21 n
LFO Page: LFO Controls 01. Press [MODE] + Pad 11 to enter GLOBAL PROGRAM EDIT Mode, then 'LFO' (F3). 02. Set/ change the following parameters... (for additional info about the Low Frequency Oscillator, please refer to page 77 of the AKAI manual v.2) WAVE FORM: select from TRIANGLE, SINE, SQUARE, SAW, SAW DOWN, or RANDOM. RATE: Sets the cycle time (speed) of the LFO (00.00 - 99.00). DELAY: Sets the delay time (time before the LFO starts). PITCH: Adjust the pitch variation applied to the sample from 0-100 (Vibrato effect). FLT1/2: Sets the value of the filter applied to the sample from 0-100 (WOW effect). LEVL: Adjust the change of volume in a sample from 0-100 (Tremolo effect). TIP: Utilize the WHOLE function to quickly apply settings to all pads. Hold SHIFT while turning the DATA wheel to increase the change of values by 10 times.
n
MUTE Page: Simult / Mute Group Settings 01. Press [MODE] + Pad 11 to enter GLOBAL PROGRAM EDIT Mode, then 'MUTE' (F4). 02. Adjust the following parameters... (for additional info about the Mute Groups, please refer to page 74 of the AKAI manual v.2) MODE: select MUTE or SIMULT. TARGET 1-4: Select the pad(s) (A01-D16) to be muted or simultaneously played back by turning DATA wheel. GROUP: Combines various pads with mute or simult settings to create up to 32 groups . TIP: Utilize the WHOLE function to quickly apply settings to all pads. Hold SHIFT while turning the DATA wheel to increase the change of values by 10 times.
MPC 1000 v4 Operator’s Manual rev 3.5