Tower Modification Material

Page 1

M

T O W E R M O D I F I C AT I O N M AT E R I A L - G U Y E D T O W E R S

ROHN MODEL 80 GUYED TOWER S TA N D A R D G U Y B R A C K E T S F O R 8 3 & 8 4 S E C T I O N S (2 3/8” & 2 7/8” O.D. LEGS) GA80 Bill of Material

3

Item 1 2 3 4

2* Torque Bar Shown

1

Qty. 3 3 6 9

Part No. KC143 KC145 210047GA 210058GA

Description Bar Flat Bracket Guy .38 x 4.5 x4.5’ Bar Flat TA 2.75 x .38 x 1.82’ Bolt Assembly 3/4 x 2 HSB A325 Bolt Assembly 3/4 x 5 HSB A325

These guy brackets are designed for 5/8” EHS maximum guys at 80% guy radius. For use on ROHN Model 80 tower only, supported on brace clips. For single braced standard sections, guy bracket must be used at the top of the section.

4

For double braced standard sections, guy brackets may be used at any panel point.

Tower Brace (REF)

ROHN MODEL 80 GUYED TOWER S TA N D A R D G U Y BRACKETS FOR 85 SECTIONS (3 1/2” O.D. LEGS) GA85 Bill of Material 5 3 5

2* Torque Bar Shown

1 Tower Brace (REF)

4

Item 1 2 3 4 5

Qty. 3 3 6 9 3

Part No. KC144 KC465 210050GA 210059GA KC441

Description Bar Flat Bracket Guy .38 x 5 x 4.5’ Bar Flat TA .38 x 3.5 x1.83’ Bolt Assembly 3/4 x 2-3/4 HSB A325 Bolt Assembly 3/4 x 5-1/2 HSB A325 Spacer Bracket Guy .63 x 3.13 x 4.5”

These guy brackets are designed for 5/8” EHS maximum guys at 80% guy radius. For use on ROHN Model 80 tower only. For single braced standard sections, guy bracket must be used at the top of the section. For double braced standard sections, guy brackets may be used at any panel point.

282

Phone (309) 566-3000 • Fax (309) 566-3079 • www.rohnnet.com • The Industry Standard © 2011 ROHN PRODUCTS LLC

T O W E R M O D I F I C AT I O N M AT E R I A L - G U Y E D T O W E R S

M

TORQUE ARM C H A N N E L A S S E M B LY F O R 8 0 T O W E R S

Available Sizes: • 10” Channel (C10x15.3) • 12” Channel (C12x20.7) • 15” Channel (C15x33.9)

Tower Leg Clamp

To order, provide leg size and desired channel size. Bolt Assembly with Beveled Washers Equalizer Plate

Tower Leg Bolt Assembly

Bottom Plate Bolt Assembly with Beveled Washers

NOTE: For single braced sections, torque arm must bear on brace clips above flange plates. For double braced sections, torque arm must bear on brace clips at any panel point.

Phone (309) 566-3000 • Fax (309) 566-3079 • www.rohnnet.com • The Industry Standard © 2011 ROHN PRODUCTS LLC

283

M

T O W E R M O D I F I C AT I O N M AT E R I A L - G U Y E D T O W E R S

REINFORCEMENTS FOR 80 SERIES TOWERS S TA N D A R D PA R T S AVA I L A B L E F O R T O W E R M O D I F I C AT I O N S AND FIELD REINFORCEMENT

Detail of bolt-on midspan horizontal brace.

To order, provide leg size and size of horizontal desired.

Detail of horizontal girt.

Added braces are shown as a bold line.

284

Phone (309) 566-3000 • Fax (309) 566-3079 • www.rohnnet.com • The Industry Standard ©2011 ROHN PRODUCTS LLC

M

T O W E R M O D I F I C AT I O N M AT E R I A L - G U Y E D T O W E R S

REINFORCEMENTS FOR 80 SERIES TOWERS S TA N D A R D PA R T S AVA I L A B L E F O R T O W E R M O D I F I C AT I O N S AND FIELD REINFORCEMENT Similar reinforcements available for 90 series towers. X-Brace Lug Requirements (Pipe) Leg O.D. Assy. P/N Lug P/N (1) U-Bolt Assy. (4) 2.38 KB497A KB299 JR83A 2.38 KB497ASP KB299SP JR84A 2.88 KB498A KB489 JR84A 2.88 KB498ASP KB489SP JR88A 2.88 KB498ASP1 KB489SP1 JR89A 3.50 KB499A KB492 JR88A

Detail of bolt-on lug.

For 80 Series towers

X-Brace Lug Requirements (Solid Rod) Leg O.D. Assy. P/N Lug P/N (1) U-Bolt Assy. (4) 2.25 KB565A KB555 JR83A 2.50 KB566A KB556 JR83A 2.75 KB567A KB557 JR84A 3.00 KB568A KB558 JR84A 3.25 KB569A KB559 JR88A

Standard Bracing Available Part No. KB35R KB36R 210018GA

Bracing (16 GA) Description 1.50” Tube, 16GA Diagonal 1.50” Tube, 16GA Horizontal 1/2 x 1-1/2 A325 Bolt Assy.

Part No. KB37R KB38R 210019GA

Bracing (11 GA) Description 1.50” Tube, 11GA Diagonal 1.50” Tube, 11GA Horizontal 1/2 x 1-3/4 A325 Bolt Assy.

Standard and Heavy Duty replacement braces are available. To order heavy duty braces, specify leg size and desired brace size.

of bolt-on horizontal brace. DetailDetail of bolt-on midspan horizontal bracket.

For 80/90 Series towers Added braces are shown as a bold line. Phone (309) 566-3000 • Fax (309) 566-3079 • www.rohnnet.com • The Industry Standard © 2011 ROHN PRODUCTS LLC

285

M

TOWER MODIFICATION MATERIAL - SELF-SUPPORTING TOWERS

SELF-SUPPORTING REINFORCEMENTS S TA N D A R D PA R T S AVA I L A B L E F O R T O W E R M O D I F I C AT I O N S AND FIELD REINFORCEMENT

Horizontal Girt (Typ) Girt Support Bracket

Tower Leg (Ref ) Diagonal Tower Braces

Bolt Assembly

Added horizontal girt to increase leg capacity (TYP) 1/2” Leg U-bolt

Center Plate

Bolt on brackets are available for all SSV towers.

Girt Support Bracket Bolt Assemblies

Center Plate

1/2” Leg U-Bolt

286

Diagonal Tower Braces (Ref )

Horizontal Girt (Typ)

VIEW A-A

Phone (309) 566-3000 • Fax (309) 566-3079 • www.rohnnet.com • The Industry Standard © 2011 ROHN PRODUCTS LLC

TOWER MODIFICATION MATERIAL - SELF-SUPPORTING TOWERS

M

SSMW SELF-SUPPORTING REINFORCEMENTS S TA N D A R D PA R T S AVA I L A B L E F O R T O W E R M O D I F I C AT I O N S AND FIELD REINFORCEMENT

Added redundants to increase brace and leg capacity (TYP)

U-bolt Connection (Typical)

Bolt-on brackets are available for all SSMW legs and internal braces.

INTERNAL TOWER VIEW (Hip Bracing)

Phone (309) 566-3000 • Fax (309) 566-3079 • www.rohnnet.com • The Industry Standard © 2011 ROHN PRODUCTS LLC

287

M

T O W E R M O D I F I C AT I O N M AT E R I A L

GUY ANCHOR SELECTION CHART GUYS ULTIMATE SIZE & TYPE STRENGTH (LBS)

TURNBUCKLES ULTIMATE SIZE STRENGTH (LBS)

ANCHOR RODS COMPATIBLE WITH TURNBUCKLE SIZE GAC

3/16EHS

3990

3/8

6000

1/4EHS

6650

1/2

11000

GAR

GAC

GAC34

5/16EHS

11200

5/8

17500

GAR

GAC

GAC34

GAC56

3/8EHS

15400

5/8

17500

GAR

GAC34

GAC56

7/16EHS

20800

3/4

26000

GAR

GAC34

GAC56

GAC57

1/2EHS

26900

7/8

36000

GAC56

GAC57

9/16EHS

35000

7/8

36000

GAC56

GAC57

5/8EHS

42400

1

50000

3/4EHS

58300

1-1/4

76000

GAC57

GAC58

GAC59

GAC58

GAC59

ANCHOR RODS Type

Part No. Weight (lbs.) D L A B C T GAR30 9 5/8” 84” 1” 2” 13 5/8” 3/16” GAC303 84” 2” 1” GAC305 14 5/8” 3/16” 84” 2” 1” 25 3/4” 84” 2” 12” 1” 3/8” GAC3455TOP 65 120” 2-1/2” 12” 1-1/4” 1-1/4” 1/2“ GAC5655TOP 125 168” 3” 12” 1-3/8” 1-7/16” 3/4” GAC5755TOP GAC5855TOP 220 192” 4” 12” 1-3/4” 1-1/4” 1” 310 240” 4” 18” 1-3/4” 1-7/16” 1” GAC5955TOP

GAR GAC GAC GAC34 GAC56 GAC57 GAC58 GAC59

GAR30

GAC303

GAC3455TOP (5) 11/16”HOLES

GAC5855TOP

GAC305

GAC5655TOP

GAC5955TOP

(3) 9/16”HOLES

(5) 13/16”HOLES

(5) 9/16”HOLES

(5) 15/16”HOLES

1/2” dia. bolts provided

C

(5)1-3/16”HOLES

GAC5755TOP

A A

(5) 1-3/16”HOLES

C

A

C T

C

A

T

3/4” dia. bolt included (2) 3/16” plates, one on each side

L

L

L

GAR30 Anchor Rod

288

D

D

5-1/4"

5-1/4"

L

D

D

B

B

NOTE: GAC Anchors require use of eye and eye turnbuckles. All other anchors are for use with eye and jaw turnbuckles. Refer to page 297. Phone (309) 566-3000 • Fax (309) 566-3079 • www.rohnnet.com • The Industry Standard © 2011 ROHN PRODUCTS LLC

Issuu converts static files into: digital portfolios, online yearbooks, online catalogs, digital photo albums and more. Sign up and create your flipbook.