STUDENT TECHNOLOGISTS AND ENTREPRENEURS OF THE PHILIPPINES SKILLS DEVELOPMENT AND COMPETITIONS
Technical – Vocational Category JOB ORDER I.
CONTEST AREA
II.
SKILLS CONTEST
:
ARTS & TRADES - FURNITURE & CABINET MAKING :
III. SPECIFIC INSTRUCTIONS
CONSTRUCTION OF CENTER TABLE
:
1. Time allotment is 6 hours 2. The contest is good for one contestant only and open to 2nd to 4th year level duly certified by the school principal, division and regional coordinator 3. The working drawing of the contest piece center table will be based from the FCM NC test package which will be given before the start of the contest. 4. Bench woodworking tools shall be used in the competition. Use of power tools is allowed. 5. Proper joints will be applied and glued. 6. Contestant must bring their own tools. 7. The contestant must raise one hand after finishing the project then fix his work area and tools. 8. The contestant should be ready to defend how he/she accomplished the project when asked by the judges. 9. During the actual contest, judges/coaches maintain 3 meters away from the contest area.
VI. RESOURCES
: Contestant/s
Tools
Organizer/s
1. Pull-push/zigzag rule
1. Top Board 20x600x800mm
2. Cross-cut saw
2. Legs 45x45x420 mm
3. Smooth plane
3. 2 pieces rails 20x60x500
4. Claw hammer
4. 2 pieces rails 20x60x700
5. Try square
5.
2 pieces mouldings 10x20x850
6 Chisel(assorted sizes) 7. Nail set Equipment
Materials
1. Portable planer 2. Portable sander 1. 2. 3. 4.
finishing nails wood glue sand paper working bench