SECTION
14
Chimney Temperature Engineered Chimney Offsets
Flashings
For use in pairs to permit chimney to “go around” joist, rafters or other projections. Add chimney sections between offsets to produce additional offset. Offsets are available with a stainless steel outer wall for corrosive environments.
Round Flashing Available in galvanized and aluminum models flat to 6/12 pitch (Standard) and for steeper pitches of 7/12 to 12/12 pitch, 13/12 to 18/12 pitch and 19/12 to 24/12 pitch.
Elbows mfr# 6HS-015 8HS-015 6HS-030 8HS-030 6HSS-030 8HSS-030
size webb# 6”, 15° 46034 8”, 15° 46070 6”, 30° 46035 6”, 30° 46071 6”, 30°, SS 256236 8”, 30°, SS 245838
mfr# 6F 6FFU12 8F 8FFU 8FFU12
size webb# 6”, Standard 46039 6”, Standard 46040 8”, Standard 46075 8”, Med Pitch 256238 8”, Standard 46076
Tall Cone Flashing For flat to 1/12 pitch roofs. Use on flat roofs in snowpack areas to reduce chances of leakage.
Attic Insulation Shield Required shield for use in unoccupied attic areas to prevent insulation material from infringing on the 2 in. air space clearance. mfr# 6HS-AIS 8HS-AIS
size 6” 8”
webb# 153638 46414
Cap Durable, all stainless steel constructed cap is designed to minimize downdraft. Features its own spark arrestor and bird debris screen. mfr# 6HS-RCS 8HS-RCS 10FB-RC
size 6” 8” 10”
webb# 46091 46139 46288
Firestop Assembly Firestop is required at each floor level, except at ceiling support or roof support. Provides correct spacing to combustible materials as the chimney passes through a combustible floor. mfr# size 6HS-FSA 6” 8HS-FSA 8”
mfr# size webb# 6FT 6”, Tall Cone 46038 8FT 8”, Tall Cone 46074
Ceiling Support Assembly Use when chimney is installed in flat ceiling. 6” and 8” sizes fit between regular 16” O.C. ceiling joists. Cartoned to contain stainless steel flat black single wall adaptor. (For exposed-beam ceiling installations, use Roof Support Assembly). Flat black finish. mfr# size 6HS-CSA 6” 8HS-CSA 8”
webb# 46080 46128
Anchor Plate Use to support and connect chimney sections to a masonry firebox or an appliance which is specifically listed for direct connection to a plate and chimney system. mfr# 8HS-AP
size 8”
webb# 46134
webb# 46096 46144
Storm Collar Use with flashing to insure water-tight installation. mfr# 6SC 10SC
214
size 6” 10”
webb# 47072 46289
F.W. Webb Company
fwwebb.com