KERAMIKA / CERAMICS
Gorenje ceramic tiles, technical data 1. Dry-pressed glazed tiles SIST EN 14411:2007 - Annex K - Group B II b - floor tiles (monocottura) Charasteristic
Gorenje Keramika
Standard Requirements
Method of testing
Length and width
Conforms
± 0,5 %
ISO 10545-2
Thickness
Conforms
± 5,0 %
ISO 10545-2
Straightness of sides
Conforms
± 0,5 %
ISO 10545-2
Rectangularity
Conforms
± 0,6 %
ISO 10545-2
Surface flatness
Conforms
± 0,5 %
ISO 10545-2
Surface quality
Conforms
min. 95 %
ISO 10545-2
Water absorption
6 - 10 %
6 - 10 %
ISO 10545-3
Bending strength
> 25 N/mm2
> 18 N/mm2
ISO 10545-4
Crazing resistance
Conforms
Required
ISO 10545-11
Gorenje ceramic tiles, group B II b, are used for indoor tiling of floors and walls, where there is no danger of freezing. Kitchen and bathroom programme includes tiles from group B III and B II b, in combination for walls and floor. Tiles from B II b group are separately presented in floor tiles programme.
Chemical resistance: • low acid and alkaline concentrations • household chemicals and swimming pool salts Odpornost proti madežem
GLA GA 5
As indicated by the manufacturer min 3
ISO 10545-13
ISO 10545-14
2. Dry-pressed glazed tiles SIST EN 14411:2007 - Annex L - Group B III - wall tiles (monoporosa) Charasteristic
Gorenje Keramika
Standard Requirements
Method of testing
Length and width
Conforms
± 0,5 %
ISO 10545-2
Thickness
Conforms
± 10 %
ISO 10545-2
Straightness of sides
Conforms
± 0,3 %
ISO 10545-2
Rectangularity
Conforms
± 0,5 %
ISO 10545-2
Central curvature and
Conforms
± 0,5 %
ISO 10545-2
Curvature of edges
Conforms
± 0,3 %
ISO 10545-2
Deformation
Conforms
± 0,5 %
ISO 10545-2
Surface quality
Conforms
min. 95 %
ISO 10545-2
Water absorption
Conforms
> 10 %
ISO 10545-3
Bending strength
> 20 N/mm2
> 15 N/mm2
ISO 10545-4
Crazing resistance
Resistant
Required
ISO 10545-11
• househ. chemicals and swimm. pool salts
GA
min. GB
ISO 10545-13
Resistance to staining
5
min. 3
ISO 10545-14
Chemical resistance:
Abrasion Resistance - PEI: the standard classifies floor ceramic tiles into six classes
Group B III tiles are intended for indoor tiling of walls in the rooms that are not subject to freezing conditions. Advice on laying Gorenje single-fired tiles can be installed by using either traditional cement mortar or modern tile adhesives with plastic separators for grout joints. It is advisable to immerse the tiles in water before laying to remove any dust from the surface that could diminish the adhesive performance. Group B III tiles must be immersed in water prior to laying due to their absorption characteristics. Please follow the instructions of the manufacturers of adhesives and grouts.
PEI class
Possible application
Class 0
Glazed tiles of this class are not recommended for the use on floors.
Class I
Suitable for areas that are walked on essentially with soft footwear or barefoot without any scratching dirt (e.g. residential bathrooms and bedrooms without direct access from the outside).
Class II
Suitable for areas where mostly soft or normal footwear is worn, and are only occasionally subject to minor amounts of scratching dirt (e.g. general residential areas except kitchens, entrance halls or other rooms with heavy traffic). This does not apply to rustic footwear, e.g. hobnailed boots.
Class III
Suitable for areas where normal footwear is worn, and are more often subject to minor amounts of scratching dirt (for example kitchens, halls, corridors, balconies, loggias and terraces). This does not apply to rustic footwear, e.g. hobnailed boots.
Class IV
Suitable for areas subject to regular traffic and scratching dirt. The conditions are more severe than for Class 3 (e.g. entrances, commercial kitchens, hotels, showrooms and shops).
Class V
Suitable for areas that are subject to intensive public traffic and scratching dirt, i.e. for the most severe conditions where ceramic tiles may still be installed (e.g. public areas such as shopping centres, airports, hotel lobbies, public walkways and industrial applications).
This classification is given as guideline only and does not provide accurate product specifications.
120