as Fast Orange®, Trounce® and Blue Label™.
Fast Orange® Pumice Lotion Hand Cleaner
Industrial grade, biodegradable*, waterless, petroleum solvent-free hand cleaner. It contains no harsh chemicals, mineral oils or ammonia that can sting cuts and abrasions. Pure, fresh-smelling natural citrus power does the cleaning while aloe, lanolin, glycerin and jojoba condition and protect skin. Fine Pumice formula gently deep cleans the toughest dirt and grease. Also removes resins, oil, tar, grime, soil, printer’s ink, epoxies, paint, rubber cement, gasket and tile cements.
Parr® Painter’s Clean™ Hand Cleaner
A safer alternative to harsh, drying and potentially toxic solvents and thinners. Fortiﬁed with four premium skin conditioners, this freshly-scented, ﬁne pumice formula quickly removes the toughest paints, stains and varnishes. Readily biodegradable*, nontoxic and nonﬂammable, Painter’s Clean™ Hand Cleaner has the muscle to clean where most hand cleaners fall short. KEY FEATURES * Cleans the dirtiest hands * Removes paints, stains and varnishes * Freshy scented, ﬁne pumice formula * Biodegradable according to 40 CFR 796.3240 15 ﬂ. oz. bottle w/nail brush 60 ﬂ. oz. w/pump
Universal dispenser allows for metered use of Permatex Hand Cleaners (product numbers 23104, 25104 and 35406). Designed to offer years of trouble-free, repeated use.
KEY FEATURES * Leading Industrial brand Hand Cleaner * Pumice formula * Fresh smelling natural citrus * Cleans the toughest dirt and grime * Fortiﬁed with skin conditioners * Biodegradable according to 40 CFR 796.3240 7.5 ﬂ. oz. bottle 15 ﬂ. oz. squeeze bottle 1/2 gallon bottle w/pump 1 gallon bottle w/pump 1 gallon ﬂat-top bottle
DL® Permatex® Blue Label
Cream formula waterless hand cleaner. Takes off many difﬁcult to remove substances yet is gentle to hands. Does not leave a greasy feeling after use. Cited by a leading consumer magazine as the bestperforming waterless hand cleaner. 14 oz. plastic tub 4.5 lb. plastic tub
Wall-Mounted Wire Bracket
Convenient wall-mounted wire bracket for outof-the-way storage of your favorite gallon of Permatex® hand cleaner.
Disposable Nitrile Gloves
Permatex® Nitrile Disposable Gloves are made from a 100% synthetic rubber that provides superior resistance to a wide range of solvents and hazardous chemicals.* Suitable for users with natural rubber latex sensitivity. They are fully textured to provide a secure grip on dirty parts and tools. Gloves are lightly powdered, which makes them easier to put on and take off. When superior chemical resistance is required, Nitrile Disposable Gloves provide users with ideal heavy-duty hand protection. KEY FEATURES * 100% synthetic rubbber * Resists broad range of solvents * Lightly powdered * Heavy-duty hand protection 100-ct. Box - Large 100-ct. Box - X-Large
WESTERN CANADAâ€™S PROBLEM SOLVER Victoria Nanaimo Courtenay Richmond Langley Port Coquitlam Kelowna Calgary Edmonton