Window Material - Sheets Crystal Clear “20/20”
Strataglass - Scratch Resistant Glass
▲ Clear press-polished vinyl sheet produced by Strataglass. ▲ Same quality clarity, and perfection as Strataglass. ▲ Available only in full drums.
▲ Leading scratch resistant clear vinyl. ▲ Tested to 12 years accelerated UV. ▲ Easy roll-up, the same as regular vinyl. ▲ Available only in full drums. ▲ UV Blocking. ▲ Use: boat curtains, automotive windows, tent & awning applications.
Canvas Designers Inc, FL.
Crystal Clear - Clear Part No. K130/5 K140/3 K140/5
Gauge Thickness: mm/in 0.76 1.02 1.02
0.030 0.040 0.040
Width: mm/in 1370 1370 1370
Sheet Length: mm/in 54 54 54
2820 2820 2820
Sheets Per Drum
111 11 111
5 3 5
Strataglass – Care & Maintenance We recommend using only IMAR Strataglass Protective Polish, IMAR Strataglass Protective Cleaner and mild soap (preferably IMAR Yacht Soap Concentrate) on Strataglass. (We no longer recommend the use of any other products regardless of the manufacturer’s claims.)
▲ Use of RAINEX on Strataglass appears to work for a short time but then dulls the surface and presents an ‘Orange Peel’ effect. Do not use RAINEX. ▲ Use of cleaners, polishes, scratch Caution! removers, or any other product made from regular, uncoated vinyl will damage Strataglass. Do not use these products. ▲ DO NOT HANDLE STRATAGLASS (OR ANY VINYL) WITH SUNSCREEN ON YOU HANDS! This will permanently cloud the vinyl where handled.
General Maintenance When New: 3M Adhesive Remover may be used to remove glue left from fabrication. Final clean with IMAR Strataglass Protective Cleaner. We recommend using IMAR Strataglass Protective Polish as the final step in installation to provide a base of protection and a good watershed. For the Customer: We recommend using imar Strataglass Protective Polish every 2 – 3 months (every 4 – 6 weeks in areas of high fallout). In the interim, use IMAR Strataglass Protective Cleaner frequently. Note: All new vinyl can easily get impressions on itself. We recommend new enclosures to be left in place to the extent possible. If completely removed must be interleaved with either acid-free paper (available from framing shops) or old sheets (the best choice) to prevent ‘pooling’ in the glass. Vinyl ‘seasons’ over time and becomes less impressionable. Roll all curtains down and fasten in place nightly to keep perfect appearance. (Review this information at: www.strataglass.com)
Email: info@bainbridgeint.com
Canvas Designers Inc, FL.
Strataglass - Clear Part No.
Gauge Thickness: mm/in
Width: mm/in
Sheet Length: mm/in
Sheets Per Drum
K305/2 K305/5
0.76 0.76
0.030 0.030
1370 1370
54 54
2820 2820
111 111
2 5
K310/2 K310/5
1.02 1.02
0.040 0.040
1370 1370
54 54
2820 2820
111 111
2 5
K315/2
1.50
0.060
1370
54
2820
111
2
Strataglass - Smoke Tint Part No. K310/2SM K310/5SM K315/2LSM
Gauge Thickness: mm/in 1.02 1.02 1.02
0.040 0.040 0.040
Width: mm/in 1370 1370 1370
Sheet Length: mm/in 54 54 54
2820 2820 2820
111 111 111
Sheets Per Drum 2 5 2
Tips to Fabricators: 1 Lay out material that you will be using the night before you plan to work with it. Some marking may have occurred during transportation, this will come out with warmth. Concerning areas may be heated with a heat gun for instant clear up. Hold the heat gun 4 – 6 inches away from the product and work in 12 inch areas at a time. After a few minutes, as the product reaches temperature gradient, it will clear up completely. It has a memory and that memory is the perfect flatness it had coming off the press plates. 2 DO NOT use ‘saran wrap’ or cling wrap or any vinyl products to protect the sheets. Use craft paper or the tissue the product comes with. 3 DO NOT stack the curtains up without interleaving with paper or something to keep the glass from clinging to itself, but not a vinyl fabric! Should distortion occur, use a heat gun to heat up the surface and return the product to its ‘memory’. 4 If installing in cold weather, it is strongly recommended that you heat up the enclosure as you are installing and stretch the product into position.
33