EXTENSION MODULES FOR Series WS The wallmount and membrane protected Intercom stations of Series WS can be custom enhanced with powerful extra features by means of extension modules. These can be mounted above, below or on either side of the Intercom station, or positioned freely within the room. For example, loudspeaker modules are usually placed fairly high up for indoor or outdoor public address purposes. These extension modules are protected against dust, dirt and water jets and carry an IP 65 rating. Surface Mount and Flush Mount Kits are available separately – see Accessories.
Camera Module WSCM 50P Camera module with colour video camera, adjustable white balance and built-in heater. Can be used as an IP network camera (M-JPEG video format with max. resolution of 640 x 480 pixels) or as analogue camera for colour systems PAL or NTSC. Viewing angle mechanically adjustable horizontally/vertically by 30°. Polycarbonate construction. External power supply via 22 – 24 V AC / 20 – 35 V DC power adapter or via PoE IEEE 802.3af. Dimensions when flush mounted: W 165 mm, H 140 mm, D 13 mm 450 g Dimensions when surface mounted: W 165 mm, H 140 mm, D 51 mm (dimensions do not include 20 mm camera top clearance)
TFT Display Module WSTM 50P Colour-TFT display module for IP based video streams or analogue video signals in PAL or NTSC. Polycarbonate construction. 3.5” Colour-TFT display; resolution: 320 x 240 pixels; 65,000 colours; External power supply via 22 – 24 V AC / 20 – 35 V DC power adapter or via PoE IEEE 802.3af. Dimensions when flush mounted: W 165 mm, H 140 mm, D 13 mm 410 g Dimensions when surface mounted: W 165 mm, H 140 mm, D 51 mm
Expansion Card WSEB RJ45 Expansion card for integration in cameras and TFT display extension modules of Series WS. Installing an IP Intercom station with an extension module for a camera or TFT display typically requires two ports on the switch. The expansion card provides an additional downlink port on the module. This solution occupies only one port on the switch; it also requires less cabling and still leaves the option of simply adding these modules later on as needed.
Mobile Phone Detection Module WSPD 50P Module for detecting mobile speech and data communication over GSM and UMTS networks. Polycarbonate construction. Power supply: 20 – 30 V DC, max. 1.5 W; one floating relay output (Open contact); detectable frequency range: GSM: 880 – 950 MHz and 1710 – 1840 MHz; UMTS: 1900 – 2170 MHz. Dimensions when flush mounted: W 165 mm, H 140 mm, D 13 mm 205 g Dimensions when surface mounted: W 165 mm, H 140 mm, D 51 mm
Handset Module WSHS 50P Handset with integral “Push to Talk” button. Polycarbonate construction. WSHS 50P
Version for installation via screw terminal
WSHS 50P-JST Version with JST connector Dimensions when surface mounted: W 82 mm, H 280 mm, D 51 mm
34 | Intercom Terminals |
420 g